Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Here are the main updates for SoC support (besides DT additions) for
  ARM 32- and 64-bit platforms. The branch also contains defconfig
  updates to turn on drivers and options as needed on the various
  platforms.

  The largest parts of the delta are from cleanups moving platform data
  and board file setup of TI platforms to ti-sysc bus drivers. There are
  also some sweeping changes of eeprom and nand setup on Davinci, i.MX
  and other platforms.

  Samsung is removing support for Exynos5440, which was an oddball SoC
  that hasn't been seen much use in designs.

  Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).

  Linus Walleij is also removing support for ux500 (Sony Ericsson)
  U8540/9540 SoCs that never made it to significant mass production and
  products"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  MAINTAINERS: add NXP linux team maillist as i.MX reviewer
  ARM: stm32: Don't select DMA unconditionally on STM32MP157C
  arm64: defconfig: Enable PCIe on msm8996 and db820c
  ARM: pxa3xx: enable external wakeup pins
  ARM: pxa: stargate2: use device properties for at24 eeprom
  arm64: defconfig: Enable HISILICON_LPC
  arm64: defconfig: enable drivers for Poplar support
  arm64: defconfig: Enable UFS on msm8996
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
  bus: ti-sysc: Fix optional clocks array access
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ...

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -21,6 +21,8 @@ SoCs:
     compatible = "renesas,r8a7744"
   - RZ/G1E (R8A77450)
     compatible = "renesas,r8a7745"
+  - RZ/G1C (R8A77470)
+    compatible = "renesas,r8a77470"
   - R-Car M1A (R8A77781)
     compatible = "renesas,r8a7778"
   - R-Car H1 (R8A77790)

Documentation/devicetree/bindings/bus/ti-sysc.txt

@@ -79,7 +79,11 @@ Optional properties:
 		mode as for example omap4 L4_CFG_CLKCTRL
 
 - clock-names	should contain at least "fck", and optionally also "ick"
-		depending on the SoC and the interconnect target module
+		depending on the SoC and the interconnect target module,
+		some interconnect target modules also need additional
+		optional clocks that can be specified as listed in TRM
+		for the related CLKCTRL register bits 8 to 15 such as
+		"dbclk" or "clk32k" depending on their role
 
 - ti,hwmods	optional TI interconnect module name to use legacy
 		hwmod platform data

Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt

@@ -9,6 +9,7 @@ Required properties:
   - compatible: Must contain exactly one of the following:
       - "renesas,r8a7743-sysc" (RZ/G1M)
       - "renesas,r8a7745-sysc" (RZ/G1E)
+      - "renesas,r8a77470-sysc" (RZ/G1C)
       - "renesas,r8a7779-sysc" (R-Car H1)
       - "renesas,r8a7790-sysc" (R-Car H2)
       - "renesas,r8a7791-sysc" (R-Car M2-W)
@@ -20,6 +21,7 @@ Required properties:
       - "renesas,r8a77965-sysc" (R-Car M3-N)
       - "renesas,r8a77970-sysc" (R-Car V3M)
       - "renesas,r8a77980-sysc" (R-Car V3H)
+      - "renesas,r8a77990-sysc" (R-Car E3)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.

Documentation/devicetree/bindings/reset/renesas,rst.txt

@@ -17,6 +17,7 @@ Required properties:
 		Examples with soctypes are:
 		  - "renesas,r8a7743-rst" (RZ/G1M)
 		  - "renesas,r8a7745-rst" (RZ/G1E)
+		  - "renesas,r8a77470-rst" (RZ/G1C)
 		  - "renesas,r8a7778-reset-wdt" (R-Car M1A)
 		  - "renesas,r8a7779-reset-wdt" (R-Car H1)
 		  - "renesas,r8a7790-rst" (R-Car H2)
@@ -29,6 +30,7 @@ Required properties:
 		  - "renesas,r8a77965-rst" (R-Car M3-N)
 		  - "renesas,r8a77970-rst" (R-Car V3M)
 		  - "renesas,r8a77980-rst" (R-Car V3H)
+		  - "renesas,r8a77990-rst" (R-Car E3)
 		  - "renesas,r8a77995-rst" (R-Car D3)
   - reg: Address start and address range for the device.
 

MAINTAINERS

@@ -1419,6 +1419,7 @@ M:	Shawn Guo <[email protected]>
 M:	Sascha Hauer <[email protected]>
 R:	Pengutronix Kernel Team <[email protected]>
 R:	Fabio Estevam <[email protected]>
+R:	NXP Linux Team <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

arch/arm/Kconfig

@@ -1463,7 +1463,7 @@ config ARM_PSCI
 config ARCH_NR_GPIO
 	int
 	default 2048 if ARCH_SOCFPGA
-	default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
+	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
 		ARCH_ZYNQ
 	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
 		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210

arch/arm/Kconfig.debug

@@ -942,6 +942,13 @@ choice
 		  via SCIF0 on Renesas RZ/G1M (R8A7743), R-Car H2 (R8A7790),
 		  M2-W (R8A7791), V2H (R8A7792), or M2-N (R8A7793).
 
+	config DEBUG_RCAR_GEN2_SCIF1
+		bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
+		depends on ARCH_R8A77470
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF1 on Renesas RZ/G1C (R8A77470).
+
 	config DEBUG_RCAR_GEN2_SCIF2
 		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
 		depends on ARCH_R8A7794
@@ -1495,6 +1502,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
@@ -1617,6 +1625,7 @@ config DEBUG_UART_PHYS
 	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
 	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
+	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
 	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
 	default 0xe8008000 if DEBUG_R7S72100_SCIF2
 	default 0xf0000be0 if ARCH_EBSA110
@@ -1651,8 +1660,8 @@ config DEBUG_UART_PHYS
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
-		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
-		DEBUG_RCAR_GEN2_SCIF4 || \
+		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
+		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \

arch/arm/Makefile

@@ -212,7 +212,7 @@ machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
 machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti

arch/arm/common/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
+obj-$(CONFIG_SMP)		+= secure_cntvoff.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg

arch/arm/common/secure_cntvoff.S

@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * Initialization of CNTVOFF register from secure mode
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(secure_cntvoff_init)
+	.arch	armv7-a
+	/*
+	 * CNTVOFF has to be initialized either from non-secure Hypervisor
+	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
+	 * then it should be handled by the secure code. The CPU must implement
+	 * the virtualization extensions.
+	 */
+	cps	#MON_MODE
+	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
+	orr	r0, r1, #1
+	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
+	isb
+	mov	r0, #0
+	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
+	isb
+	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
+	isb
+	cps	#SVC_MODE
+	ret	lr
+ENDPROC(secure_cntvoff_init)

arch/arm/configs/bcm2835_defconfig

@@ -64,6 +64,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
+CONFIG_USB_LAN78XX=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_BRCMFMAC=m
@@ -127,6 +128,7 @@ CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=y
 CONFIG_STAGING=y
+CONFIG_BCM2835_VCHIQ=m
 CONFIG_MAILBOX=y
 CONFIG_BCM2835_MBOX=y
 # CONFIG_IOMMU_SUPPORT is not set

arch/arm/configs/davinci_all_defconfig

@@ -56,7 +56,7 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_NETFILTER=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 CONFIG_DMA_CMA=y
 CONFIG_DA8XX_MSTPRI=y
 CONFIG_MTD=m
@@ -212,6 +212,8 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_OMAP=m
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
+CONFIG_REMOTEPROC=m
+CONFIG_DA8XX_REMOTEPROC=m
 CONFIG_MEMORY=y
 CONFIG_TI_AEMIF=m
 CONFIG_DA8XX_DDRCTL=y

arch/arm/configs/exynos_defconfig

@@ -208,6 +208,7 @@ CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
 CONFIG_DRM_NXP_PTN3460=y
 CONFIG_DRM_PARADE_PS8622=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -38,6 +38,7 @@ CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SLL=y
 CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_IMX6UL=y
 CONFIG_SOC_IMX7D=y
@@ -153,6 +154,9 @@ CONFIG_USB_RTL8152=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_CDC_EEM=m
 CONFIG_BRCMFMAC=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
 CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
@@ -199,6 +203,7 @@ CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_STMPE=y
@@ -214,11 +219,13 @@ CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_DA9062_WATCHDOG=y
+CONFIG_RN5T618_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_DA9052_I2C=y
 CONFIG_MFD_DA9062=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -229,6 +236,7 @@ CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
+CONFIG_REGULATOR_RN5T618=y
 CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
@@ -374,6 +382,7 @@ CONFIG_PWM=y
 CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
 CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_NVMEM_VF610_OCOTP=y
 CONFIG_TEE=y
 CONFIG_OPTEE=y
 CONFIG_MUX_MMIO=y

arch/arm/configs/multi_v7_defconfig

@@ -90,6 +90,7 @@ CONFIG_ARCH_R8A73A4=y
 CONFIG_ARCH_R8A7740=y
 CONFIG_ARCH_R8A7743=y
 CONFIG_ARCH_R8A7745=y
+CONFIG_ARCH_R8A77470=y
 CONFIG_ARCH_R8A7778=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_ARCH_R8A7790=y
@@ -187,6 +188,8 @@ CONFIG_B53_MMAP_DRIVER=m
 CONFIG_B53_SRAB_DRIVER=m
 CONFIG_CAN_SUN4I=y
 CONFIG_BT=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 CONFIG_CFG80211=m
@@ -280,6 +283,7 @@ CONFIG_FIXED_PHY=y
 CONFIG_ROCKCHIP_PHY=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8152=m
+CONFIG_USB_LAN78XX=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -360,10 +364,12 @@ CONFIG_SERIAL_ST_ASC=y
 CONFIG_SERIAL_ST_ASC_CONSOLE=y
 CONFIG_SERIAL_STM32=y
 CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HVC_DRIVER=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
+CONFIG_I2C_MESON=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=m
 CONFIG_I2C_MUX_PCA954x=y
@@ -385,6 +391,7 @@ CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SH_MOBILE=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_ST=y
+CONFIG_I2C_STM32F7=y
 CONFIG_I2C_SUN6I_P2WI=y
 CONFIG_I2C_TEGRA=y
 CONFIG_I2C_UNIPHIER=y
@@ -497,6 +504,7 @@ CONFIG_TEGRA_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
+CONFIG_RENESAS_WDT=m
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM47XX_WDT=y
 CONFIG_BCM7038_WDT=m
@@ -638,6 +646,7 @@ CONFIG_DRM_SUN4I=m
 CONFIG_DRM_FSL_DCU=m
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
+CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_SII9234=m
@@ -650,7 +659,6 @@ CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SIMPLE=y
-CONFIG_FB_SH_MOBILE_MERAM=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=m
@@ -947,6 +955,7 @@ CONFIG_PWM_ATMEL=m
 CONFIG_PWM_ATMEL_HLCDC_PWM=m
 CONFIG_PWM_ATMEL_TCB=m
 CONFIG_PWM_FSL_FTM=m
+CONFIG_PWM_MESON=m
 CONFIG_PWM_RCAR=m
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PWM_ROCKCHIP=m
@@ -972,6 +981,7 @@ CONFIG_PHY_QCOM_APQ8064_SATA=m
 CONFIG_PHY_MIPHY28LP=y
 CONFIG_PHY_RCAR_GEN2=m
 CONFIG_PHY_STIH407_USB=y
+CONFIG_PHY_STM32_USBPHYC=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_SAMSUNG_USB2=m

arch/arm/configs/shmobile_defconfig

@@ -14,6 +14,7 @@ CONFIG_ARCH_R8A73A4=y
 CONFIG_ARCH_R8A7740=y
 CONFIG_ARCH_R8A7743=y
 CONFIG_ARCH_R8A7745=y
+CONFIG_ARCH_R8A77470=y
 CONFIG_ARCH_R8A7778=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_ARCH_R8A7790=y
@@ -127,6 +128,7 @@ CONFIG_CPU_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=y
+CONFIG_RENESAS_WDT=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_DA9063=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -156,7 +158,6 @@ CONFIG_DRM_DUMB_VGA_DAC=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_MERAM=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y