iio: light: ROHM BU27008 color sensor

The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two out of the rest three (blue, clear, IR) can be
selected to be simultaneously measured. Typical application is adjusting
LCD backlight of TVs, mobile phones and tablet PCs.

Add initial support for the ROHM BU27008 color sensor.
 - raw_read() of RGB and clear channels
 - triggered buffer w/ DRDY interrtupt

Signed-off-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/2594162f0e44148cffb1fb05f1d6edfde6bd11bc.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>

drivers/iio/light/Kconfig

@@ -289,6 +289,20 @@ config JSA1212
 	  To compile this driver as a module, choose M here:
 	  the module will be called jsa1212.
 
+config ROHM_BU27008
+	tristate "ROHM BU27008 color (RGB+C/IR) sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_GTS_HELPER
+	help
+	  Enable support for the ROHM BU27008 color sensor.
+	  The ROHM BU27008 is a sensor with 5 photodiodes (red, green,
+	  blue, clear and IR) with four configurable channels. Red and
+	  green being always available and two out of the rest three
+	  (blue, clear, IR) can be selected to be simultaneously measured.
+	  Typical application is adjusting LCD backlight of TVs,
+	  mobile phones and tablet PCs.
+
 config ROHM_BU27034
 	tristate "ROHM BU27034 ambient light sensor"
 	depends on I2C

drivers/iio/light/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_NOA1305)		+= noa1305.o
 obj-$(CONFIG_OPT3001)		+= opt3001.o
 obj-$(CONFIG_OPT4001)		+= opt4001.o
 obj-$(CONFIG_PA12203001)	+= pa12203001.o
+obj-$(CONFIG_ROHM_BU27008)	+= rohm-bu27008.o
 obj-$(CONFIG_ROHM_BU27034)	+= rohm-bu27034.o
 obj-$(CONFIG_RPR0521)		+= rpr0521.o
 obj-$(CONFIG_SI1133)		+= si1133.o