Merge remote-tracking branch 'ovl/rename2' into for-linus

Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt

@@ -13,6 +13,7 @@ Required properties:
 - touchscreen-size-y	  : See touchscreen.txt
 
 Optional properties:
+- firmware-name		  : File basename (string) for board specific firmware
 - touchscreen-inverted-x  : See touchscreen.txt
 - touchscreen-inverted-y  : See touchscreen.txt
 - touchscreen-swapped-x-y : See touchscreen.txt

Documentation/devicetree/bindings/mmc/sdhci-st.txt

@@ -10,7 +10,7 @@ Required properties:
 			subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
 			family).
 
-- clock-names:		Should be "mmc".
+- clock-names:		Should be "mmc" and "icn".  (NB: The latter is not compulsory)
 			See: Documentation/devicetree/bindings/resource-names.txt
 - clocks:		Phandle to the clock.
 			See: Documentation/devicetree/bindings/clock/clock-bindings.txt

Documentation/filesystems/Locking

@@ -51,8 +51,6 @@ prototypes:
 	int (*rmdir) (struct inode *,struct dentry *);
 	int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
 	int (*rename) (struct inode *, struct dentry *,
-			struct inode *, struct dentry *);
-	int (*rename2) (struct inode *, struct dentry *,
 			struct inode *, struct dentry *, unsigned int);
 	int (*readlink) (struct dentry *, char __user *,int);
 	const char *(*get_link) (struct dentry *, struct inode *, void **);
@@ -83,8 +81,7 @@ symlink:	yes
 mkdir:		yes
 unlink:		yes (both)
 rmdir:		yes (both)	(see below)
-rename:		yes (all)	(see below)
-rename2:	yes (all)	(see below)
+rename:	yes (all)	(see below)
 readlink:	no
 get_link:	no
 setattr:	yes
@@ -102,8 +99,7 @@ tmpfile:	no
 
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
 victim.
-	cross-directory ->rename() and rename2() has (per-superblock)
-->s_vfs_rename_sem.
+	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
 
 See Documentation/filesystems/directory-locking for more detailed discussion
 of the locking scheme for directory operations.

Documentation/filesystems/directory-locking

@@ -19,7 +19,7 @@ locks victim and calls the method.  Locks are exclusive.
 
 4) rename() that is _not_ cross-directory.  Locking rules: caller locks
 the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in rename2() flags argument) lock both.  In any case,
+RENAME_EXCHANGE in flags argument) lock both.  In any case,
 if the target already exists, lock it.  If the source is a non-directory,
 lock it.  If we need to lock both, lock them in inode pointer order.
 Then call the method.  All locks are exclusive.

Documentation/filesystems/porting

@@ -592,3 +592,7 @@ in your dentry operations instead.
 	work just as well; if it's something more complicated, use dentry->d_parent.
 	Just be careful not to assume that fetching it more than once will yield
 	the same value - in RCU mode it could change under you.
+--
+[mandatory]
+	->rename() has an added flags argument.  Any flags not handled by the
+        filesystem should result in EINVAL being returned.

Documentation/filesystems/vfs.txt

@@ -346,8 +346,6 @@ struct inode_operations {
 	int (*rmdir) (struct inode *,struct dentry *);
 	int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
 	int (*rename) (struct inode *, struct dentry *,
-			struct inode *, struct dentry *);
-	int (*rename2) (struct inode *, struct dentry *,
 			struct inode *, struct dentry *, unsigned int);
 	int (*readlink) (struct dentry *, char __user *,int);
 	const char *(*get_link) (struct dentry *, struct inode *,
@@ -416,11 +414,8 @@ otherwise noted.
   rename: called by the rename(2) system call to rename the object to
 	have the parent and name given by the second inode and dentry.
 
-  rename2: this has an additional flags argument compared to rename.
-	If no flags are supported by the filesystem then this method
-	need not be implemented.  If some flags are supported then the
-	filesystem must return -EINVAL for any unsupported or unknown
-	flags.  Currently the following flags are implemented:
+	The filesystem must return -EINVAL for any unsupported or
+	unknown	flags.  Currently the following flags are implemented:
 	(1) RENAME_NOREPLACE: this flag indicates that if the target
 	of the rename exists the rename should fail with -EEXIST
 	instead of replacing the target.  The VFS already checks for

Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst

@@ -144,7 +144,7 @@ logical address types are already defined will return with error ``EBUSY``.
 
        -  ``flags``
 
-       -  Flags. No flags are defined yet, so set this to 0.
+       -  Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
 
     -  .. row 7
 
@@ -201,6 +201,25 @@ logical address types are already defined will return with error ``EBUSY``.
           give the CEC framework more information about the device type, even
           though the framework won't use it directly in the CEC message.
 
+.. _cec-log-addrs-flags:
+
+.. flat-table:: Flags for struct cec_log_addrs
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+
+    -  .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
+
+       -  ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
+
+       -  1
+
+       -  By default if no logical address of the requested type can be claimed, then
+	  it will go back to the unconfigured state. If this flag is set, then it will
+	  fallback to the Unregistered logical address. Note that if the Unregistered
+	  logical address was explicitly requested, then this flag has no effect.
+
 .. _cec-versions:
 
 .. flat-table:: CEC Versions

Documentation/media/uapi/cec/cec-ioc-dqevent.rst

@@ -64,15 +64,19 @@ it is guaranteed that the state did change in between the two events.
 
        -  ``phys_addr``
 
-       -  The current physical address.
+       -  The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
+          valid physical address is set.
 
     -  .. row 2
 
        -  __u16
 
        -  ``log_addr_mask``
 
-       -  The current set of claimed logical addresses.
+       -  The current set of claimed logical addresses. This is 0 if no logical
+          addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
+	  If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
+	  has the unregistered logical address. In that case all other bits are 0.
 
 
 

MAINTAINERS

@@ -1625,6 +1625,7 @@ N:	rockchip
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <[email protected]>
 M:	Krzysztof Kozlowski <[email protected]>
+R:	Javier Martinez Canillas <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
@@ -2485,7 +2486,7 @@ F:	include/net/bluetooth/
 BONDING DRIVER
 M:	Jay Vosburgh <[email protected]>
 M:	Veaceslav Falico <[email protected]>
-M:	Andy Gospodarek <[email protected]>
+M:	Andy Gospodarek <[email protected]>
 L:	[email protected]
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -2500,7 +2501,7 @@ S:	Supported
 F:	kernel/bpf/
 
 BROADCOM B44 10/100 ETHERNET DRIVER
-M:	Gary Zambrano <zambrano@broadcom.com>
+M:	Michael Chan <michael.chan@broadcom.com>
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/broadcom/b44.*
@@ -3269,7 +3270,7 @@ S:	Maintained
 F:	drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-M:	Florian Fainelli <[email protected]>
+M:	Florian Fainelli <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
@@ -6102,7 +6103,7 @@ S:	Supported
 F:	drivers/cpufreq/intel_pstate.c
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M:	Maik Broemme <mbroemme@plusserver.de>
+M:	Maik Broemme <mbroemme@libmpq.org>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
@@ -8160,6 +8161,15 @@ S:	Maintained
 W:	https://fedorahosted.org/dropwatch/
 F:	net/core/drop_monitor.c
 
+NETWORKING [DSA]
+M:	Andrew Lunn <[email protected]>
+M:	Vivien Didelot <[email protected]>
+M:	Florian Fainelli <[email protected]>
+S:	Maintained
+F:	net/dsa/
+F:	include/net/dsa.h
+F:	drivers/net/dsa/
+
 NETWORKING [GENERAL]
 M:	"David S. Miller" <[email protected]>
 L:	[email protected]
@@ -12568,7 +12578,7 @@ F:	include/linux/if_*vlan.h
 F:	net/8021q/
 
 VLYNQ BUS
-M:	Florian Fainelli <[email protected]>
+M:	Florian Fainelli <[email protected]>
 L:	[email protected] (subscribers-only)
 S:	Maintained
 F:	drivers/vlynq/vlynq.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*

arch/alpha/include/asm/uaccess.h

@@ -371,14 +371,6 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
 	return __cu_len;
 }
 
-extern inline long
-__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
-{
-	if (__access_ok((unsigned long)validate, len, get_fs()))
-		len = __copy_tofrom_user_nocheck(to, from, len);
-	return len;
-}
-
 #define __copy_to_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(to);						\
@@ -393,17 +385,22 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-
 extern inline long
 copy_to_user(void __user *to, const void *from, long n)
 {
-	return __copy_tofrom_user((__force void *)to, from, n, to);
+	if (likely(__access_ok((unsigned long)to, n, get_fs())))
+		n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
+	return n;
 }
 
 extern inline long
 copy_from_user(void *to, const void __user *from, long n)
 {
-	return __copy_tofrom_user(to, (__force void *)from, n, from);
+	if (likely(__access_ok((unsigned long)from, n, get_fs())))
+		n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
+	else
+		memset(to, 0, n);
+	return n;
 }
 
 extern void __do_clear_user(void);

arch/arc/include/asm/uaccess.h

@@ -83,7 +83,10 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
@@ -101,7 +104,11 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	mov %R1, 0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -2,6 +2,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
 

arch/arm/boot/dts/bcm283x.dtsi

@@ -2,7 +2,6 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
@@ -13,6 +12,8 @@
 	compatible = "brcm,bcm2835";
 	model = "BCM2835";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	chosen {
 		bootargs = "earlyprintk console=ttyAMA0";

arch/arm/boot/dts/stih407-family.dtsi

@@ -550,8 +550,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -565,8 +566,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};

arch/arm/boot/dts/stih410.dtsi

@@ -41,7 +41,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";

arch/arm/common/locomo.c

@@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = {
 
 static void locomo_handler(struct irq_desc *desc)
 {
-	struct locomo *lchip = irq_desc_get_chip_data(desc);
+	struct locomo *lchip = irq_desc_get_handler_data(desc);
 	int req, i;
 
 	/* Acknowledge the parent IRQ */
@@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	irq_set_chip_data(lchip->irq, lchip);
-	irq_set_chained_handler(lchip->irq, locomo_handler);
+	irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
 
 	/* Install handlers for IRQ_LOCOMO_* */
 	for ( ; irq <= lchip->irq_base + 3; irq++) {