Merge tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "This series is larger than I would like to submit for -rc4. My
  original intent were to sent it to either -rc2 or -rc3. Unfortunately,
  due to my vacations, I got a lot of pending stuff after my return, and
  had to do some biz trips, with prevented me to send this earlier.

  Several fixes:

   - some fixes at atomisp staging driver

   - several gcc 7 warning fixes

   - cleanup media SVG files, in order to fix PDF build on some distros

   - fix random Kconfig build of venus driver

   - some fixes for the venus driver

   - some changes from semaphone to mutex in ngene's driver

   - some locking fixes at dib0700 driver

   - several fixes on ngene's driver and frontends to make it properly
     support some new boards added on Kernel 4.13

   - some fixes to CEC drivers

   - omap_vout: vrfb: convert to dmaengine

   - docs-rst: document EBUSY for VIDIOC_S_FMT

  Please notice that the big diffstat changes here are at the SVG files.

  Visually, the images look the same, but the file size is now a lot
  smaller than before, and they don't use some XML tags that would cause
  them to be badly parsed by some ImageMagick versions, or to require a
  lot of memory by TeTex, with would break PDF output on some
  distributions"

* tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (68 commits)
  media: atomisp2: array underflow in imx_enum_frame_size()
  media: atomisp2: array underflow in ap1302_enum_frame_size()
  media: atomisp2: Array underflow in atomisp_enum_input()
  media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS
  media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
  media: venus: don't abuse dma_alloc for non-DMA allocations
  media: venus: hfi: fix error handling in hfi_sys_init_done()
  media: venus: fix compile-test build on non-qcom ARM platform
  media: venus: mark PM functions as __maybe_unused
  media: cec-notifier: small improvements
  media: pulse8-cec: persistent_config should be off by default
  media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES
  media: staging: atomisp: array underflow in ioctl
  media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
  media: svg: avoid too long lines
  media: svg files: simplify files
  media: selection.svg: simplify the SVG file
  media: vimc: set id_table for platform drivers
  media: staging: atomisp: disable warnings with cc-disable-warning
  media: davinci: variable 'common' set but not used
  ...

Documentation/media/uapi/v4l/vidioc-g-fmt.rst

@@ -147,3 +147,9 @@ appropriately. The generic error codes are described at the
 EINVAL
     The struct :c:type:`v4l2_format` ``type`` field is
     invalid or the requested buffer type not supported.
+
+EBUSY
+    The device is busy and cannot change the format. This could be
+    because or the device is streaming or buffers are allocated or
+    queued to the driver. Relevant for :ref:`VIDIOC_S_FMT
+    <VIDIOC_G_FMT>` only.

Documentation/media/v4l-drivers/imx.rst

@@ -607,8 +607,9 @@ References
 
 Authors
 -------
-Steve Longerbeam <[email protected]>
-Philipp Zabel <[email protected]>
-Russell King <[email protected]>
+
+- Steve Longerbeam <[email protected]>
+- Philipp Zabel <[email protected]>
+- Russell King <[email protected]>
 
 Copyright (C) 2012-2017 Mentor Graphics Inc.

Documentation/media/v4l-drivers/index.rst

@@ -41,6 +41,7 @@ For more details see the file COPYING in the source distribution of Linux.
 	cx88
 	davinci-vpbe
 	fimc
+	imx
 	ivtv
 	max2175
 	meye

drivers/media/cec/cec-adap.c

@@ -559,7 +559,7 @@ EXPORT_SYMBOL_GPL(cec_transmit_done);
 
 void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status)
 {
-	switch (status) {
+	switch (status & ~CEC_TX_STATUS_MAX_RETRIES) {
 	case CEC_TX_STATUS_OK:
 		cec_transmit_done(adap, status, 0, 0, 0, 0);
 		return;

drivers/media/cec/cec-notifier.c

@@ -87,6 +87,9 @@ EXPORT_SYMBOL_GPL(cec_notifier_put);
 
 void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa)
 {
+	if (n == NULL)
+		return;
+
 	mutex_lock(&n->lock);
 	n->phys_addr = pa;
 	if (n->callback)
@@ -100,6 +103,9 @@ void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n,
 {
 	u16 pa = CEC_PHYS_ADDR_INVALID;
 
+	if (n == NULL)
+		return;
+
 	if (edid && edid->extensions)
 		pa = cec_get_edid_phys_addr((const u8 *)edid,
 				EDID_LENGTH * (edid->extensions + 1), NULL);

drivers/media/dvb-core/dvb_ca_en50221.c

@@ -349,7 +349,8 @@ static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
 	/* read the buffer size from the CAM */
 	if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0)
 		return ret;
-	if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0)
+	ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ);
+	if (ret != 0)
 		return ret;
 	if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2)
 		return -EIO;
@@ -644,72 +645,101 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
 		}
 		buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer);
 
-		if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) {
+		if (buf_free < (ca->slot_info[slot].link_buf_size +
+				DVB_RINGBUFFER_PKTHDRSIZE)) {
 			status = -EAGAIN;
 			goto exit;
 		}
 	}
 
-	/* check if there is data available */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
-		goto exit;
-	if (!(status & STATUSREG_DA)) {
-		/* no data */
-		status = 0;
-		goto exit;
-	}
-
-	/* read the amount of data */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0)
-		goto exit;
-	bytes_read = status << 8;
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0)
-		goto exit;
-	bytes_read |= status;
+	if (ca->pub->read_data &&
+	    (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_LINKINIT)) {
+		if (ebuf == NULL)
+			status = ca->pub->read_data(ca->pub, slot, buf,
+						    sizeof(buf));
+		else
+			status = ca->pub->read_data(ca->pub, slot, buf, ecount);
+		if (status < 0)
+			return status;
+		bytes_read =  status;
+		if (status == 0)
+			goto exit;
+	} else {
 
-	/* check it will fit */
-	if (ebuf == NULL) {
-		if (bytes_read > ca->slot_info[slot].link_buf_size) {
-			pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
-			       ca->dvbdev->adapter->num, bytes_read,
-			       ca->slot_info[slot].link_buf_size);
-			ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-			status = -EIO;
+		/* check if there is data available */
+		status = ca->pub->read_cam_control(ca->pub, slot,
+						   CTRLIF_STATUS);
+		if (status < 0)
 			goto exit;
-		}
-		if (bytes_read < 2) {
-			pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
-			       ca->dvbdev->adapter->num);
-			ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-			status = -EIO;
+		if (!(status & STATUSREG_DA)) {
+			/* no data */
+			status = 0;
 			goto exit;
 		}
-	} else {
-		if (bytes_read > ecount) {
-			pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
-			       ca->dvbdev->adapter->num);
-			status = -EIO;
+
+		/* read the amount of data */
+		status = ca->pub->read_cam_control(ca->pub, slot,
+						   CTRLIF_SIZE_HIGH);
+		if (status < 0)
+			goto exit;
+		bytes_read = status << 8;
+		status = ca->pub->read_cam_control(ca->pub, slot,
+						   CTRLIF_SIZE_LOW);
+		if (status < 0)
 			goto exit;
+		bytes_read |= status;
+
+		/* check it will fit */
+		if (ebuf == NULL) {
+			if (bytes_read > ca->slot_info[slot].link_buf_size) {
+				pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
+				       ca->dvbdev->adapter->num, bytes_read,
+				       ca->slot_info[slot].link_buf_size);
+				ca->slot_info[slot].slot_state =
+						     DVB_CA_SLOTSTATE_LINKINIT;
+				status = -EIO;
+				goto exit;
+			}
+			if (bytes_read < 2) {
+				pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
+				       ca->dvbdev->adapter->num);
+				ca->slot_info[slot].slot_state =
+						     DVB_CA_SLOTSTATE_LINKINIT;
+				status = -EIO;
+				goto exit;
+			}
+		} else {
+			if (bytes_read > ecount) {
+				pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
+				       ca->dvbdev->adapter->num);
+				status = -EIO;
+				goto exit;
+			}
 		}
-	}
 
-	/* fill the buffer */
-	for (i = 0; i < bytes_read; i++) {
-		/* read byte and check */
-		if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0)
-			goto exit;
+		/* fill the buffer */
+		for (i = 0; i < bytes_read; i++) {
+			/* read byte and check */
+			status = ca->pub->read_cam_control(ca->pub, slot,
+							   CTRLIF_DATA);
+			if (status < 0)
+				goto exit;
 
-		/* OK, store it in the buffer */
-		buf[i] = status;
-	}
+			/* OK, store it in the buffer */
+			buf[i] = status;
+		}
 
-	/* check for read error (RE should now be 0) */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
-		goto exit;
-	if (status & STATUSREG_RE) {
-		ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-		status = -EIO;
-		goto exit;
+		/* check for read error (RE should now be 0) */
+		status = ca->pub->read_cam_control(ca->pub, slot,
+						   CTRLIF_STATUS);
+		if (status < 0)
+			goto exit;
+		if (status & STATUSREG_RE) {
+			ca->slot_info[slot].slot_state =
+						     DVB_CA_SLOTSTATE_LINKINIT;
+			status = -EIO;
+			goto exit;
+		}
 	}
 
 	/* OK, add it to the receive buffer, or copy into external buffer if supplied */
@@ -762,6 +792,10 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
 	if (bytes_write > ca->slot_info[slot].link_buf_size)
 		return -EINVAL;
 
+	if (ca->pub->write_data &&
+	    (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_LINKINIT))
+		return ca->pub->write_data(ca->pub, slot, buf, bytes_write);
+
 	/* it is possible we are dealing with a single buffer implementation,
 	   thus if there is data available for read or if there is even a read
 	   already in progress, we do nothing but awake the kernel thread to
@@ -1176,7 +1210,8 @@ static int dvb_ca_en50221_thread(void *data)
 
 					pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n",
 					       ca->dvbdev->adapter->num);
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
+					ca->slot_info[slot].slot_state =
+						DVB_CA_SLOTSTATE_UNINITIALISED;
 					dvb_ca_en50221_thread_update_delay(ca);
 					break;
 				}

drivers/media/dvb-core/dvb_ca_en50221.h

@@ -41,6 +41,8 @@
  * @write_attribute_mem: function for writing attribute memory on the CAM
  * @read_cam_control:	function for reading the control interface on the CAM
  * @write_cam_control:	function for reading the control interface on the CAM
+ * @read_data:		function for reading data (block mode)
+ * @write_data:		function for writing data (block mode)
  * @slot_reset:		function to reset the CAM slot
  * @slot_shutdown:	function to shutdown a CAM slot
  * @slot_ts_enable:	function to enable the Transport Stream on a CAM slot
@@ -66,6 +68,11 @@ struct dvb_ca_en50221 {
 	int (*write_cam_control)(struct dvb_ca_en50221 *ca,
 				 int slot, u8 address, u8 value);
 
+	int (*read_data)(struct dvb_ca_en50221 *ca,
+				int slot, u8 *ebuf, int ecount);
+	int (*write_data)(struct dvb_ca_en50221 *ca,
+				int slot, u8 *ebuf, int ecount);
+
 	int (*slot_reset)(struct dvb_ca_en50221 *ca, int slot);
 	int (*slot_shutdown)(struct dvb_ca_en50221 *ca, int slot);
 	int (*slot_ts_enable)(struct dvb_ca_en50221 *ca, int slot);

drivers/media/dvb-frontends/cxd2841er.c

@@ -3279,7 +3279,10 @@ static int cxd2841er_get_frontend(struct dvb_frontend *fe,
 	else if (priv->state == STATE_ACTIVE_TC)
 		cxd2841er_read_status_tc(fe, &status);
 
-	cxd2841er_read_signal_strength(fe);
+	if (priv->state == STATE_ACTIVE_TC || priv->state == STATE_ACTIVE_S)
+		cxd2841er_read_signal_strength(fe);
+	else
+		p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 
 	if (status & FE_HAS_LOCK) {
 		cxd2841er_read_snr(fe);

drivers/media/dvb-frontends/drx39xyj/drx_driver.h

@@ -307,7 +307,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner,
 * \def DRX_UNKNOWN
 * \brief Generic UNKNOWN value for DRX enumerated types.
 *
-* Used to indicate that the parameter value is unknown or not yet initalized.
+* Used to indicate that the parameter value is unknown or not yet initialized.
 */
 #ifndef DRX_UNKNOWN
 #define DRX_UNKNOWN (254)
@@ -449,19 +449,6 @@ MACROS
 #define DRX_16TO8(x) ((u8) (((u16)x) & 0xFF)), \
 			((u8)((((u16)x)>>8)&0xFF))
 
-/**
-* \brief Macro to sign extend signed 9 bit value to signed  16 bit value
-*/
-#define DRX_S9TOS16(x) ((((u16)x)&0x100) ? ((s16)((u16)(x)|0xFF00)) : (x))
-
-/**
-* \brief Macro to sign extend signed 9 bit value to signed  16 bit value
-*/
-#define DRX_S24TODRXFREQ(x) ((((u32) x) & 0x00800000UL) ? \
-				 ((s32) \
-				    (((u32) x) | 0xFF000000)) : \
-				 ((s32) x))
-
 /**
 * \brief Macro to convert 16 bit register value to a s32
 */

drivers/media/dvb-frontends/lnbh25.c

@@ -76,8 +76,8 @@ static int lnbh25_read_vmon(struct lnbh25_priv *priv)
 			return ret;
 		}
 	}
-	print_hex_dump_bytes("lnbh25_read_vmon: ",
-		DUMP_PREFIX_OFFSET, status, sizeof(status));
+	dev_dbg(&priv->i2c->dev, "%s(): %*ph\n",
+		__func__, (int) sizeof(status), status);
 	if ((status[0] & (LNBH25_STATUS_OFL | LNBH25_STATUS_VMON)) != 0) {
 		dev_err(&priv->i2c->dev,
 			"%s(): voltage in failure state, status reg 0x%x\n",
@@ -178,7 +178,7 @@ struct dvb_frontend *lnbh25_attach(struct dvb_frontend *fe,
 	fe->ops.release_sec = lnbh25_release;
 	fe->ops.set_voltage = lnbh25_set_voltage;
 
-	dev_err(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n",
+	dev_info(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n",
 		__func__, priv->i2c_address);
 	return fe;
 }