merge by hand (scsi_device.h)

drivers/block/scsi_ioctl.c

@@ -328,11 +328,6 @@ static int sg_io(struct file *file, request_queue_t *q,
 	return 0;
 }
 
-#define FORMAT_UNIT_TIMEOUT		(2 * 60 * 60 * HZ)
-#define START_STOP_TIMEOUT		(60 * HZ)
-#define MOVE_MEDIUM_TIMEOUT		(5 * 60 * HZ)
-#define READ_ELEMENT_STATUS_TIMEOUT	(5 * 60 * HZ)
-#define READ_DEFECT_DATA_TIMEOUT	(60 * HZ )
 #define OMAX_SB_LEN 16          /* For backward compatibility */
 
 static int sg_scsi_ioctl(struct file *file, request_queue_t *q,

drivers/message/i2o/i2o_config.c

@@ -54,6 +54,9 @@
 
 extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
 
+static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
+			 unsigned long arg);
+
 static spinlock_t i2o_config_lock;
 
 #define MODINC(x,y) ((x) = ((x) + 1) % (y))
@@ -538,8 +541,7 @@ static int i2o_cfg_evt_get(unsigned long arg, struct file *fp)
 }
 
 #ifdef CONFIG_COMPAT
-static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg,
-			      struct file *file)
+static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg)
 {
 	struct i2o_cmd_passthru32 __user *cmd;
 	struct i2o_controller *c;
@@ -752,7 +754,26 @@ static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg,
 	return rcode;
 }
 
-#else
+static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+	int ret;
+	lock_kernel();		
+	switch (cmd) { 
+	case I2OGETIOPS:
+		ret = i2o_cfg_ioctl(NULL, file, cmd, arg);
+		break;
+	case I2OPASSTHRU32:
+		ret = i2o_cfg_passthru32(file, cmd, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	unlock_kernel();
+	return ret;
+}
+
+#endif
 
 static int i2o_cfg_passthru(unsigned long arg)
 {
@@ -958,7 +979,6 @@ static int i2o_cfg_passthru(unsigned long arg)
 	kfree(reply);
 	return rcode;
 }
-#endif
 
 /*
  * IOCTL Handler
@@ -1013,11 +1033,9 @@ static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
 		ret = i2o_cfg_evt_get(arg, fp);
 		break;
 
-#ifndef CONFIG_COMPAT
 	case I2OPASSTHRU:
 		ret = i2o_cfg_passthru(arg);
 		break;
-#endif
 
 	default:
 		osm_debug("unknown ioctl called!\n");
@@ -1105,6 +1123,9 @@ static struct file_operations config_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.ioctl = i2o_cfg_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = i2o_cfg_compat_ioctl,
+#endif
 	.open = cfg_open,
 	.release = cfg_release,
 	.fasync = cfg_fasync,
@@ -1134,19 +1155,11 @@ static int __init i2o_config_init(void)
 		misc_deregister(&i2o_miscdev);
 		return -EBUSY;
 	}
-#ifdef CONFIG_COMPAT
-	register_ioctl32_conversion(I2OPASSTHRU32, i2o_cfg_passthru32);
-	register_ioctl32_conversion(I2OGETIOPS, (void *)sys_ioctl);
-#endif
 	return 0;
 }
 
 static void i2o_config_exit(void)
 {
-#ifdef CONFIG_COMPAT
-	unregister_ioctl32_conversion(I2OPASSTHRU32);
-	unregister_ioctl32_conversion(I2OGETIOPS);
-#endif
 	misc_deregister(&i2o_miscdev);
 	i2o_driver_unregister(&i2o_config_driver);
 }

drivers/s390/scsi/zfcp_aux.c

@@ -88,10 +88,10 @@ MODULE_DESCRIPTION
     ("FCP (SCSI over Fibre Channel) HBA driver for IBM eServer zSeries");
 MODULE_LICENSE("GPL");
 
-module_param(device, charp, 0);
+module_param(device, charp, 0400);
 MODULE_PARM_DESC(device, "specify initial device");
 
-module_param(loglevel, uint, 0);
+module_param(loglevel, uint, 0400);
 MODULE_PARM_DESC(loglevel,
 		 "log levels, 8 nibbles: "
 		 "FC ERP QDIO CIO Config FSF SCSI Other, "

drivers/s390/scsi/zfcp_def.h

@@ -70,7 +70,7 @@
 /********************* GENERAL DEFINES *********************************/
 
 /* zfcp version number, it consists of major, minor, and patch-level number */
-#define ZFCP_VERSION		"4.2.0"
+#define ZFCP_VERSION		"4.3.0"
 
 /**
  * zfcp_sg_to_address - determine kernel address from struct scatterlist
@@ -851,6 +851,9 @@ struct zfcp_adapter {
 	wwn_t			wwnn;	           /* WWNN */
 	wwn_t			wwpn;	           /* WWPN */
 	fc_id_t			s_id;	           /* N_Port ID */
+	wwn_t			peer_wwnn;	   /* P2P peer WWNN */
+	wwn_t			peer_wwpn;	   /* P2P peer WWPN */
+	fc_id_t			peer_d_id;	   /* P2P peer D_ID */
 	struct ccw_device       *ccw_device;	   /* S/390 ccw device */
 	u8			fc_service_class;
 	u32			fc_topology;	   /* FC topology */

drivers/s390/scsi/zfcp_erp.c

@@ -2568,6 +2568,23 @@ zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *erp_action)
 	case ZFCP_ERP_STEP_UNINITIALIZED:
 	case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
 	case ZFCP_ERP_STEP_PORT_CLOSING:
+		if (adapter->fc_topology == FSF_TOPO_P2P) {
+			if (port->wwpn != adapter->peer_wwpn) {
+				ZFCP_LOG_NORMAL("Failed to open port 0x%016Lx "
+						"on adapter %s.\nPeer WWPN "
+						"0x%016Lx does not match\n",
+						port->wwpn,
+						zfcp_get_busid_by_adapter(adapter),
+						adapter->peer_wwpn);
+				zfcp_erp_port_failed(port);
+				retval = ZFCP_ERP_FAILED;
+				break;
+			}
+			port->d_id = adapter->peer_d_id;
+			atomic_set_mask(ZFCP_STATUS_PORT_DID_DID, &port->status);
+			retval = zfcp_erp_port_strategy_open_port(erp_action);
+			break;
+		}
 		if (!(adapter->nameserver_port)) {
 			retval = zfcp_nameserver_enqueue(adapter);
 			if (retval != 0) {
@@ -3516,8 +3533,9 @@ zfcp_erp_adapter_access_changed(struct zfcp_adapter *adapter)
 	debug_text_event(adapter->erp_dbf, 3, "a_access_unblock");
 	debug_event(adapter->erp_dbf, 3, &adapter->name, 8);
 
-	zfcp_erp_port_access_changed(adapter->nameserver_port);
 	read_lock_irqsave(&zfcp_data.config_lock, flags);
+	if (adapter->nameserver_port)
+		zfcp_erp_port_access_changed(adapter->nameserver_port);
 	list_for_each_entry(port, &adapter->port_list_head, list)
 		if (port != adapter->nameserver_port)
 			zfcp_erp_port_access_changed(port);

drivers/s390/scsi/zfcp_fsf.c

@@ -2107,6 +2107,9 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 		       bottom->low_qtcb_version, bottom->high_qtcb_version);
 	adapter->fsf_lic_version = bottom->lic_version;
 	adapter->supported_features = bottom->supported_features;
+	adapter->peer_wwpn = 0;
+	adapter->peer_wwnn = 0;
+	adapter->peer_d_id = 0;
 
 	if (xchg_ok) {
 		adapter->wwnn = bottom->nport_serv_param.wwnn;
@@ -2124,13 +2127,19 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 		adapter->hydra_version = 0;
 	}
 
+	if (adapter->fc_topology == FSF_TOPO_P2P) {
+		adapter->peer_d_id = bottom->peer_d_id & ZFCP_DID_MASK;
+		adapter->peer_wwpn = bottom->plogi_payload.wwpn;
+		adapter->peer_wwnn = bottom->plogi_payload.wwnn;
+	}
+
 	if(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT){
 		adapter->hardware_version = bottom->hardware_version;
 		memcpy(adapter->serial_number, bottom->serial_number, 17);
 		EBCASC(adapter->serial_number, sizeof(adapter->serial_number));
 	}
 
-	ZFCP_LOG_INFO("The adapter %s reported the following characteristics:\n"
+	ZFCP_LOG_NORMAL("The adapter %s reported the following characteristics:\n"
 		      "WWNN 0x%016Lx, "
 		      "WWPN 0x%016Lx, "
 		      "S_ID 0x%08x,\n"
@@ -2194,14 +2203,18 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 		switch (adapter->fc_topology) {
 		case FSF_TOPO_P2P:
 			ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n");
-			ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel "
-					"configuration detected at adapter %s "
-					"unsupported, shutting down adapter\n",
-					zfcp_get_busid_by_adapter(adapter));
+			ZFCP_LOG_NORMAL("Point-to-Point fibrechannel "
+					"configuration detected at adapter %s\n"
+					"Peer WWNN 0x%016llx, "
+					"peer WWPN 0x%016llx, "
+					"peer d_id 0x%06x\n",
+					zfcp_get_busid_by_adapter(adapter),
+					adapter->peer_wwnn,
+					adapter->peer_wwpn,
+					adapter->peer_d_id);
 			debug_text_event(fsf_req->adapter->erp_dbf, 0,
 					 "top-p-to-p");
-			zfcp_erp_adapter_shutdown(adapter, 0);
-			return -EIO;
+			break;
 		case FSF_TOPO_AL:
 			ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n");
 			ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel "
@@ -2226,6 +2239,7 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 					"of a type known to the zfcp "
 					"driver, shutting down adapter\n",
 					zfcp_get_busid_by_adapter(adapter));
+			adapter->fc_topology = FSF_TOPO_ERROR;
 			debug_text_exception(fsf_req->adapter->erp_dbf, 0,
 					     "unknown-topo");
 			zfcp_erp_adapter_shutdown(adapter, 0);
@@ -4281,6 +4295,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
 				      bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE);
 			zfcp_cmd_dbf_event_fsf("undeffcp", fsf_req, NULL, 0);
 			set_host_byte(&scpnt->result, DID_ERROR);
+			goto skip_fsfstatus;
 		}
 	}
 
@@ -4334,7 +4349,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
 
 		scpnt->resid = fcp_rsp_iu->fcp_resid;
 		if (scpnt->request_bufflen - scpnt->resid < scpnt->underflow)
-			scpnt->result |= DID_ERROR << 16;
+			set_host_byte(&scpnt->result, DID_ERROR);
 	}
 
  skip_fsfstatus:
@@ -4607,6 +4622,13 @@ zfcp_fsf_control_file_handler(struct zfcp_fsf_req *fsf_req)
 		if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) {
 			switch (header->fsf_status_qual.word[0]) {
 
+			case FSF_SQ_CFDC_HARDENED_ON_SE:
+				ZFCP_LOG_NORMAL(
+					"CFDC on the adapter %s has being "
+					"hardened on primary and secondary SE\n",
+					zfcp_get_busid_by_adapter(adapter));
+				break;
+
 			case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE:
 				ZFCP_LOG_NORMAL(
 					"CFDC of the adapter %s could not "

drivers/s390/scsi/zfcp_fsf.h

@@ -129,6 +129,7 @@
 #define FSF_SQ_NO_RETRY_POSSIBLE		0x07
 
 /* FSF status qualifier for CFDC commands */
+#define FSF_SQ_CFDC_HARDENED_ON_SE		0x00000000
 #define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE	0x00000001
 #define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2	0x00000002
 /* CFDC subtable codes */
@@ -357,7 +358,6 @@ struct fsf_nport_serv_param {
 	u8  class3_serv_param[16];
 	u8  class4_serv_param[16];
 	u8  vendor_version_level[16];
-	u8  res1[16];
 } __attribute__ ((packed));
 
 struct fsf_plogi {
@@ -415,11 +415,13 @@ struct fsf_qtcb_bottom_config {
 	u8 res2[12];
 	u32 s_id;
 	struct fsf_nport_serv_param nport_serv_param;
+	u8 reserved_nport_serv_param[16];
 	u8 res3[8];
 	u32 adapter_ports;
 	u32 hardware_version;
 	u8 serial_number[32];
-	u8 res4[272];
+	struct fsf_nport_serv_param plogi_payload;
+	u8 res4[160];
 } __attribute__ ((packed));
 
 struct fsf_qtcb_bottom_port {

drivers/s390/scsi/zfcp_sysfs_adapter.c

@@ -65,6 +65,9 @@ ZFCP_DEFINE_ADAPTER_ATTR(status, "0x%08x\n", atomic_read(&adapter->status));
 ZFCP_DEFINE_ADAPTER_ATTR(wwnn, "0x%016llx\n", adapter->wwnn);
 ZFCP_DEFINE_ADAPTER_ATTR(wwpn, "0x%016llx\n", adapter->wwpn);
 ZFCP_DEFINE_ADAPTER_ATTR(s_id, "0x%06x\n", adapter->s_id);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_wwnn, "0x%016llx\n", adapter->peer_wwnn);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_wwpn, "0x%016llx\n", adapter->peer_wwpn);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_d_id, "0x%06x\n", adapter->peer_d_id);
 ZFCP_DEFINE_ADAPTER_ATTR(card_version, "0x%04x\n", adapter->hydra_version);
 ZFCP_DEFINE_ADAPTER_ATTR(lic_version, "0x%08x\n", adapter->fsf_lic_version);
 ZFCP_DEFINE_ADAPTER_ATTR(fc_link_speed, "%d Gb/s\n", adapter->fc_link_speed);
@@ -255,6 +258,9 @@ static struct attribute *zfcp_adapter_attrs[] = {
 	&dev_attr_wwnn.attr,
 	&dev_attr_wwpn.attr,
 	&dev_attr_s_id.attr,
+	&dev_attr_peer_wwnn.attr,
+	&dev_attr_peer_wwpn.attr,
+	&dev_attr_peer_d_id.attr,
 	&dev_attr_card_version.attr,
 	&dev_attr_lic_version.attr,
 	&dev_attr_fc_link_speed.attr,