Merge tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "A last set of small fixes for GPIO, this cycle was quite busy.

   - Fix debounce delays on the MAX77620 GPIO expander

   - Use the correct unit for debounce times on the BD70528 GPIO expander

   - Get proper deps for parallel builds of the GPIO tools

   - Add a specific ACPI quirk for the Terra Pad 1061"

* tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist
  tools: gpio: Correctly add make dependencies for gpio_utils
  gpio: bd70528: Use correct unit for debounce times
  gpio: max77620: Fixup debounce delays

drivers/gpio/gpio-bd70528.c

@@ -25,13 +25,13 @@ static int bd70528_set_debounce(struct bd70528_gpio *bdgpio,
 	case 0:
 		val = BD70528_DEBOUNCE_DISABLE;
 		break;
-	case 1 ... 15:
+	case 1 ... 15000:
 		val = BD70528_DEBOUNCE_15MS;
 		break;
-	case 16 ... 30:
+	case 15001 ... 30000:
 		val = BD70528_DEBOUNCE_30MS;
 		break;
-	case 31 ... 50:
+	case 30001 ... 50000:
 		val = BD70528_DEBOUNCE_50MS;
 		break;
 	default:

drivers/gpio/gpio-max77620.c

@@ -192,13 +192,13 @@ static int max77620_gpio_set_debounce(struct max77620_gpio *mgpio,
 	case 0:
 		val = MAX77620_CNFG_GPIO_DBNC_None;
 		break;
-	case 1000 ... 8000:
+	case 1 ... 8000:
 		val = MAX77620_CNFG_GPIO_DBNC_8ms;
 		break;
-	case 9000 ... 16000:
+	case 8001 ... 16000:
 		val = MAX77620_CNFG_GPIO_DBNC_16ms;
 		break;
-	case 17000 ... 32000:
+	case 16001 ... 32000:
 		val = MAX77620_CNFG_GPIO_DBNC_32ms;
 		break;
 	default:

drivers/gpio/gpiolib-acpi.c

@@ -1304,11 +1304,28 @@ late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
 
 static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
 	{
+		/*
+		 * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
+		 * a non existing micro-USB-B connector which puts the HDMI
+		 * DDC pins in GPIO mode, breaking HDMI support.
+		 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
 		}
 	},
+	{
+		/*
+		 * The Terra Pad 1061 has a micro-USB-B id-pin handler, which
+		 * instead of controlling the actual micro-USB-B turns the 5V
+		 * boost for its USB-A connector off. The actual micro-USB-B
+		 * connector is wired for charging only.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
+		}
+	},
 	{} /* Terminating entry */
 };
 

tools/gpio/Build

@@ -1,3 +1,4 @@
+gpio-utils-y += gpio-utils.o
 lsgpio-y += lsgpio.o gpio-utils.o
 gpio-hammer-y += gpio-hammer.o gpio-utils.o
 gpio-event-mon-y += gpio-event-mon.o gpio-utils.o

tools/gpio/Makefile

@@ -35,11 +35,15 @@ $(OUTPUT)include/linux/gpio.h: ../../include/uapi/linux/gpio.h
 
 prepare: $(OUTPUT)include/linux/gpio.h
 
+GPIO_UTILS_IN := $(output)gpio-utils-in.o
+$(GPIO_UTILS_IN): prepare FORCE
+	$(Q)$(MAKE) $(build)=gpio-utils
+
 #
 # lsgpio
 #
 LSGPIO_IN := $(OUTPUT)lsgpio-in.o
-$(LSGPIO_IN): prepare FORCE
+$(LSGPIO_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
 	$(Q)$(MAKE) $(build)=lsgpio
 $(OUTPUT)lsgpio: $(LSGPIO_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
@@ -48,7 +52,7 @@ $(OUTPUT)lsgpio: $(LSGPIO_IN)
 # gpio-hammer
 #
 GPIO_HAMMER_IN := $(OUTPUT)gpio-hammer-in.o
-$(GPIO_HAMMER_IN): prepare FORCE
+$(GPIO_HAMMER_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
 	$(Q)$(MAKE) $(build)=gpio-hammer
 $(OUTPUT)gpio-hammer: $(GPIO_HAMMER_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
@@ -57,7 +61,7 @@ $(OUTPUT)gpio-hammer: $(GPIO_HAMMER_IN)
 # gpio-event-mon
 #
 GPIO_EVENT_MON_IN := $(OUTPUT)gpio-event-mon-in.o
-$(GPIO_EVENT_MON_IN): prepare FORCE
+$(GPIO_EVENT_MON_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
 	$(Q)$(MAKE) $(build)=gpio-event-mon
 $(OUTPUT)gpio-event-mon: $(GPIO_EVENT_MON_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@