tpm/tpm_crb: Use start method value from ACPI table directly

This patch gets rid of dealing with intermediate flag for start method
and use start method value from ACPI table directly.

For ARM64, the locality is handled by Trust Zone in FW.  The layout
does not have crb_regs_head.  It is hitting the following line.
dev_warn(dev, FW_BUG "Bad ACPI memory layout");

Current code excludes CRB_FL_ACPI_START for this check.  Now since
ARM64 support for TPM CRB is added, CRB_FL_CRB_SMC_START should also be
excluded from this check.

For goIdle and cmdReady where code was excluding CRB_FL_ACPI_START only
(do nothing for ACPI start method), CRB_FL_CRB_SMC_START was also
excluded as ARM64 SMC start method does not have TPM_CRB_CTRL_REQ.

However with special PPT workaround requiring CRB_FL_CRB_START to be
set in addition to CRB_FL_ACPI_START and the addition flag of SMC
start method CRB_FL_CRB_SMC_START, the code has become difficult to
maintain and undrestand.  It is better to make code deal with start
method value from ACPI table directly.

Signed-off-by: Jiandi An <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Tested-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>

drivers/char/tpm/tpm_crb.c

@@ -92,14 +92,9 @@ enum crb_status {
 	CRB_DRV_STS_COMPLETE	= BIT(0),
 };
 
-enum crb_flags {
-	CRB_FL_ACPI_START	= BIT(0),
-	CRB_FL_CRB_START	= BIT(1),
-	CRB_FL_CRB_SMC_START	= BIT(2),
-};
-
 struct crb_priv {
-	unsigned int flags;
+	u32 sm;
+	const char *hid;
 	void __iomem *iobase;
 	struct crb_regs_head __iomem *regs_h;
 	struct crb_regs_tail __iomem *regs_t;
@@ -128,14 +123,16 @@ struct tpm2_crb_smc {
  * Anyhow, we do not wait here as a consequent CMD_READY request
  * will be handled correctly even if idle was not completed.
  *
- * The function does nothing for devices with ACPI-start method.
+ * The function does nothing for devices with ACPI-start method
+ * or SMC-start method.
  *
  * Return: 0 always
  */
 static int __maybe_unused crb_go_idle(struct device *dev, struct crb_priv *priv)
 {
-	if ((priv->flags & CRB_FL_ACPI_START) ||
-	    (priv->flags & CRB_FL_CRB_SMC_START))
+	if ((priv->sm == ACPI_TPM2_START_METHOD) ||
+	    (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) ||
+	    (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC))
 		return 0;
 
 	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
@@ -174,14 +171,16 @@ static bool crb_wait_for_reg_32(u32 __iomem *reg, u32 mask, u32 value,
  * The device should respond within TIMEOUT_C.
  *
  * The function does nothing for devices with ACPI-start method
+ * or SMC-start method.
  *
  * Return: 0 on success -ETIME on timeout;
  */
 static int __maybe_unused crb_cmd_ready(struct device *dev,
 					struct crb_priv *priv)
 {
-	if ((priv->flags & CRB_FL_ACPI_START) ||
-	    (priv->flags & CRB_FL_CRB_SMC_START))
+	if ((priv->sm == ACPI_TPM2_START_METHOD) ||
+	    (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) ||
+	    (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC))
 		return 0;
 
 	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
@@ -325,13 +324,20 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	/* Make sure that cmd is populated before issuing start. */
 	wmb();
 
-	if (priv->flags & CRB_FL_CRB_START)
+	/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
+	 * report only ACPI start but in practice seems to require both
+	 * CRB start, hence invoking CRB start method if hid == MSFT0101.
+	 */
+	if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) ||
+	    (priv->sm == ACPI_TPM2_MEMORY_MAPPED) ||
+	    (!strcmp(priv->hid, "MSFT0101")))
 		iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
 
-	if (priv->flags & CRB_FL_ACPI_START)
+	if ((priv->sm == ACPI_TPM2_START_METHOD) ||
+	    (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD))
 		rc = crb_do_acpi_start(chip);
 
-	if (priv->flags & CRB_FL_CRB_SMC_START) {
+	if (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
 		iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
 		rc = tpm_crb_smc_start(&chip->dev, priv->smc_func_id);
 	}
@@ -345,7 +351,9 @@ static void crb_cancel(struct tpm_chip *chip)
 
 	iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
 
-	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
+	if (((priv->sm == ACPI_TPM2_START_METHOD) ||
+	    (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)) &&
+	     crb_do_acpi_start(chip))
 		dev_err(&chip->dev, "ACPI Start failed\n");
 }
 
@@ -458,7 +466,8 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 	 * the control area, as one nice sane region except for some older
 	 * stuff that puts the control area outside the ACPI IO region.
 	 */
-	if (!(priv->flags & CRB_FL_ACPI_START)) {
+	if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) ||
+	    (priv->sm == ACPI_TPM2_MEMORY_MAPPED)) {
 		if (buf->control_address == io_res.start +
 		    sizeof(*priv->regs_h))
 			priv->regs_h = priv->iobase;
@@ -552,18 +561,6 @@ static int crb_acpi_add(struct acpi_device *device)
 	if (!priv)
 		return -ENOMEM;
 
-	/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
-	 * report only ACPI start but in practice seems to require both
-	 * ACPI start and CRB start.
-	 */
-	if (sm == ACPI_TPM2_COMMAND_BUFFER || sm == ACPI_TPM2_MEMORY_MAPPED ||
-	    !strcmp(acpi_device_hid(device), "MSFT0101"))
-		priv->flags |= CRB_FL_CRB_START;
-
-	if (sm == ACPI_TPM2_START_METHOD ||
-	    sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)
-		priv->flags |= CRB_FL_ACPI_START;
-
 	if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
 		if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) {
 			dev_err(dev,
@@ -574,9 +571,11 @@ static int crb_acpi_add(struct acpi_device *device)
 		}
 		crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf));
 		priv->smc_func_id = crb_smc->smc_func_id;
-		priv->flags |= CRB_FL_CRB_SMC_START;
 	}
 
+	priv->sm = sm;
+	priv->hid = acpi_device_hid(device);
+
 	rc = crb_map_io(device, priv, buf);
 	if (rc)
 		return rc;