net: dsa: mt7530: fix handling of BPDUs on MT7530 switch

BPDUs are link-local frames, therefore they must be trapped to the CPU
port. Currently, the MT7530 switch treats BPDUs as regular multicast
frames, therefore flooding them to user ports. To fix this, set BPDUs to be
trapped to the CPU port. Group this on mt7530_setup() and
mt7531_setup_common() into mt753x_trap_frames() and call that.

Fixes: b8f126a ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

drivers/net/dsa/mt7530.c

@@ -985,6 +985,14 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 	mutex_unlock(&priv->reg_mutex);
 }
 
+static void
+mt753x_trap_frames(struct mt7530_priv *priv)
+{
+	/* Trap BPDUs to the CPU port(s) */
+	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
+		   MT753X_BPDU_CPU_ONLY);
+}
+
 static int
 mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 {
@@ -2262,6 +2270,8 @@ mt7530_setup(struct dsa_switch *ds)
 
 	priv->p6_interface = PHY_INTERFACE_MODE_NA;
 
+	mt753x_trap_frames(priv);
+
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
 
@@ -2361,9 +2371,7 @@ mt7531_setup_common(struct dsa_switch *ds)
 	struct mt7530_priv *priv = ds->priv;
 	int ret, i;
 
-	/* Trap BPDUs to the CPU port(s) */
-	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
-		   MT753X_BPDU_CPU_ONLY);
+	mt753x_trap_frames(priv);
 
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);