Merge v5.15-rc5 into char-misc-next

We need the fixes in here as well, and also resolve some merge conflicts
in:
	drivers/misc/eeprom/at25.c

Signed-off-by: Greg Kroah-Hartman <[email protected]>

.mailmap

@@ -126,6 +126,8 @@ Greg Kroah-Hartman <[email protected]>
 Greg Kroah-Hartman <[email protected]>
 Greg Kurz <[email protected]> <[email protected]>
 Gregory CLEMENT <[email protected]> <[email protected]>
+Guo Ren <[email protected]> <[email protected]>
+Guo Ren <[email protected]> <[email protected]>
 Gustavo Padovan <[email protected]>
 Gustavo Padovan <[email protected]>
 Hanjun Guo <[email protected]> <[email protected]>

Documentation/admin-guide/blockdev/drbd/figures.rst

@@ -25,6 +25,6 @@ Sub graphs of DRBD's state transitions
     :alt:   disk-states-8.dot
     :align: center
 
-.. kernel-figure:: node-states-8.dot
-    :alt:   node-states-8.dot
+.. kernel-figure:: peer-states-8.dot
+    :alt:   peer-states-8.dot
     :align: center

Documentation/admin-guide/blockdev/drbd/node-states-8.dot → Documentation/admin-guide/blockdev/drbd/peer-states-8.dot

@@ -1,8 +1,3 @@
-digraph node_states {
-	Secondary -> Primary           [ label = "ioctl_set_state()" ]
-	Primary   -> Secondary 	       [ label = "ioctl_set_state()" ]
-}
-
 digraph peer_states {
 	Secondary -> Primary           [ label = "recv state packet" ]
 	Primary   -> Secondary 	       [ label = "recv state packet" ]

Documentation/arm64/pointer-authentication.rst

@@ -53,11 +53,10 @@ The number of bits that the PAC occupies in a pointer is 55 minus the
 virtual address size configured by the kernel. For example, with a
 virtual address size of 48, the PAC is 7 bits wide.
 
-Recent versions of GCC can compile code with APIAKey-based return
-address protection when passed the -msign-return-address option. This
-uses instructions in the HINT space (unless -march=armv8.3-a or higher
-is also passed), and such code can run on systems without the pointer
-authentication extension.
+When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled
+with HINT space pointer authentication instructions protecting
+function returns. Kernels built with this option will work on hardware
+with or without pointer authentication support.
 
 In addition to exec(), keys can also be reinitialized to random values
 using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY,

Documentation/conf.py

@@ -249,11 +249,16 @@
 
 html_static_path = ['sphinx-static']
 
-html_context = {
-    'css_files': [
-        '_static/theme_overrides.css',
-    ],
-}
+html_css_files = [
+    'theme_overrides.css',
+]
+
+if major <= 1 and minor < 8:
+    html_context = {
+        'css_files': [
+            '_static/theme_overrides.css',
+        ],
+    }
 
 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied

Documentation/cpu-freq/core.rst

@@ -73,12 +73,12 @@ CPUFREQ_POSTCHANGE.
 The third argument is a struct cpufreq_freqs with the following
 values:
 
-=====	===========================
-cpu	number of the affected CPU
+======	======================================
+policy	a pointer to the struct cpufreq_policy
 old	old frequency
 new	new frequency
 flags	flags of the cpufreq driver
-=====	===========================
+======	======================================
 
 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml

@@ -136,7 +136,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;

Documentation/devicetree/bindings/input/gpio-keys.yaml

@@ -142,7 +142,7 @@ examples:
         down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
-            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
     };
 

Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml

@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:

Documentation/devicetree/bindings/net/ethernet-phy.yaml

@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:

Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml

@@ -29,7 +29,7 @@ properties:
           - PHY_TYPE_PCIE
           - PHY_TYPE_SATA
           - PHY_TYPE_SGMII
-          - PHY_TYPE_USB
+          - PHY_TYPE_USB3
       - description: The PHY instance
         minimum: 0
         maximum: 1 # for DP, SATA or USB

Documentation/devicetree/bindings/power/supply/bq25980.yaml

@@ -105,7 +105,7 @@ examples:
           reg = <0x65>;
           interrupt-parent = <&gpio1>;
           interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-          ti,watchdog-timer = <0>;
+          ti,watchdog-timeout-ms = <0>;
           ti,sc-ocp-limit-microamp = <2000000>;
           ti,sc-ovp-limit-microvolt = <17800000>;
           monitored-battery = <&bat>;

Documentation/devicetree/bindings/sound/wlf,wm8962.yaml

@@ -19,6 +19,9 @@ properties:
   clocks:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   "#sound-dai-cells":
     const: 0
 

Documentation/devicetree/bindings/spi/spi-rockchip.yaml

@@ -33,6 +33,7 @@ properties:
               - rockchip,rk3328-spi
               - rockchip,rk3368-spi
               - rockchip,rk3399-spi
+              - rockchip,rk3568-spi
               - rockchip,rv1126-spi
           - const: rockchip,rk3066-spi
 

Documentation/filesystems/netfs_library.rst

@@ -1,7 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0
 
 =================================
-NETWORK FILESYSTEM HELPER LIBRARY
+Network Filesystem Helper Library
 =================================
 
 .. Contents:
@@ -37,22 +37,22 @@ into a common call framework.
 
 The following services are provided:
 
- * Handles transparent huge pages (THPs).
+ * Handle folios that span multiple pages.
 
- * Insulates the netfs from VM interface changes.
+ * Insulate the netfs from VM interface changes.
 
- * Allows the netfs to arbitrarily split reads up into pieces, even ones that
-   don't match page sizes or page alignments and that may cross pages.
+ * Allow the netfs to arbitrarily split reads up into pieces, even ones that
+   don't match folio sizes or folio alignments and that may cross folios.
 
- * Allows the netfs to expand a readahead request in both directions to meet
-   its needs.
+ * Allow the netfs to expand a readahead request in both directions to meet its
+   needs.
 
- * Allows the netfs to partially fulfil a read, which will then be resubmitted.
+ * Allow the netfs to partially fulfil a read, which will then be resubmitted.
 
- * Handles local caching, allowing cached data and server-read data to be
+ * Handle local caching, allowing cached data and server-read data to be
    interleaved for a single request.
 
- * Handles clearing of bufferage that aren't on the server.
+ * Handle clearing of bufferage that aren't on the server.
 
  * Handle retrying of reads that failed, switching reads from the cache to the
    server as necessary.
@@ -70,22 +70,22 @@ Read Helper Functions
 
 Three read helpers are provided::
 
- * void netfs_readahead(struct readahead_control *ractl,
-			const struct netfs_read_request_ops *ops,
-			void *netfs_priv);``
- * int netfs_readpage(struct file *file,
-		      struct page *page,
-		      const struct netfs_read_request_ops *ops,
-		      void *netfs_priv);
- * int netfs_write_begin(struct file *file,
-			 struct address_space *mapping,
-			 loff_t pos,
-			 unsigned int len,
-			 unsigned int flags,
-			 struct page **_page,
-			 void **_fsdata,
-			 const struct netfs_read_request_ops *ops,
-			 void *netfs_priv);
+	void netfs_readahead(struct readahead_control *ractl,
+			     const struct netfs_read_request_ops *ops,
+			     void *netfs_priv);
+	int netfs_readpage(struct file *file,
+			   struct folio *folio,
+			   const struct netfs_read_request_ops *ops,
+			   void *netfs_priv);
+	int netfs_write_begin(struct file *file,
+			      struct address_space *mapping,
+			      loff_t pos,
+			      unsigned int len,
+			      unsigned int flags,
+			      struct folio **_folio,
+			      void **_fsdata,
+			      const struct netfs_read_request_ops *ops,
+			      void *netfs_priv);
 
 Each corresponds to a VM operation, with the addition of a couple of parameters
 for the use of the read helpers:
@@ -103,8 +103,8 @@ Both of these values will be stored into the read request structure.
 For ->readahead() and ->readpage(), the network filesystem should just jump
 into the corresponding read helper; whereas for ->write_begin(), it may be a
 little more complicated as the network filesystem might want to flush
-conflicting writes or track dirty data and needs to put the acquired page if an
-error occurs after calling the helper.
+conflicting writes or track dirty data and needs to put the acquired folio if
+an error occurs after calling the helper.
 
 The helpers manage the read request, calling back into the network filesystem
 through the suppplied table of operations.  Waits will be performed as
@@ -253,7 +253,7 @@ through which it can issue requests and negotiate::
 		void (*issue_op)(struct netfs_read_subrequest *subreq);
 		bool (*is_still_valid)(struct netfs_read_request *rreq);
 		int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
-					 struct page *page, void **_fsdata);
+					 struct folio *folio, void **_fsdata);
 		void (*done)(struct netfs_read_request *rreq);
 		void (*cleanup)(struct address_space *mapping, void *netfs_priv);
 	};
@@ -313,13 +313,14 @@ The operations are as follows:
 
    There is no return value; the netfs_subreq_terminated() function should be
    called to indicate whether or not the operation succeeded and how much data
-   it transferred.  The filesystem also should not deal with setting pages
+   it transferred.  The filesystem also should not deal with setting folios
    uptodate, unlocking them or dropping their refs - the helpers need to deal
    with this as they have to coordinate with copying to the local cache.
 
-   Note that the helpers have the pages locked, but not pinned.  It is possible
-   to use the ITER_XARRAY iov iterator to refer to the range of the inode that
-   is being operated upon without the need to allocate large bvec tables.
+   Note that the helpers have the folios locked, but not pinned.  It is
+   possible to use the ITER_XARRAY iov iterator to refer to the range of the
+   inode that is being operated upon without the need to allocate large bvec
+   tables.
 
  * ``is_still_valid()``
 
@@ -330,15 +331,15 @@ The operations are as follows:
  * ``check_write_begin()``
 
    [Optional] This is called from the netfs_write_begin() helper once it has
-   allocated/grabbed the page to be modified to allow the filesystem to flush
+   allocated/grabbed the folio to be modified to allow the filesystem to flush
    conflicting state before allowing it to be modified.
 
-   It should return 0 if everything is now fine, -EAGAIN if the page should be
+   It should return 0 if everything is now fine, -EAGAIN if the folio should be
    regrabbed and any other error code to abort the operation.
 
  * ``done``
 
-   [Optional] This is called after the pages in the request have all been
+   [Optional] This is called after the folios in the request have all been
    unlocked (and marked uptodate if applicable).
 
  * ``cleanup``
@@ -390,19 +391,19 @@ The read helpers work by the following general procedure:
      * If NETFS_SREQ_CLEAR_TAIL was set, a short read will be cleared to the
        end of the slice instead of reissuing.
 
- * Once the data is read, the pages that have been fully read/cleared:
+ * Once the data is read, the folios that have been fully read/cleared:
 
    * Will be marked uptodate.
 
    * If a cache is present, will be marked with PG_fscache.
 
    * Unlocked
 
- * Any pages that need writing to the cache will then have DIO writes issued.
+ * Any folios that need writing to the cache will then have DIO writes issued.
 
  * Synchronous operations will wait for reading to be complete.
 
- * Writes to the cache will proceed asynchronously and the pages will have the
+ * Writes to the cache will proceed asynchronously and the folios will have the
    PG_fscache mark removed when that completes.
 
  * The request structures will be cleaned up when everything has completed.
@@ -452,6 +453,9 @@ operation table looks like the following::
 			    netfs_io_terminated_t term_func,
 			    void *term_func_priv);
 
+		int (*prepare_write)(struct netfs_cache_resources *cres,
+				     loff_t *_start, size_t *_len, loff_t i_size);
+
 		int (*write)(struct netfs_cache_resources *cres,
 			     loff_t start_pos,
 			     struct iov_iter *iter,
@@ -509,6 +513,14 @@ The methods defined in the table are:
    indicating whether the termination is definitely happening in the caller's
    context.
 
+ * ``prepare_write()``
+
+   [Required] Called to adjust a write to the cache and check that there is
+   sufficient space in the cache.  The start and length values indicate the
+   size of the write that netfslib is proposing, and this can be adjusted by
+   the cache to respect DIO boundaries.  The file size is passed for
+   information.
+
  * ``write()``
 
    [Required] Called to write to the cache.  The start file offset is given
@@ -525,4 +537,9 @@ not the read request structure as they could be used in other situations where
 there isn't a read request structure as well, such as writing dirty data to the
 cache.
 
+
+API Function Reference
+======================
+
 .. kernel-doc:: include/linux/netfs.h
+.. kernel-doc:: fs/netfs/read_helper.c

Documentation/locking/locktypes.rst

@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {