Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - a cleanup series to get rid of mindlessly copied code. - another bunch of new pointlessly different interrupt chip drivers. Adding homebrewn irq chips (and timers) to SoCs must provide a value add which is beyond the imagination of mere mortals. - the usual SoC irq controller updates, IOW my second cat herding project" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: gic-v3: Implement CPU PM notifier irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling irqchip: renesas-intc-irqpin: Add minimal runtime PM support irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->dev irqchip: atmel-aic5: Add sama5d4 support irqchip: atmel-aic5: The sama5d3 has 48 IRQs Documentation: bcm7120-l2: Add Broadcom BCM7120-style L2 binding irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller irqchip: renesas-irqc: Add binding docs for new R-Car Gen2 SoCs irqchip: renesas-irqc: Add DT binding documentation irqchip: renesas-intc-irqpin: Document SoC-specific bindings openrisc: Get rid of handle_IRQ arm64: Get rid of handle_IRQ ARM: omap2: irq: Convert to handle_domain_irq ARM: imx: tzic: Convert to handle_domain_irq ARM: imx: avic: Convert to handle_domain_irq irqchip: or1k-pic: Convert to handle_domain_irq irqchip: atmel-aic5: Convert to handle_domain_irq irqchip: atmel-aic: Convert to handle_domain_irq irqchip: gic-v3: Convert to handle_domain_irq ...
josf · Oct 9, 2014 · 782d59c · 782d59c
2 parents 47137c6 + 2828c9c
commit 782d59c
Show file tree

Hide file tree

Showing 45 changed files with 1,356 additions and 203 deletions.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 - compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200" or "sama5d3"
+  <chip> can be "at91rm9200", "sama5d3" or "sama5d4"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
@@ -0,0 +1,86 @@
+Broadcom BCM7120-style Level 2 interrupt controller
+
+This interrupt controller hardware is a second level interrupt controller that
+is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+Such an interrupt controller has the following hardware design:
+
+- outputs multiple interrupts signals towards its interrupt controller parent
+
+- controls how some of the interrupts will be flowing, whether they will
+  directly output an interrupt signal towards the interrupt controller parent,
+  or if they will output an interrupt signal at this 2nd level interrupt
+  controller, in particular for UARTs
+
+- not all 32-bits within the interrupt controller actually map to an interrupt
+
+The typical hardware layout for this controller is represented below:
+
+2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+0 -----[ MUX ] ------------|==========> GIC interrupt 75
+          \-----------\
+                       |
+1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+          \------------|
+                       |
+2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+          \------------|
+                       |
+3 ---------------------|
+4 ---------------------|
+5 ---------------------|
+7 ---------------------|---|===========> GIC interrupt 66
+9 ---------------------|
+10 --------------------|
+11 --------------------/
+
+6 ------------------------\
+                           |===========> GIC interrupt 64
+8 ------------------------/
+
+12 ........................ X
+13 ........................ X 		(not connected)
+..
+31 ........................ X
+
+Required properties:
+
+- compatible: should be "brcm,bcm7120-l2-intc"
+- reg: specifies the base physical address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- interrupt-parent: specifies the phandle to the parent interrupt controller
+  this one is cascaded from
+- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
+  node, valid values depend on the type of parent interrupt controller
+- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
+  are wired to this 2nd level interrupt controller, and how they match their
+  respective interrupt parents. Should match exactly the number of interrupts
+  specified in the 'interrupts' property.
+
+Optional properties:
+
+- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
+  wakeup source for system suspend/resume.
+
+- brcm,int-fwd-mask: if present, a 32-bits bit mask to configure for the
+  interrupts which have a mux gate, typically UARTs. Setting these bits will
+  make their respective interrupts outputs bypass this 2nd level interrupt
+  controller completely, it completely transparent for the interrupt controller
+  parent
+
+Example:
+
+irq0_intc: interrupt-controller@f0406800 {
+	compatible = "brcm,bcm7120-l2-intc";
+	interrupt-parent = <&intc>;
+	#interrupt-cells = <1>;
+	reg = <0xf0406800 0x8>;
+	interrupt-controller;
+	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+	brcm,int-map-mask = <0xeb8>, <0x140>;
+	brcm,int-fwd-mask = <0x7>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
@@ -2,7 +2,13 @@ DT bindings for the R-/SH-Mobile irqpin controller
 
 Required properties:
 
-- compatible: has to be "renesas,intc-irqpin"
+- compatible: has to be "renesas,intc-irqpin-<soctype>", "renesas,intc-irqpin"
+  as fallback.
+  Examples with soctypes are:
+    - "renesas,intc-irqpin-r8a7740" (R-Mobile A1)
+    - "renesas,intc-irqpin-r8a7778" (R-Car M1A)
+    - "renesas,intc-irqpin-r8a7779" (R-Car H1)
+    - "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
   interrupts.txt in this directory
 

diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
@@ -0,0 +1,32 @@
+DT bindings for the R-Mobile/R-Car interrupt controller
+
+Required properties:
+
+- compatible: has to be "renesas,irqc-<soctype>", "renesas,irqc" as fallback.
+  Examples with soctypes are:
+    - "renesas,irqc-r8a73a4" (R-Mobile AP6)
+    - "renesas,irqc-r8a7790" (R-Car H2)
+    - "renesas,irqc-r8a7791" (R-Car M2-W)
+    - "renesas,irqc-r8a7792" (R-Car V2H)
+    - "renesas,irqc-r8a7793" (R-Car M2-N)
+    - "renesas,irqc-r8a7794" (R-Car E2)
+- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
+  interrupts.txt in this directory
+
+Optional properties:
+
+- any properties, listed in interrupts.txt, and any standard resource allocation
+  properties
+
+Example:
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
@@ -0,0 +1,36 @@
+Keystone 2 IRQ controller IP
+
+On Keystone SOCs, DSP cores can send interrupts to ARM
+host using the IRQ controller IP. It provides 28 IRQ signals to ARM.
+The IRQ handler running on HOST OS can identify DSP signal source by
+analyzing SRCCx bits in IPCARx registers. This is one of the component
+used by the IPC mechanism used on Keystone SOCs.
+
+Required Properties:
+- compatible: should be "ti,keystone-irq"
+- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
+			access device control registers and the offset inside
+			device control registers range.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+					 source should be 1.
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+	kirq0: keystone_irq0@026202a0 {
+		compatible = "ti,keystone-irq";
+		ti,syscon-dev = <&devctrl 0x2a0>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	dsp0: dsp0 {
+		compatible = "linux,rproc-user";
+		...
+		interrupt-parent = <&kirq0>;
+		interrupts = <10 2>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -5045,6 +5045,7 @@ L:	[email protected]
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 T:	git git://git.infradead.org/users/jcooper/linux.git irqchip/core
+F:	Documentation/devicetree/bindings/interrupt-controller/
 F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
@@ -24,6 +24,7 @@ config ARM
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
+	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
@@ -65,24 +65,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
  */
 void handle_IRQ(unsigned int irq, struct pt_regs *regs)
 {
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (unlikely(irq >= nr_irqs)) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Bad IRQ%u\n", irq);
-		ack_bad_irq(irq);
-	} else {
-		generic_handle_irq(irq);
-	}
-
-	irq_exit();
-	set_irq_regs(old_regs);
+	__handle_domain_irq(NULL, irq, false, regs);
 }
 
 /*

diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
@@ -144,7 +144,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
 		if (nivector == 0xffff)
 			break;
 
-		handle_IRQ(irq_find_mapping(domain, nivector), regs);
+		handle_domain_irq(domain, nivector, regs);
 	} while (1);
 }
 

diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
@@ -141,8 +141,7 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
 			while (stat) {
 				handled = 1;
 				irqofs = fls(stat) - 1;
-				handle_IRQ(irq_find_mapping(domain,
-						irqofs + i * 32), regs);
+				handle_domain_irq(domain, irqofs + i * 32, regs);
 				stat &= ~(1 << irqofs);
 			}
 		}

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
@@ -30,6 +30,7 @@ config ARM64
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
+	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL

diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
@@ -47,8 +47,6 @@ static inline void ack_bad_irq(unsigned int irq)
 	irq_err_count++;
 }
 
-extern void handle_IRQ(unsigned int, struct pt_regs *);
-
 /*
  * No arch-specific IRQ flags.
  */

diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
@@ -40,33 +40,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	return 0;
 }
 
-/*
- * handle_IRQ handles all hardware IRQ's.  Decoded IRQs should
- * not come via this function.  Instead, they should provide their
- * own 'handler'.  Used by platform code implementing C-based 1st
- * level decoding.
- */
-void handle_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (unlikely(irq >= nr_irqs)) {
-		pr_warn_ratelimited("Bad IRQ%u\n", irq);
-		ack_bad_irq(irq);
-	} else {
-		generic_handle_irq(irq);
-	}
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
 void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
 {
 	if (handle_arch_irq)

diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
@@ -8,6 +8,7 @@ config OPENRISC
 	select OF
 	select OF_EARLY_FLATTREE
 	select IRQ_DOMAIN
+	select HANDLE_DOMAIN_IRQ
 	select HAVE_MEMBLOCK
 	select ARCH_REQUIRE_GPIOLIB
         select HAVE_ARCH_TRACEHOOK

diff --git a/arch/openrisc/include/asm/irq.h b/arch/openrisc/include/asm/irq.h
@@ -24,7 +24,6 @@
 
 #define NO_IRQ		(-1)
 
-void handle_IRQ(unsigned int, struct pt_regs *);
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 
 #endif /* __ASM_OPENRISC_IRQ_H__ */
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c
@@ -48,18 +48,6 @@ void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
 	handle_arch_irq = handle_irq;
 }
 
-void handle_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	generic_handle_irq(irq);
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	handle_arch_irq(regs);

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
@@ -118,3 +118,10 @@ config IRQ_CROSSBAR
 	  The primary irqchip invokes the crossbar's callback which inturn allocates
 	  a free irq and configures the IP. Thus the peripheral interrupts are
 	  routed to one of the free irqchip interrupt lines.
+
+config KEYSTONE_IRQ
+	tristate "Keystone 2 IRQ controller IP"
+	depends on ARCH_KEYSTONE
+	help
+		Support for Texas Instruments Keystone 2 IRQ controller IP which
+		is part of the Keystone 2 IPC mechanism
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP)			+= irqchip.o
 
 obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
+obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
 obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
@@ -34,4 +35,6 @@ obj-$(CONFIG_TB10X_IRQC)		+= irq-tb10x.o
 obj-$(CONFIG_XTENSA)			+= irq-xtensa-pic.o
 obj-$(CONFIG_XTENSA_MX)			+= irq-xtensa-mx.o
 obj-$(CONFIG_IRQ_CROSSBAR)		+= irq-crossbar.o
-obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o
+obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o \
+					   irq-bcm7120-l2.o
+obj-$(CONFIG_KEYSTONE_IRQ)		+= irq-keystone.o
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
@@ -393,13 +393,15 @@ static void armada_370_xp_handle_msi_irq(struct pt_regs *regs, bool is_chained)
 		if (!(msimask & BIT(msinr)))
 			continue;
 
-		irq = irq_find_mapping(armada_370_xp_msi_domain,
-				       msinr - 16);
-
-		if (is_chained)
+		if (is_chained) {
+			irq = irq_find_mapping(armada_370_xp_msi_domain,
+					       msinr - 16);
 			generic_handle_irq(irq);
-		else
-			handle_IRQ(irq, regs);
+		} else {
+			irq = msinr - 16;
+			handle_domain_irq(armada_370_xp_msi_domain,
+					  irq, regs);
+		}
 	}
 }
 #else
@@ -444,9 +446,8 @@ armada_370_xp_handle_irq(struct pt_regs *regs)
 			break;
 
 		if (irqnr > 1) {
-			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
-					irqnr);
-			handle_IRQ(irqnr, regs);
+			handle_domain_irq(armada_370_xp_mpic_domain,
+					  irqnr, regs);
 			continue;
 		}
-Original file line number
+Diff line change
@@ Expand Up / @@ -47,8 +47,6 @@ static inline void ack_bad_irq(unsigned int irq) @@
     	irq_err_count++;
     }
-    extern void handle_IRQ(unsigned int, struct pt_regs *);
     /*
      * No arch-specific IRQ flags.
      */
@@ Expand Down @@