Merge tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and serial driver fixes for 6.5-rc4 for some
  reported problems. Included in here is:

   - TIOCSTI fix for braille readers

   - documentation fix for minor numbers

   - MAINTAINERS update for new serial files in -rc1

   - minor serial driver fixes for reported problems

  All of these have been in linux-next with no reported problems"

* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Preserve original value of DLF register
  tty: serial: sh-sci: Fix sleeping in atomic context
  serial: sifive: Fix sifive_serial_console_setup() section
  Documentation: devices.txt: reconcile serial/ucc_uart minor numers
  MAINTAINERS: Update TTY layer for lists and recently added files
  tty: n_gsm: fix UAF in gsm_cleanup_mux
  TIOCSTI: always enable for CAP_SYS_ADMIN

Documentation/admin-guide/devices.txt

@@ -2691,7 +2691,7 @@
 		 45 = /dev/ttyMM1		Marvell MPSC - port 1 (obsolete unused)
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
 		    ...
-		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
+		 49 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 3
 		 50 = /dev/ttyIOC0		Altix serial card
 		    ...
 		 81 = /dev/ttyIOC31		Altix serial card

MAINTAINERS

@@ -21643,11 +21643,17 @@ F:	Documentation/translations/zh_TW/
 TTY LAYER
 M:	Greg Kroah-Hartman <[email protected]>
 M:	Jiri Slaby <[email protected]>
+L:	[email protected]
+L:	[email protected]
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
 F:	Documentation/driver-api/serial/
 F:	drivers/tty/
+F:	drivers/tty/serial/serial_base.h
+F:	drivers/tty/serial/serial_base_bus.c
 F:	drivers/tty/serial/serial_core.c
+F:	drivers/tty/serial/serial_ctrl.c
+F:	drivers/tty/serial/serial_port.c
 F:	include/linux/selection.h
 F:	include/linux/serial.h
 F:	include/linux/serial_core.h

drivers/tty/n_gsm.c

@@ -3070,8 +3070,10 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
 		gsm->has_devices = false;
 	}
 	for (i = NUM_DLCI - 1; i >= 0; i--)
-		if (gsm->dlci[i])
+		if (gsm->dlci[i]) {
 			gsm_dlci_release(gsm->dlci[i]);
+			gsm->dlci[i] = NULL;
+		}
 	mutex_unlock(&gsm->mutex);
 	/* Now wipe the queues */
 	tty_ldisc_flush(gsm->tty);

drivers/tty/serial/8250/8250_dwlib.c

@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)
 	struct dw8250_port_data *pd = p->private_data;
 	struct dw8250_data *data = to_dw8250_data(pd);
 	struct uart_8250_port *up = up_to_u8250p(p);
-	u32 reg;
+	u32 reg, old_dlf;
 
 	pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
 	if (pd->hw_rs485_support) {
@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)
 	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
 		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
 
+	/* Preserve value written by firmware or bootloader  */
+	old_dlf = dw8250_readl_ext(p, DW_UART_DLF);
 	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
 	reg = dw8250_readl_ext(p, DW_UART_DLF);
-	dw8250_writel_ext(p, DW_UART_DLF, 0);
+	dw8250_writel_ext(p, DW_UART_DLF, old_dlf);
 
 	if (reg) {
 		pd->dlf_size = fls(reg);

drivers/tty/serial/sh-sci.c

@@ -590,7 +590,7 @@ static void sci_start_tx(struct uart_port *port)
 	    dma_submit_error(s->cookie_tx)) {
 		if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
 			/* Switch irq from SCIF to DMA */
-			disable_irq(s->irqs[SCIx_TXI_IRQ]);
+			disable_irq_nosync(s->irqs[SCIx_TXI_IRQ]);
 
 		s->cookie_tx = 0;
 		schedule_work(&s->work_tx);

drivers/tty/serial/sifive.c

@@ -811,7 +811,7 @@ static void sifive_serial_console_write(struct console *co, const char *s,
 	local_irq_restore(flags);
 }
 
-static int __init sifive_serial_console_setup(struct console *co, char *options)
+static int sifive_serial_console_setup(struct console *co, char *options)
 {
 	struct sifive_serial_port *ssp;
 	int baud = SIFIVE_DEFAULT_BAUD_RATE;

drivers/tty/serial/ucc_uart.c

@@ -59,7 +59,7 @@ static int firmware_loaded;
 /* #define LOOPBACK */
 
 /* The major and minor device numbers are defined in
- * http://www.lanana.org/docs/device-list/devices-2.6+.txt.  For the QE
+ * Documentation/admin-guide/devices.txt.  For the QE
  * UART, we have major number 204 and minor numbers 46 - 49, which are the
  * same as for the CPM2.  This decision was made because no Freescale part
  * has both a CPM and a QE.

drivers/tty/tty_io.c

@@ -2285,7 +2285,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
 	char ch, mbz = 0;
 	struct tty_ldisc *ld;
 
-	if (!tty_legacy_tiocsti)
+	if (!tty_legacy_tiocsti && !capable(CAP_SYS_ADMIN))
 		return -EIO;
 
 	if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))