Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/jkirsher/next-queue

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2019-04-16

This series contains updates to i40e driver only.

Adam fixes i40e so that queues can be restored to its original value if
configuring queue channels fails.  Bumped the maximum API version
supported and added the API version to error messages to clarify
supported firmware API versions.  Fixed the problem with the driver
being able to add only 7 multicast MAC address filters instead of 16.

Aleksandr adds support for Dynamic Device Personalization (DDP) which
allows loading profiles that change the way internal parser interprets
processed frames.

Nick fixes an issue where if we modify the VLAN stripping options when a
port VLAN is configured, it will break traffic for the VSI, so prevent
changes from being made.

Jake fixes an issue where a device reset can mess up the clock time
because we reset the clock time based on the kernel time every reset.
This causes us to potentially completely reset the PTP time, and can
cause unexpected behavior in programs like ptp4l.

Piotr fixes an LED blink issue with the 'ethtool -p' command, so that
identification blinking will work on all hardware.

Chinh fixed the error returned to correctly reflect the current state
when LLDP or DCBx is not in an operational state.

Grzegorz cleans up a misleading error message when untrusted VF tries to
exceed addresses beyond the NIC limit.

Carolyn fixes the error return code to correctly reflect the error case.

v2: updated the URL provided in the DDP patch (#2)
====================

Signed-off-by: David S. Miller <[email protected]>

drivers/net/ethernet/intel/i40e/Makefile

@@ -21,6 +21,7 @@ i40e-objs := i40e_main.o \
 	i40e_diag.o	\
 	i40e_txrx.o	\
 	i40e_ptp.o	\
+	i40e_ddp.o \
 	i40e_client.o   \
 	i40e_virtchnl_pf.o \
 	i40e_xsk.o

drivers/net/ethernet/intel/i40e/i40e.h

@@ -321,6 +321,29 @@ struct i40e_udp_port_config {
 	u8 filter_index;
 };
 
+#define I40_DDP_FLASH_REGION 100
+#define I40E_PROFILE_INFO_SIZE 48
+#define I40E_MAX_PROFILE_NUM 16
+#define I40E_PROFILE_LIST_SIZE \
+	(I40E_PROFILE_INFO_SIZE * I40E_MAX_PROFILE_NUM + 4)
+#define I40E_DDP_PROFILE_PATH "intel/i40e/ddp/"
+#define I40E_DDP_PROFILE_NAME_MAX 64
+
+int i40e_ddp_load(struct net_device *netdev, const u8 *data, size_t size,
+		  bool is_add);
+int i40e_ddp_flash(struct net_device *netdev, struct ethtool_flash *flash);
+
+struct i40e_ddp_profile_list {
+	u32 p_count;
+	struct i40e_profile_info p_info[0];
+};
+
+struct i40e_ddp_old_profile_list {
+	struct list_head list;
+	size_t old_ddp_size;
+	u8 old_ddp_buf[0];
+};
+
 /* macros related to FLX_PIT */
 #define I40E_FLEX_SET_FSIZE(fsize) (((fsize) << \
 				    I40E_PRTQF_FLX_PIT_FSIZE_SHIFT) & \
@@ -589,6 +612,8 @@ struct i40e_pf {
 	struct sk_buff *ptp_tx_skb;
 	unsigned long ptp_tx_start;
 	struct hwtstamp_config tstamp_config;
+	struct timespec64 ptp_prev_hw_time;
+	ktime_t ptp_reset_start;
 	struct mutex tmreg_lock; /* Used to protect the SYSTIME registers. */
 	u32 ptp_adj_mult;
 	u32 tx_hwtstamp_timeouts;
@@ -610,6 +635,8 @@ struct i40e_pf {
 	u16 override_q_count;
 	u16 last_sw_conf_flags;
 	u16 last_sw_conf_valid_flags;
+	/* List to keep previous DDP profiles to be rolled back in the future */
+	struct list_head ddp_old_prof;
 };
 
 /**
@@ -1083,6 +1110,8 @@ void i40e_ptp_rx_hwtstamp(struct i40e_pf *pf, struct sk_buff *skb, u8 index);
 void i40e_ptp_set_increment(struct i40e_pf *pf);
 int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr);
 int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr);
+void i40e_ptp_save_hw_time(struct i40e_pf *pf);
+void i40e_ptp_restore_hw_time(struct i40e_pf *pf);
 void i40e_ptp_init(struct i40e_pf *pf);
 void i40e_ptp_stop(struct i40e_pf *pf);
 int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi);

drivers/net/ethernet/intel/i40e/i40e_adminq.c

@@ -749,7 +749,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw,
 	if (val >= hw->aq.num_asq_entries) {
 		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
 			   "AQTX: head overrun at %d\n", val);
-		status = I40E_ERR_QUEUE_EMPTY;
+		status = I40E_ERR_ADMIN_QUEUE_FULL;
 		goto asq_send_command_error;
 	}
 

drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h

@@ -11,8 +11,8 @@
  */
 
 #define I40E_FW_API_VERSION_MAJOR	0x0001
-#define I40E_FW_API_VERSION_MINOR_X722	0x0006
-#define I40E_FW_API_VERSION_MINOR_X710	0x0007
+#define I40E_FW_API_VERSION_MINOR_X722	0x0008
+#define I40E_FW_API_VERSION_MINOR_X710	0x0008
 
 #define I40E_FW_MINOR_VERSION(_h) ((_h)->mac.type == I40E_MAC_XL710 ? \
 					I40E_FW_API_VERSION_MINOR_X710 : \