ipack/devices/ipoctal: rework disable TX when the TX buffer is empty

Depending of the device, it disables the TX mode in different places when there is no more data to transmit. This patch reorder them and disable the TX mode in the same place. Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
josf · Jan 16, 2013 · 9d01b6f · 9d01b6f
1 parent b5071f2
commit 9d01b6f
Showing 1 changed file with 7 additions and 11 deletions.
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
@@ -177,10 +177,6 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
 	(*pointer_write)++;
 	*pointer_write = *pointer_write % PAGE_SIZE;
 	channel->nb_bytes--;
-
-	if (channel->nb_bytes == 0 &&
-	    channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485)
-		iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
 }
 
 static void ipoctal_irq_channel(struct ipoctal_channel *channel)
@@ -196,14 +192,14 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel)
 	isr = ioread8(&channel->block_regs->r.isr);
 	sr = ioread8(&channel->regs->r.sr);
 
-	/* In case of RS-485, change from TX to RX when finishing TX.
-	 * Half-duplex. */
-	if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
-	    (sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
-		iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
-		iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
-		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+	if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
 		iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
+		/* In case of RS-485, change from TX to RX when finishing TX.
+		 * Half-duplex. */
+		if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+			iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
+			iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+		}
 	}
 
 	/* RX data */