pcmcia: simplify Status, ExtStatus register access

The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were only accessed to enable audio output for some drivers and IRQ for serial_cs.c. The former also required setting config_req_t.Attributes to CONF_ENABLE_SPKR; the latter can be simplified to setting this field to CONF_ENABLE_ESR. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] Tested-by: Wolfram Sang <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
josf · Sep 29, 2010 · fc30110 · fc30110
1 parent 1a4a046
commit fc30110
Show file tree

Hide file tree

Showing 16 changed files with 38 additions and 53 deletions.
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -175,10 +175,8 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
@@ -334,10 +334,8 @@ static int axnet_config(struct pcmcia_device *link)
     if (!link->irq)
 	    goto failed;
 
-    if (resource_size(link->resource[1]) == 8) {
+    if (resource_size(link->resource[1]) == 8)
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
-	link->conf.Status = CCSR_AUDIO_ENA;
-    }
 
     ret = pcmcia_request_configuration(link, &link->conf);
     if (ret)

diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
@@ -560,10 +560,9 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
 	if (!link->irq)
 		return NULL;
 
-	if (resource_size(link->resource[1]) == 8) {
+	if (resource_size(link->resource[1]) == 8)
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
-		link->conf.Status = CCSR_AUDIO_ENA;
-	}
+
 	if ((link->manf_id == MANFID_IBM) &&
 	    (link->card_id == PRODID_IBM_HOME_AND_AWAY))
 		link->conf.ConfigIndex |= 0x10;

diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
@@ -446,7 +446,6 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     int i;
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
-    link->conf.Status = CCSR_AUDIO_ENA;
     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[1]->end = 8;
 
@@ -640,7 +639,6 @@ static int osi_config(struct pcmcia_device *link)
     int i, j;
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
-    link->conf.Status = CCSR_AUDIO_ENA;
     link->resource[0]->end = 64;
     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[1]->end = 8;

diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -812,10 +812,9 @@ xirc2ps_config(struct pcmcia_device * link)
     if (local->modem) {
 	int pass;
 
-	if (do_sound) {
+	if (do_sound)
 	    link->conf.Attributes |= CONF_ENABLE_SPKR;
-	    link->conf.Status |= CCSR_AUDIO_ENA;
-	}
+
 	link->resource[1]->end = 8;
 	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	if (local->dingo) {

diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
@@ -158,10 +158,8 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */

diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
@@ -175,10 +175,8 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */

diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
@@ -484,10 +484,8 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 	       "(default 0x%02X)\n", cfg->index, dflt->index);
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */

diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
@@ -36,7 +36,7 @@ typedef struct config_t {
 	unsigned int	Attributes;
 	unsigned int	IntType;
 	unsigned int	ConfigBase;
-	unsigned char	Status, Option, ExtStatus;
+	unsigned char	Option;
 	unsigned int	CardValues;
 
 	struct resource io[MAX_IO_WIN]; /* io ports */

diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
@@ -441,6 +441,8 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	struct pcmcia_socket *s = p_dev->socket;
 	config_t *c;
 	pccard_io_map iomap;
+	unsigned char status = 0;
+	unsigned char ext_status = 0;
 
 	if (!(s->state & SOCKET_PRESENT))
 		return -ENODEV;
@@ -476,12 +478,21 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 		s->socket.flags |= SS_ZVCARD | SS_IOCARD;
 	if (req->Attributes & CONF_ENABLE_DMA)
 		s->socket.flags |= SS_DMA_MODE;
-	if (req->Attributes & CONF_ENABLE_SPKR)
+	if (req->Attributes & CONF_ENABLE_SPKR) {
 		s->socket.flags |= SS_SPKR_ENA;
+		status = CCSR_AUDIO_ENA;
+		if (!(req->Present & PRESENT_STATUS))
+			dev_warn(&p_dev->dev, "speaker requested, but "
+					      "PRESENT_STATUS not set!\n");
+	}
 	if (req->Attributes & CONF_ENABLE_IRQ)
 		s->socket.io_irq = s->pcmcia_irq;
 	else
 		s->socket.io_irq = 0;
+	if (req->Attributes & CONF_ENABLE_ESR) {
+		req->Present |= PRESENT_EXT_STATUS;
+		ext_status = ESR_REQ_ATTN_ENA;
+	}
 	s->ops->set_socket(s, &s->socket);
 	s->lock_count++;
 
@@ -513,14 +524,13 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option);
 		mdelay(40);
 	}
-	if (req->Present & PRESENT_STATUS) {
-		c->Status = req->Status;
-		pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status);
-	}
-	if (req->Present & PRESENT_EXT_STATUS) {
-		c->ExtStatus = req->ExtStatus;
-		pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus);
-	}
+	if (req->Present & PRESENT_STATUS)
+		pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status);
+
+	if (req->Present & PRESENT_EXT_STATUS)
+		pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1,
+					&ext_status);
+
 	if (req->Present & PRESENT_IOBASE_0) {
 		u8 b = c->io[0].start & 0xff;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b);

diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1608,10 +1608,8 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
@@ -183,10 +183,8 @@ static void quirk_config_socket(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
 
-	if (info->multi) {
-		link->conf.Present |= PRESENT_EXT_STATUS;
-		link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
-	}
+	if (info->multi)
+		link->conf.Attributes |= CONF_ENABLE_ESR;
 }
 
 static const struct serial_quirk quirks[] = {
@@ -336,10 +334,9 @@ static int serial_probe(struct pcmcia_device *link)
 	link->priv = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	if (do_sound) {
+	if (do_sound)
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
-		link->conf.Status = CCSR_AUDIO_ENA;
-	}
+
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return serial_config(link);

diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -550,10 +550,8 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;

diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -302,10 +302,8 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;

diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -281,10 +281,8 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;

diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
@@ -24,7 +24,6 @@ typedef struct config_req_t {
     u_int	Attributes;
     u_int	IntType;
     u_int	ConfigBase;
-    u_char	Status, ExtStatus;
     u_char	ConfigIndex;
     u_int	Present;
 } config_req_t;
@@ -34,6 +33,7 @@ typedef struct config_req_t {
 #define CONF_ENABLE_DMA		0x02
 #define CONF_ENABLE_SPKR	0x04
 #define CONF_ENABLE_PULSE_IRQ	0x08
+#define CONF_ENABLE_ESR		0x10
 #define CONF_VALID_CLIENT	0x100
 
 /* IntType field */