Merge tag 'usb-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB fixes for 4.2-rc2.  They revert one
  problem patch, fix some minor things, and add some new quirks for
  "broken" devices.

  All have been in linux-next successfully"

* tag 'usb-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  cdc-acm: prevent infinite loop when parsing CDC headers.
  Revert "usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap"
  usb: chipidea: otg: remove mutex unlock and lock while stop and start role
  uas: Set max_sectors_240 quirk for ASM1053 devices
  uas: Add US_FL_MAX_SECTORS_240 flag
  uas: Allow uas_use_uas_driver to return usb-storage flags

Documentation/kernel-parameters.txt

@@ -3787,6 +3787,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					READ_CAPACITY_16 command);
 				f = NO_REPORT_OPCODES (don't use report opcodes
 					command, uas only);
+				g = MAX_SECTORS_240 (don't transfer more than
+					240 sectors at a time, uas only);
 				h = CAPACITY_HEURISTICS (decrease the
 					reported device capacity by one
 					sector if the number is odd);

drivers/usb/chipidea/otg_fsm.c

@@ -520,7 +520,6 @@ static int ci_otg_start_host(struct otg_fsm *fsm, int on)
 {
 	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
 
-	mutex_unlock(&fsm->lock);
 	if (on) {
 		ci_role_stop(ci);
 		ci_role_start(ci, CI_ROLE_HOST);
@@ -529,20 +528,17 @@ static int ci_otg_start_host(struct otg_fsm *fsm, int on)
 		hw_device_reset(ci);
 		ci_role_start(ci, CI_ROLE_GADGET);
 	}
-	mutex_lock(&fsm->lock);
 	return 0;
 }
 
 static int ci_otg_start_gadget(struct otg_fsm *fsm, int on)
 {
 	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
 
-	mutex_unlock(&fsm->lock);
 	if (on)
 		usb_gadget_vbus_connect(&ci->gadget);
 	else
 		usb_gadget_vbus_disconnect(&ci->gadget);
-	mutex_lock(&fsm->lock);
 
 	return 0;
 }

drivers/usb/class/cdc-acm.c

@@ -1142,11 +1142,16 @@ static int acm_probe(struct usb_interface *intf,
 	}
 
 	while (buflen > 0) {
+		elength = buffer[0];
+		if (!elength) {
+			dev_err(&intf->dev, "skipping garbage byte\n");
+			elength = 1;
+			goto next_desc;
+		}
 		if (buffer[1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
 		}
-		elength = buffer[0];
 
 		switch (buffer[2]) {
 		case USB_CDC_UNION_TYPE: /* we've found it */

drivers/usb/host/ehci-msm.c

@@ -88,13 +88,20 @@ static int ehci_msm_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(hcd->regs)) {
-		ret = PTR_ERR(hcd->regs);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get memory resource\n");
+		ret = -ENODEV;
 		goto put_hcd;
 	}
+
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
+	hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto put_hcd;
+	}
 
 	/*
 	 * OTG driver takes care of PHY initialization, clock management,

drivers/usb/storage/uas-detect.h

@@ -51,7 +51,8 @@ static int uas_find_endpoints(struct usb_host_interface *alt,
 }
 
 static int uas_use_uas_driver(struct usb_interface *intf,
-			      const struct usb_device_id *id)
+			      const struct usb_device_id *id,
+			      unsigned long *flags_ret)
 {
 	struct usb_host_endpoint *eps[4] = { };
 	struct usb_device *udev = interface_to_usbdev(intf);
@@ -73,7 +74,7 @@ static int uas_use_uas_driver(struct usb_interface *intf,
 	 * this writing the following versions exist:
 	 * ASM1051 - no uas support version
 	 * ASM1051 - with broken (*) uas support
-	 * ASM1053 - with working uas support
+	 * ASM1053 - with working uas support, but problems with large xfers
 	 * ASM1153 - with working uas support
 	 *
 	 * Devices with these chips re-use a number of device-ids over the
@@ -103,6 +104,9 @@ static int uas_use_uas_driver(struct usb_interface *intf,
 		} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
 			/* Possibly an ASM1051, disable uas */
 			flags |= US_FL_IGNORE_UAS;
+		} else {
+			/* ASM1053, these have issues with large transfers */
+			flags |= US_FL_MAX_SECTORS_240;
 		}
 	}
 
@@ -132,5 +136,8 @@ static int uas_use_uas_driver(struct usb_interface *intf,
 		return 0;
 	}
 
+	if (flags_ret)
+		*flags_ret = flags;
+
 	return 1;
 }

drivers/usb/storage/uas.c

@@ -759,7 +759,10 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
 
 static int uas_slave_alloc(struct scsi_device *sdev)
 {
-	sdev->hostdata = (void *)sdev->host->hostdata;
+	struct uas_dev_info *devinfo =
+		(struct uas_dev_info *)sdev->host->hostdata;
+
+	sdev->hostdata = devinfo;
 
 	/* USB has unusual DMA-alignment requirements: Although the
 	 * starting address of each scatter-gather element doesn't matter,
@@ -778,6 +781,11 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 	 */
 	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
 
+	if (devinfo->flags & US_FL_MAX_SECTORS_64)
+		blk_queue_max_hw_sectors(sdev->request_queue, 64);
+	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+		blk_queue_max_hw_sectors(sdev->request_queue, 240);
+
 	return 0;
 }
 
@@ -887,8 +895,9 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct Scsi_Host *shost = NULL;
 	struct uas_dev_info *devinfo;
 	struct usb_device *udev = interface_to_usbdev(intf);
+	unsigned long dev_flags;
 
-	if (!uas_use_uas_driver(intf, id))
+	if (!uas_use_uas_driver(intf, id, &dev_flags))
 		return -ENODEV;
 
 	if (uas_switch_interface(udev, intf))
@@ -910,8 +919,7 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	devinfo->udev = udev;
 	devinfo->resetting = 0;
 	devinfo->shutdown = 0;
-	devinfo->flags = id->driver_info;
-	usb_stor_adjust_quirks(udev, &devinfo->flags);
+	devinfo->flags = dev_flags;
 	init_usb_anchor(&devinfo->cmd_urbs);
 	init_usb_anchor(&devinfo->sense_urbs);
 	init_usb_anchor(&devinfo->data_urbs);

drivers/usb/storage/usb.c

@@ -479,7 +479,8 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 			US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
 			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
 			US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
-			US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES);
+			US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
+			US_FL_MAX_SECTORS_240);
 
 	p = quirks;
 	while (*p) {
@@ -520,6 +521,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 		case 'f':
 			f |= US_FL_NO_REPORT_OPCODES;
 			break;
+		case 'g':
+			f |= US_FL_MAX_SECTORS_240;
+			break;
 		case 'h':
 			f |= US_FL_CAPACITY_HEURISTICS;
 			break;
@@ -1080,7 +1084,7 @@ static int storage_probe(struct usb_interface *intf,
 
 	/* If uas is enabled and this device can do uas then ignore it. */
 #if IS_ENABLED(CONFIG_USB_UAS)
-	if (uas_use_uas_driver(intf, id))
+	if (uas_use_uas_driver(intf, id, NULL))
 		return -ENXIO;
 #endif
 

include/linux/usb_usual.h

@@ -77,6 +77,8 @@
 		/* Cannot handle ATA_12 or ATA_16 CDBs */	\
 	US_FLAG(NO_REPORT_OPCODES,	0x04000000)		\
 		/* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */	\
+	US_FLAG(MAX_SECTORS_240,	0x08000000)		\
+		/* Sets max_sectors to 240 */			\
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };