Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kerne…

…l/linux into for-armsoc

Documentation/DocBook/device-drivers.tmpl

@@ -102,9 +102,12 @@ X!Iinclude/linux/kobject.h
 !Iinclude/linux/device.h
      </sect1>
      <sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
+!Edrivers/base/syscore.c
 !Edrivers/base/class.c
+!Idrivers/base/node.c
 !Edrivers/base/firmware_class.c
 !Edrivers/base/transport_class.c
 <!-- Cannot be included, because
@@ -113,13 +116,18 @@ X!Iinclude/linux/kobject.h
      exceed allowed 44 characters maximum
 X!Edrivers/base/attribute_container.c
 -->
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
 <!--
 X!Edrivers/base/interface.c
 -->
 !Iinclude/linux/platform_device.h
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
      </sect1>
      <sect1><title>Device Drivers Power Management</title>
 !Edrivers/base/power/main.c
@@ -219,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/input/event-codes.txt

@@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in
 class/input/event*/device/capabilities/, and the properties of a device are
 provided in class/input/event*/device/properties.
 
-Types:
-==========
-Types are groupings of codes under a logical input construct. Each type has a
-set of applicable codes to be used in generating events. See the Codes section
-for details on valid codes for each type.
+Event types:
+===========
+Event types are groupings of codes under a logical input construct. Each
+type has a set of applicable codes to be used in generating events. See the
+Codes section for details on valid codes for each type.
 
 * EV_SYN:
   - Used as markers to separate events. Events may be separated in time or in
@@ -63,9 +63,9 @@ for details on valid codes for each type.
 * EV_FF_STATUS:
   - Used to receive force feedback device status.
 
-Codes:
-==========
-Codes define the precise type of event.
+Event codes:
+===========
+Event codes define the precise type of event.
 
 EV_SYN:
 ----------
@@ -220,6 +220,56 @@ EV_PWR:
 EV_PWR events are a special type of event used specifically for power
 mangement. Its usage is not well defined. To be addressed later.
 
+Device properties:
+=================
+Normally, userspace sets up an input device based on the data it emits,
+i.e., the event types. In the case of two devices emitting the same event
+types, additional information can be provided in the form of device
+properties.
+
+INPUT_PROP_DIRECT + INPUT_PROP_POINTER:
+--------------------------------------
+The INPUT_PROP_DIRECT property indicates that device coordinates should be
+directly mapped to screen coordinates (not taking into account trivial
+transformations, such as scaling, flipping and rotating). Non-direct input
+devices require non-trivial transformation, such as absolute to relative
+transformation for touchpads. Typical direct input devices: touchscreens,
+drawing tablets; non-direct devices: touchpads, mice.
+
+The INPUT_PROP_POINTER property indicates that the device is not transposed
+on the screen and thus requires use of an on-screen pointer to trace user's
+movements.  Typical pointer devices: touchpads, tablets, mice; non-pointer
+device: touchscreen.
+
+If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
+considered undefined and the device type should be deduced in the
+traditional way, using emitted event types.
+
+INPUT_PROP_BUTTONPAD:
+--------------------
+For touchpads where the button is placed beneath the surface, such that
+pressing down on the pad causes a button click, this property should be
+set. Common in clickpad notebooks and macbooks from 2009 and onwards.
+
+Originally, the buttonpad property was coded into the bcm5974 driver
+version field under the name integrated button. For backwards
+compatibility, both methods need to be checked in userspace.
+
+INPUT_PROP_SEMI_MT:
+------------------
+Some touchpads, most common between 2008 and 2011, can detect the presence
+of multiple contacts without resolving the individual positions; only the
+number of contacts and a rectangular shape is known. For such
+touchpads, the semi-mt property should be set.
+
+Depending on the device, the rectangle may enclose all touches, like a
+bounding box, or just some of them, for instance the two most recent
+touches. The diversity makes the rectangle of limited use, but some
+gestures can normally be extracted from it.
+
+If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
+device.
+
 Guidelines:
 ==========
 The guidelines below ensure proper single-touch and multi-finger functionality.
@@ -240,6 +290,8 @@ used to report when a touch is active on the screen.
 BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
 contact. BTN_TOOL_<name> events should be reported where possible.
 
+For new hardware, INPUT_PROP_DIRECT should be set.
+
 Trackpads:
 ----------
 Legacy trackpads that only provide relative position information must report
@@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active
 on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
 be used to report the number of touches active on the trackpad.
 
+For new hardware, INPUT_PROP_POINTER should be set.
+
 Tablets:
 ----------
 BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
@@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.
 BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
 meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
 purpose on the device.
+
+For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.

Documentation/sysctl/kernel.txt

@@ -601,6 +601,8 @@ can be ORed together:
         instead of using the one provided by the hardware.
  512 - A kernel warning has occurred.
 1024 - A module from drivers/staging was loaded.
+2048 - The system is working around a severe firmware bug.
+4096 - An out-of-tree module has been loaded.
 
 ==============================================================
 

MAINTAINERS

@@ -159,7 +159,7 @@ S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	[email protected]
 W:	http://serial.sourceforge.net
 S:	Maintained
@@ -789,12 +789,6 @@ F:	arch/arm/mach-mx*/
 F:	arch/arm/mach-imx/
 F:	arch/arm/plat-mxc/
 
-ARM/FREESCALE IMX51
-M:	Amit Kucheria <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-mx5/
-
 ARM/FREESCALE IMX6
 M:	Shawn Guo <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
@@ -1783,9 +1777,9 @@ X:	net/wireless/wext*
 
 CHAR and MISC DRIVERS
 M:	Arnd Bergmann <[email protected]>
-M:	Greg Kroah-Hartman <[email protected]>
+M:	Greg Kroah-Hartman <[email protected]>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S:	Maintained
+S:	Supported
 F:	drivers/char/*
 F:	drivers/misc/*
 
@@ -2287,7 +2281,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <[email protected]>
 L:	[email protected]
-T:	quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
+T:	quilt http://xenotime.net/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/
 
@@ -2320,7 +2314,7 @@ F:	lib/lru_cache.c
 F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
@@ -3992,11 +3986,11 @@ M:	Rusty Russell <[email protected]>
 L:	[email protected]
 W:	http://lguest.ozlabs.org/
 S:	Odd Fixes
-F:	Documentation/virtual/lguest/
+F:	arch/x86/include/asm/lguest*.h
 F:	arch/x86/lguest/
 F:	drivers/lguest/
 F:	include/linux/lguest*.h
-F:	arch/x86/include/asm/lguest*.h
+F:	tools/lguest/
 
 LINUX FOR IBM pSERIES (RS/6000)
 M:	Paul Mackerras <[email protected]>
@@ -4136,7 +4130,7 @@ L:	[email protected]
 W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
 F:	Documentation/ldm.txt
-F:	fs/partitions/ldm.*
+F:	block/partitions/ldm.*
 
 LogFS
 M:	Joern Engel <[email protected]>
@@ -5633,7 +5627,7 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
 F:	arch/s390/
 F:	drivers/s390/
-F:	fs/partitions/ibm.c
+F:	block/partitions/ibm.c
 F:	Documentation/s390/
 F:	Documentation/DocBook/s390*
 
@@ -6276,15 +6270,15 @@ S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-M:	Greg Kroah-Hartman <[email protected]>
+M:	Greg Kroah-Hartman <[email protected]>
 L:	[email protected]
-S:	Maintained
+S:	Supported
 
 STAGING SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	[email protected]
-S:	Maintained
+S:	Supported
 F:	drivers/staging/
 
 STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@@ -6396,11 +6390,6 @@ M:	Omar Ramirez Luna <[email protected]>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/
 
-STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS
-L:	[email protected]
-S:	Odd Fixes
-F:	drivers/staging/tm6000/
-
 STAGING - USB ENE SM/MS CARD READER DRIVER
 M:	Al Cho <[email protected]>
 S:	Odd Fixes
@@ -6669,8 +6658,8 @@ S:	Maintained
 K:	^Subject:.*(?i)trivial
 
 TTY LAYER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
-S:	Maintained
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/tty/
 F:	drivers/tty/serial/serial_core.c
@@ -6958,7 +6947,7 @@ S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	[email protected]
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6973,9 +6962,8 @@ S:	Maintained
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-M:	Greg Kroah-Hartman <[email protected]>
+M:	Greg Kroah-Hartman <[email protected]>
 L:	[email protected]
-W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
@@ -7003,7 +6991,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	[email protected]
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@@ -7090,7 +7078,7 @@ F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <[email protected]>
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -186,6 +186,9 @@ config GENERIC_ISA_DMA
 config FIQ
 	bool
 
+config NEED_RET_TO_USER
+	bool
+
 config ARCH_MTD_XIP
 	bool
 
@@ -479,13 +482,15 @@ config ARCH_IOP13XX
 	select ARCH_SUPPORTS_MSI
 	select VMSPLIT_1G
 	select NEED_MACH_MEMORY_H
+	select NEED_RET_TO_USER
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_RET_TO_USER
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
@@ -497,6 +502,7 @@ config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_RET_TO_USER
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB

arch/arm/include/asm/hardware/entry-macro-iomd.S

@@ -11,14 +11,6 @@
 /* IOC / IOMD based hardware */
 #include <asm/hardware/iomd.h>
 
-		.macro	disable_fiq
-		mov	r12, #ioc_base_high
-		.if	ioc_base_low
-		orr	r12, r12, #ioc_base_low
-		.endif
-		strb	r12, [r12, #0x38]	@ Disable FIQ register
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
 		ldr	\tmp, =irq_prio_h