arm64: dts: ti: k3-am65: Enable PCIe nodes at the board level

PCIe nodes defined in the top-level AM65x SoC dtsi files are incomplete and will not be functional unless they are extended with a SerDes PHY. And usually only one of the two modes can be used at a time as they share a SerDes link. As the PHY and mode is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the PCIe nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Tested-by: Jan Kiszka <[email protected]> Reviewed-by: Bryan Brattlof <[email protected]> Link: https://lore.kernel.org/r/[email protected]
josf · Nov 4, 2022 · 7ff8432 · 7ff8432
1 parent b08bf4a
commit 7ff8432
Show file tree

Hide file tree

Showing 3 changed files with 5 additions and 28 deletions.
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -632,15 +632,8 @@
 	};
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
 &pcie1_rc {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&minipcie_pins_default>;
 
@@ -650,10 +643,6 @@
 	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	status = "disabled";
-};
-
 &mailbox0_cluster0 {
 	interrupts = <436>;
 

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -720,6 +720,7 @@
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		device_type = "pci";
+		status = "disabled";
 	};
 
 	pcie0_ep: pcie-ep@5500000 {
@@ -733,6 +734,7 @@
 		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
 	};
 
 	pcie1_rc: pcie@5600000 {
@@ -753,6 +755,7 @@
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
 		device_type = "pci";
+		status = "disabled";
 	};
 
 	pcie1_ep: pcie-ep@5600000 {
@@ -766,6 +769,7 @@
 		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
 	};
 
 	mcasp0: mcasp@2b00000 {

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -415,22 +415,6 @@
 	status = "disabled";
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
-&pcie1_rc {
-	status = "disabled";
-};
-
-&pcie1_ep {
-	status = "disabled";
-};
-
 &mailbox0_cluster0 {
 	interrupts = <436>;