net: stmmac: make "snps,reset-delays-us" optional again

Commit 760f1dc ("net: stmmac: add sanity check to
device_property_read_u32_array call") introduced error checking of the
device_property_read_u32_array() call in stmmac_mdio_reset().
This results in the following error when the "snps,reset-delays-us"
property is not defined in devicetree:
  invalid property snps,reset-delays-us

This sanity check made sense until commit 84ce4d0 ("net: stmmac:
initialize the reset delay array") ensured that there are fallback
values for the reset delay if the "snps,reset-delays-us" property is
absent. That was at the cost of making that property mandatory though.

Drop the sanity check for device_property_read_u32_array() and thus make
the "snps,reset-delays-us" property optional again (avoiding the error
message while loading the stmmac driver with a .dtb where the property
is absent).

Fixes: 760f1dc ("net: stmmac: add sanity check to device_property_read_u32_array call")
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c

@@ -242,23 +242,16 @@ int stmmac_mdio_reset(struct mii_bus *bus)
 	if (priv->device->of_node) {
 		struct gpio_desc *reset_gpio;
 		u32 delays[3] = { 0, 0, 0 };
-		int ret;
 
 		reset_gpio = devm_gpiod_get_optional(priv->device,
 						     "snps,reset",
 						     GPIOD_OUT_LOW);
 		if (IS_ERR(reset_gpio))
 			return PTR_ERR(reset_gpio);
 
-		ret = device_property_read_u32_array(priv->device,
-						     "snps,reset-delays-us",
-						     delays,
-						     ARRAY_SIZE(delays));
-		if (ret) {
-			dev_err(ndev->dev.parent,
-				"invalid property snps,reset-delays-us\n");
-			return -EINVAL;
-		}
+		device_property_read_u32_array(priv->device,
+					       "snps,reset-delays-us",
+					       delays, ARRAY_SIZE(delays));
 
 		if (delays[0])
 			msleep(DIV_ROUND_UP(delays[0], 1000));