Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits)
  Driver core: Don't call put methods while holding a spinlock
  Driver core: Remove unneeded routines from driver core
  Driver core: Fix potential deadlock in driver core
  PCI: enable driver multi-threaded probe
  Driver Core: add ability for drivers to do a threaded probe
  sysfs: add proper sysfs_init() prototype
  drivers/base: check errors
  drivers/base: Platform notify needs to occur before drivers attach to the device
  v4l-dev2: handle __must_check
  add CONFIG_ENABLE_MUST_CHECK
  add __must_check to device management code
  Driver core: fixed add_bind_files() definition
  Driver core: fix comments in drivers/base/power/resume.c
  sysfs_remove_bin_file: no return value, dump_stack on error
  kobject: must_check fixes
  Driver core: add ability for devices to create and remove bin files
  Class: add support for class interfaces for devices
  Driver core: create devices/virtual/ tree
  Driver core: add device_rename function
  Driver core: add ability for classes to handle devices properly
  ...

Documentation/ABI/obsolete/devfs → Documentation/ABI/removed/devfs

@@ -1,13 +1,12 @@
 What:		devfs
-Date:		July 2005
+Date:		July 2005 (scheduled), finally removed in kernel v2.6.18
 Contact:	Greg Kroah-Hartman <[email protected]>
 Description:
 	devfs has been unmaintained for a number of years, has unfixable
 	races, contains a naming policy within the kernel that is
 	against the LSB, and can be replaced by using udev.
-	The files fs/devfs/*, include/linux/devfs_fs*.h will be removed,
+	The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
 	along with the the assorted devfs function calls throughout the
 	kernel tree.
 
 Users:
-

Documentation/ABI/testing/sysfs-power

@@ -0,0 +1,88 @@
+What:		/sys/power/
+Date:		August 2006
+Contact:	Rafael J. Wysocki <[email protected]>
+Description:
+		The /sys/power directory will contain files that will
+		provide a unified interface to the power management
+		subsystem.
+
+What:		/sys/power/state
+Date:		August 2006
+Contact:	Rafael J. Wysocki <[email protected]>
+Description:
+		The /sys/power/state file controls the system power state.
+		Reading from this file returns what states are supported,
+		which is hard-coded to 'standby' (Power-On Suspend), 'mem'
+		(Suspend-to-RAM), and 'disk' (Suspend-to-Disk).
+
+		Writing to this file one of these strings causes the system to
+		transition into that state. Please see the file
+		Documentation/power/states.txt for a description of each of
+		these states.
+
+What:		/sys/power/disk
+Date:		August 2006
+Contact:	Rafael J. Wysocki <[email protected]>
+Description:
+		The /sys/power/disk file controls the operating mode of the
+		suspend-to-disk mechanism.  Reading from this file returns
+		the name of the method by which the system will be put to
+		sleep on the next suspend.  There are four methods supported:
+		'firmware' - means that the memory image will be saved to disk
+		by some firmware, in which case we also assume that the
+		firmware will handle the system suspend.
+		'platform' - the memory image will be saved by the kernel and
+		the system will be put to sleep by the platform driver (e.g.
+		ACPI or other PM registers).
+		'shutdown' - the memory image will be saved by the kernel and
+		the system will be powered off.
+		'reboot' - the memory image will be saved by the kernel and
+		the system will be rebooted.
+
+		The suspend-to-disk method may be chosen by writing to this
+		file one of the accepted strings:
+
+		'firmware'
+		'platform'
+		'shutdown'
+		'reboot'
+
+		It will only change to 'firmware' or 'platform' if the system
+		supports that.
+
+What:		/sys/power/image_size
+Date:		August 2006
+Contact:	Rafael J. Wysocki <[email protected]>
+Description:
+		The /sys/power/image_size file controls the size of the image
+		created by the suspend-to-disk mechanism.  It can be written a
+		string representing a non-negative integer that will be used
+		as an upper limit of the image size, in bytes.  The kernel's
+		suspend-to-disk code will do its best to ensure the image size
+		will not exceed this number.  However, if it turns out to be
+		impossible, the kernel will try to suspend anyway using the
+		smallest image possible.  In particular, if "0" is written to
+		this file, the suspend image will be as small as possible.
+
+		Reading from this file will display the current image size
+		limit, which is set to 500 MB by default.
+
+What:		/sys/power/pm_trace
+Date:		August 2006
+Contact:	Rafael J. Wysocki <[email protected]>
+Description:
+		The /sys/power/pm_trace file controls the code which saves the
+		last PM event point in the RTC across reboots, so that you can
+		debug a machine that just hangs during suspend (or more
+		commonly, during resume).  Namely, the RTC is only used to save
+		the last PM event point if this file contains '1'.  Initially
+		it contains '0' which may be changed to '1' by writing a
+		string representing a nonzero integer into it.
+
+		To use this debugging feature you should attempt to suspend
+		the machine, then reboot it and run
+
+		dmesg -s 1000000 | grep 'hash matches'
+
+		CAUTION: Using it will cause your machine's real-time (CMOS)
+		clock to be set to a random invalid time after a resume.

Documentation/feature-removal-schedule.txt

@@ -6,6 +6,21 @@ be removed from this file.
 
 ---------------------------
 
+What:	/sys/devices/.../power/state
+	dev->power.power_state
+	dpm_runtime_{suspend,resume)()
+When:	July 2007
+Why:	Broken design for runtime control over driver power states, confusing
+	driver-internal runtime power management with:  mechanisms to support
+	system-wide sleep state transitions; event codes that distinguish
+	different phases of swsusp "sleep" transitions; and userspace policy
+	inputs.  This framework was never widely used, and most attempts to
+	use it were broken.  Drivers should instead be exposing domain-specific
+	interfaces either to kernel or to userspace.
+Who:	Pavel Machek <[email protected]>
+
+---------------------------
+
 What:	RAW driver (CONFIG_RAW_DRIVER)
 When:	December 2005
 Why:	declared obsolete since kernel 2.6.3
@@ -294,3 +309,15 @@ Why:	The frame diverter is included in most distribution kernels, but is
 	It is not clear if anyone is still using it.
 Who:	Stephen Hemminger <[email protected]>
 
+---------------------------
+
+
+What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When:	Oktober 2008
+Why:	The stacking of class devices makes these values misleading and
+	inconsistent.
+	Class devices should not carry any of these properties, and bus
+	devices have SUBSYTEM and DRIVER as a replacement.
+Who:	Kay Sievers <[email protected]>
+
+---------------------------