Merge tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Lots of small fixes for Arm SoCs this time, nothing too worrying:

   - omap/beaglebone boot regression fix in gpt12 timer

   - revert for i.mx8 soc driver breaking as a platform_driver

   - kexec/kdump fixes for op-tee

   - various fixes for incorrect DT settings on imx, mvebu, omap, stm32,
     and tegra causing problems.

   - device tree fixes for static checks in nomadik, versatile, stm32

   - code fixes for issues found in build testing and with static
     checking on tegra, ixp4xx, imx, omap"

* tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
  soc: ixp4xx/qmgr: fix invalid __iomem access
  soc: ixp4xx: fix printing resources
  ARM: ixp4xx: goramo_mlr depends on old PCI driver
  ARM: ixp4xx: fix compile-testing soc drivers
  soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR
  ARM: dts: nomadik: Fix up interrupt controller node names
  ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
  ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
  ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
  omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
  ARM: dts: am437x-l4: fix typo in can@0 node
  ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  bus: ti-sysc: AM3: RNG is GP only
  ARM: omap2+: hwmod: fix potential NULL pointer access
  arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
  arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
  ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
  ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
  ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
  arm64: dts: ls1028: sl28: fix networking for variant 2
  ...

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1595,7 +1595,7 @@
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
 				clocks = <&dcan1_fck>;
-				clock-name = "fck";
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -582,7 +582,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -388,13 +388,13 @@
 
 		pinctrl_power_button: powerbutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
 			>;
 		};
 
 		pinctrl_power_out: poweroutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
 			>;
 		};
 

arch/arm/boot/dts/imx6qdl-sr-som.dtsi

@@ -54,7 +54,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
 	phy-mode = "rgmii-id";
-	phy-reset-duration = <2>;
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 

arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi

@@ -43,6 +43,7 @@
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -30,14 +30,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -487,6 +479,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -755,14 +755,14 @@
 			status = "disabled";
 		};
 
-		vica: intc@10140000 {
+		vica: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@10140020 {
+		vicb: interrupt-controller@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi

@@ -37,7 +37,7 @@
 		poll-interval = <20>;
 
 		/*
-		 * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
+		 * The EXTi IRQ line 3 is shared with ethernet,
 		 * so mark this as polled GPIO key.
 		 */
 		button-0 {
@@ -46,6 +46,16 @@
 			gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
 		};
 
+		/*
+		 * The EXTi IRQ line 6 is shared with touchscreen,
+		 * so mark this as polled GPIO key.
+		 */
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+		};
+
 		/*
 		 * The EXTi IRQ line 0 is shared with PMIC,
 		 * so mark this as polled GPIO key.
@@ -60,13 +70,6 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button-1 {
-			label = "TA2-GPIO-B";
-			linux,code = <KEY_B>;
-			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
 		button-3 {
 			label = "TA4-GPIO-D";
 			linux,code = <KEY_D>;
@@ -82,6 +85,7 @@
 			label = "green:led5";
 			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
+			status = "disabled";
 		};
 
 		led-1 {
@@ -185,8 +189,8 @@
 	touchscreen@38 {
 		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
-		interrupt-parent = <&gpiog>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		interrupt-parent = <&gpioc>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
 	};
 };
 

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi

@@ -12,6 +12,8 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		ethernet1 = &ksz8851;
+		rtc0 = &hwrtc;
+		rtc1 = &rtc;
 	};
 
 	memory@c0000000 {
@@ -138,6 +140,7 @@
 			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500>;
 			reset-deassert-us = <500>;
+			smsc,disable-energy-detect;
 			interrupt-parent = <&gpioi>;
 			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		};
@@ -248,7 +251,7 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
-	rtc@32 {
+	hwrtc: rtc@32 {
 		compatible = "microcrystal,rv8803";
 		reg = <0x32>;
 	};

arch/arm/mach-imx/common.h

@@ -68,7 +68,6 @@ void imx_set_cpu_arg(int cpu, u32 arg);
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
 void imx_smp_prepare(void);
-void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
@@ -81,6 +80,7 @@ void imx_gpc_mask_all(void);
 void imx_gpc_restore_all(void);
 void imx_gpc_hwirq_mask(unsigned int hwirq);
 void imx_gpc_hwirq_unmask(unsigned int hwirq);
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn);
 void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);

arch/arm/mach-imx/mmdc.c

@@ -103,6 +103,7 @@ struct mmdc_pmu {
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
 	struct fsl_mmdc_devtype_data *devtype_data;
+	struct clk *mmdc_ipg_clk;
 };
 
 /*
@@ -462,11 +463,14 @@ static int imx_mmdc_remove(struct platform_device *pdev)
 
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
+	iounmap(pmu_mmdc->mmdc_base);
+	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
 	return 0;
 }
 
-static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base)
+static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
+			      struct clk *mmdc_ipg_clk)
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
@@ -494,6 +498,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	}
 
 	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	if (mmdc_num == 0)
 		name = "mmdc";
 	else
@@ -529,7 +534,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 #else
 #define imx_mmdc_remove NULL
-#define imx_mmdc_perf_init(pdev, mmdc_base) 0
+#define imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk) 0
 #endif
 
 static int imx_mmdc_probe(struct platform_device *pdev)
@@ -567,7 +572,13 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	val &= ~(1 << BP_MMDC_MAPSR_PSD);
 	writel_relaxed(val, reg);
 
-	return imx_mmdc_perf_init(pdev, mmdc_base);
+	err = imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk);
+	if (err) {
+		iounmap(mmdc_base);
+		clk_disable_unprepare(mmdc_ipg_clk);
+	}
+
+	return err;
 }
 
 int imx_mmdc_get_ddr_type(void)

arch/arm/mach-ixp4xx/Kconfig

@@ -91,6 +91,7 @@ config MACH_IXDP465
 
 config MACH_GORAMO_MLR
 	bool "GORAMO Multi Link Router"
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support GORAMO
 	  MultiLink router.

arch/arm/mach-omap2/omap_hwmod.c

@@ -3776,6 +3776,7 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 	struct omap_hwmod_ocp_if *oi;
 	struct clockdomain *clkdm;
 	struct clk_hw_omap *clk;
+	struct clk_hw *hw;
 
 	if (!oh)
 		return NULL;
@@ -3792,7 +3793,14 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 		c = oi->_clk;
 	}
 
-	clk = to_clk_hw_omap(__clk_get_hw(c));
+	hw = __clk_get_hw(c);
+	if (!hw)
+		return NULL;
+
+	clk = to_clk_hw_omap(hw);
+	if (!clk)
+		return NULL;
+
 	clkdm = clk->clkdm;
 	if (!clkdm)
 		return NULL;

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts

@@ -54,13 +54,15 @@
 
 &mscc_felix_port0 {
 	label = "swp0";
+	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	status = "okay";
 };
 
 &mscc_felix_port1 {
 	label = "swp1";
+	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
 	status = "okay";

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -66,7 +66,7 @@
 		};
 	};
 
-	sysclk: clock-sysclk {
+	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;

arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts

@@ -19,6 +19,8 @@
 	aliases {
 		spi0 = &spi0;
 		ethernet1 = &eth1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
 	};
 
 	chosen {
@@ -119,6 +121,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <100000>;
+	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
 	rtc@6f {