Merge tag 'omap-for-v3.9/usb-signed' of git://git.kernel.org/pub/scm/…

…linux/kernel/git/tmlind/linux-omap into next/soc

These changes contain the OMAP USB related platform data changes
that were dropped from linux next because of the merge conflicts
as requested by me and Olof. The reason was that at this point
we really should be able to do the arch/arm related changes
separately from driver changes to avoid dependencies between
branches.

These patches were initially part of the USB related MFD patches.
Based on our comments, Roger Quadros quickly reworked these
patches into a shared branch between ARM SoC tree and the MFD
tree, then separate patches for the OMAP platform data and
MFD driver.

Note that this branch will conflict with c1d1cd5
("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
for the merge resolution.

[arnd - resolved the merge conflict]

Signed-off-by: Arnd Bergmann <[email protected]>

Documentation/kernel-parameters.txt

@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocbs_poll	[KNL,BOOT]
+	rcu_nocb_poll	[KNL,BOOT]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,

Documentation/x86/boot.txt

@@ -57,7 +57,7 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
-Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
+Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
 	 	to struct boot_params for for loading bzImage and ramdisk
 		above 4G in 64bit.
 

MAINTAINERS

@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:	Haavard Skinnemoen <[email protected]>
 M:	Hans-Christian Egtvedt <[email protected]>
 W:	http://www.atmel.com/products/AVR32/
-W:	http://avr32linux.org/
+W:	http://mirror.egtvedt.no/avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Maintained
 F:	arch/avr32/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arm/include/asm/memory.h

@@ -37,7 +37,7 @@
  */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
-#define TASK_UNMAPPED_BASE	(UL(CONFIG_PAGE_OFFSET) / 3)
+#define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
 /*
  * The maximum size of a 26-bit user space task.

arch/arm/mach-exynos/Kconfig

@@ -414,7 +414,7 @@ config MACH_EXYNOS4_DT
 	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
-	select PINCTRL_EXYNOS4
+	select PINCTRL_EXYNOS
 	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.

arch/arm/mach-omap2/board-3430sdp.c

@@ -424,7 +424,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-3630sdp.c

@@ -53,7 +53,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-am3517crane.c

@@ -40,7 +40,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-am3517evm.c

@@ -274,7 +274,7 @@ static __init void am3517_evm_mcbsp1_init(void)
 	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
 		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)

arch/arm/mach-omap2/board-cm-t35.c

@@ -418,7 +418,7 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-cm-t3517.c

@@ -166,7 +166,7 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO	(147)
 #define USB_HUB_RESET_GPIO	(152)
 
-static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
+static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-devkit8000.c

@@ -435,7 +435,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
 	&omap_dm9000_dev,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-igep0020.c

@@ -526,7 +526,7 @@ static void __init igep_i2c_init(void)
 	omap3_pmic_init("twl4030", &igep_twldata);
 }
 
-static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -537,7 +537,7 @@ static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
 	.reset_gpio_port[2] = -EINVAL,
 };
 
-static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -430,7 +430,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&madc_hwmon,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap3evm.c

@@ -538,7 +538,7 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }
 
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap3pandora.c

@@ -567,7 +567,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_backlight,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -361,7 +361,7 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -309,7 +309,7 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap4panda.c

@@ -139,7 +139,7 @@ static struct platform_device *panda_devices[] __initdata = {
 	&btwilink_device,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-overo.c

@@ -457,7 +457,7 @@ static int __init overo_spi_init(void)
 	return 0;
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-zoom.c

@@ -92,7 +92,7 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/usb-host.c

@@ -37,11 +37,6 @@
 #define	USBHS_UHH_HWMODNAME	"usb_host_hs"
 #define USBHS_TLL_HWMODNAME	"usb_tll_hs"
 
-static struct usbhs_omap_platform_data		usbhs_data;
-static struct usbtll_omap_platform_data		usbtll_data;
-static struct ehci_hcd_omap_platform_data	ehci_data;
-static struct ohci_hcd_omap_platform_data	ohci_data;
-
 /* MUX settings for EHCI pins */
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
@@ -477,32 +472,18 @@ void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
+void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 {
 	struct omap_hwmod	*uhh_hwm, *tll_hwm;
 	struct platform_device	*pdev;
 	int			bus_id = -1;
-	int			i;
-
-	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
-		usbhs_data.port_mode[i] = pdata->port_mode[i];
-		usbtll_data.port_mode[i] = pdata->port_mode[i];
-		ohci_data.port_mode[i] = pdata->port_mode[i];
-		ehci_data.port_mode[i] = pdata->port_mode[i];
-		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
-		ehci_data.regulator[i] = pdata->regulator[i];
-	}
-	ehci_data.phy_reset = pdata->phy_reset;
-	ohci_data.es2_compatibility = pdata->es2_compatibility;
-	usbhs_data.ehci_data = &ehci_data;
-	usbhs_data.ohci_data = &ohci_data;
 
 	if (cpu_is_omap34xx()) {
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
 
 		if (omap_rev() <= OMAP3430_REV_ES2_1)
-			usbhs_data.single_ulpi_bypass = true;
+			pdata->single_ulpi_bypass = true;
 
 	} else if (cpu_is_omap44xx()) {
 		setup_4430ehci_io_mux(pdata->port_mode);
@@ -522,15 +503,15 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	}
 
 	pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
-				 &usbtll_data, sizeof(usbtll_data));
+				pdata, sizeof(*pdata));
 	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod device %s\n",
 		       USBHS_TLL_HWMODNAME);
 		return;
 	}
 
 	pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
-				&usbhs_data, sizeof(usbhs_data));
+				pdata, sizeof(*pdata));
 	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s\n",
 		       USBHS_UHH_HWMODNAME);
@@ -540,7 +521,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 
 #else
 
-void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
+void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 {
 }
 

arch/arm/mach-omap2/usb.h

@@ -53,26 +53,8 @@
 #define USBPHY_OTGSESSEND_EN	(1 << 20)
 #define USBPHY_DATA_POLARITY	(1 << 23)
 
-struct usbhs_omap_board_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-
-	/* have to be valid if phy_reset is true and portx is in phy mode */
-	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
-
-	/* Set this to true for ES2.x silicon */
-	unsigned			es2_compatibility:1;
-
-	unsigned			phy_reset:1;
-
-	/*
-	 * Regulators for USB PHYs.
-	 * Each PHY can have a separate regulator.
-	 */
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-};
-
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
 
 extern void am35x_musb_reset(void);
 extern void am35x_musb_phy_power(u8 on);

arch/arm/mach-realview/include/mach/irqs-eb.h

@@ -115,7 +115,7 @@
 /*
  * Only define NR_IRQS if less than NR_IRQS_EB
  */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 128)
 
 #if defined(CONFIG_MACH_REALVIEW_EB) \
 	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))

arch/arm/mm/dma-mapping.c

@@ -640,7 +640,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 
 	if (is_coherent || nommu())
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (gfp & GFP_ATOMIC)
+	else if (!(gfp & __GFP_WAIT))
 		addr = __alloc_from_pool(size, &page);
 	else if (!IS_ENABLED(CONFIG_CMA))
 		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);

arch/avr32/include/asm/dma-mapping.h

@@ -336,4 +336,14 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif /* __ASM_AVR32_DMA_MAPPING_H */

arch/blackfin/include/asm/dma-mapping.h

@@ -154,4 +154,14 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	_dma_sync((dma_addr_t)vaddr, size, dir);
 }
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif				/* _BLACKFIN_DMA_MAPPING_H */

arch/c6x/include/asm/dma-mapping.h

@@ -89,4 +89,19 @@ extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
 #define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+				    struct vm_area_struct *vma, void *cpu_addr,
+				    dma_addr_t dma_addr, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size)
+{
+	return -EINVAL;
+}
+
 #endif	/* _ASM_C6X_DMA_MAPPING_H */

arch/cris/include/asm/dma-mapping.h

@@ -158,5 +158,15 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 }
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 
 #endif