Merge branch 'systemport-padding-and-TSB-insertion'

Florian Fainelli says:

====================
net: systemport: Fix padding vs. TSB insertion

This patch series fixes how we pad the packets submitted to the SYSTEMPORT
adapter, and how the transmit status block (prepended 8 bytes) fits in the
picture. The first patch is not technically a bug fix, but is required for the
second path to be applied and to greatly simplify the skb length calculation.
====================

Signed-off-by: David S. Miller <[email protected]>

drivers/net/ethernet/broadcom/bcmsysport.c

@@ -1012,29 +1012,28 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 		goto out;
 	}
 
-	/* Insert TSB and checksum infos */
-	if (priv->tsb_en) {
-		skb = bcm_sysport_insert_tsb(skb, dev);
-		if (!skb) {
-			ret = NETDEV_TX_OK;
-			goto out;
-		}
-	}
-
 	/* The Ethernet switch we are interfaced with needs packets to be at
 	 * least 64 bytes (including FCS) otherwise they will be discarded when
 	 * they enter the switch port logic. When Broadcom tags are enabled, we
 	 * need to make sure that packets are at least 68 bytes
 	 * (including FCS and tag) because the length verification is done after
 	 * the Broadcom tag is stripped off the ingress packet.
 	 */
-	if (skb_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
+	if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
 		ret = NETDEV_TX_OK;
 		goto out;
 	}
 
-	skb_len = skb->len < ETH_ZLEN + ENET_BRCM_TAG_LEN ?
-			ETH_ZLEN + ENET_BRCM_TAG_LEN : skb->len;
+	/* Insert TSB and checksum infos */
+	if (priv->tsb_en) {
+		skb = bcm_sysport_insert_tsb(skb, dev);
+		if (!skb) {
+			ret = NETDEV_TX_OK;
+			goto out;
+		}
+	}
+
+	skb_len = skb->len;
 
 	mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
 	if (dma_mapping_error(kdev, mapping)) {