net: introduce generic switch devices support

The goal of this is to provide a possibility to support various switch
chips. Drivers should implement relevant ndos to do so. Now there is
only one ndo defined:
- for getting physical switch id is in place.

Note that user can use random port netdevice to access the switch.

Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Thomas Graf <[email protected]>
Acked-by: Andy Gospodarek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Documentation/networking/switchdev.txt

@@ -0,0 +1,59 @@
+Switch (and switch-ish) device drivers HOWTO
+===========================
+
+Please note that the word "switch" is here used in very generic meaning.
+This include devices supporting L2/L3 but also various flow offloading chips,
+including switches embedded into SR-IOV NICs.
+
+Lets describe a topology a bit. Imagine the following example:
+
+       +----------------------------+    +---------------+
+       |     SOME switch chip       |    |      CPU      |
+       +----------------------------+    +---------------+
+       port1 port2 port3 port4 MNGMNT    |     PCI-E     |
+         |     |     |     |     |       +---------------+
+        PHY   PHY    |     |     |         |  NIC0 NIC1
+                     |     |     |         |   |    |
+                     |     |     +- PCI-E -+   |    |
+                     |     +------- MII -------+    |
+                     +------------- MII ------------+
+
+In this example, there are two independent lines between the switch silicon
+and CPU. NIC0 and NIC1 drivers are not aware of a switch presence. They are
+separate from the switch driver. SOME switch chip is by managed by a driver
+via PCI-E device MNGMNT. Note that MNGMNT device, NIC0 and NIC1 may be
+connected to some other type of bus.
+
+Now, for the previous example show the representation in kernel:
+
+       +----------------------------+    +---------------+
+       |     SOME switch chip       |    |      CPU      |
+       +----------------------------+    +---------------+
+       sw0p0 sw0p1 sw0p2 sw0p3 MNGMNT    |     PCI-E     |
+         |     |     |     |     |       +---------------+
+        PHY   PHY    |     |     |         |  eth0 eth1
+                     |     |     |         |   |    |
+                     |     |     +- PCI-E -+   |    |
+                     |     +------- MII -------+    |
+                     +------------- MII ------------+
+
+Lets call the example switch driver for SOME switch chip "SOMEswitch". This
+driver takes care of PCI-E device MNGMNT. There is a netdevice instance sw0pX
+created for each port of a switch. These netdevices are instances
+of "SOMEswitch" driver. sw0pX netdevices serve as a "representation"
+of the switch chip. eth0 and eth1 are instances of some other existing driver.
+
+The only difference of the switch-port netdevice from the ordinary netdevice
+is that is implements couple more NDOs:
+
+  ndo_switch_parent_id_get - This returns the same ID for two port netdevices
+			     of the same physical switch chip. This is
+			     mandatory to be implemented by all switch drivers
+			     and serves the caller for recognition of a port
+			     netdevice.
+  ndo_switch_parent_* - Functions that serve for a manipulation of the switch
+			chip itself (it can be though of as a "parent" of the
+			port, therefore the name). They are not port-specific.
+			Caller might use arbitrary port netdevice of the same
+			switch and it will make no difference.
+  ndo_switch_port_* - Functions that serve for a port-specific manipulation.

MAINTAINERS

@@ -9059,6 +9059,13 @@ F:	lib/swiotlb.c
 F:	arch/*/kernel/pci-swiotlb.c
 F:	include/linux/swiotlb.h
 
+SWITCHDEV
+M:	Jiri Pirko <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	net/switchdev/
+F:	include/net/switchdev.h
+
 SYNOPSYS ARC ARCHITECTURE
 M:	Vineet Gupta <[email protected]>
 S:	Supported

include/linux/netdevice.h

@@ -1018,6 +1018,12 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev,
  *	performing GSO on a packet. The device returns true if it is
  *	able to GSO the packet, false otherwise. If the return value is
  *	false the stack will do software GSO.
+ *
+ * int (*ndo_switch_parent_id_get)(struct net_device *dev,
+ *				   struct netdev_phys_item_id *psid);
+ *	Called to get an ID of the switch chip this port is part of.
+ *	If driver implements this, it indicates that it represents a port
+ *	of a switch chip.
  */
 struct net_device_ops {
 	int			(*ndo_init)(struct net_device *dev);
@@ -1171,6 +1177,10 @@ struct net_device_ops {
 	int			(*ndo_get_lock_subclass)(struct net_device *dev);
 	bool			(*ndo_gso_check) (struct sk_buff *skb,
 						  struct net_device *dev);
+#ifdef CONFIG_NET_SWITCHDEV
+	int			(*ndo_switch_parent_id_get)(struct net_device *dev,
+							    struct netdev_phys_item_id *psid);
+#endif
 };
 
 /**

include/net/switchdev.h

@@ -0,0 +1,30 @@
+/*
+ * include/net/switchdev.h - Switch device API
+ * Copyright (c) 2014 Jiri Pirko <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _LINUX_SWITCHDEV_H_
+#define _LINUX_SWITCHDEV_H_
+
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_NET_SWITCHDEV
+
+int netdev_switch_parent_id_get(struct net_device *dev,
+				struct netdev_phys_item_id *psid);
+
+#else
+
+static inline int netdev_switch_parent_id_get(struct net_device *dev,
+					      struct netdev_phys_item_id *psid)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
+
+#endif /* _LINUX_SWITCHDEV_H_ */

net/Kconfig

@@ -228,6 +228,7 @@ source "net/vmw_vsock/Kconfig"
 source "net/netlink/Kconfig"
 source "net/mpls/Kconfig"
 source "net/hsr/Kconfig"
+source "net/switchdev/Kconfig"
 
 config RPS
 	boolean

net/Makefile

@@ -73,3 +73,6 @@ obj-$(CONFIG_OPENVSWITCH)	+= openvswitch/
 obj-$(CONFIG_VSOCKETS)	+= vmw_vsock/
 obj-$(CONFIG_NET_MPLS_GSO)	+= mpls/
 obj-$(CONFIG_HSR)		+= hsr/
+ifneq ($(CONFIG_NET_SWITCHDEV),)
+obj-y				+= switchdev/
+endif

net/switchdev/Kconfig

@@ -0,0 +1,13 @@
+#
+# Configuration for Switch device support
+#
+
+config NET_SWITCHDEV
+	boolean "Switch (and switch-ish) device support (EXPERIMENTAL)"
+	depends on INET
+	---help---
+	  This module provides glue between core networking code and device
+	  drivers in order to support hardware switch chips in very generic
+	  meaning of the word "switch". This include devices supporting L2/L3 but
+	  also various flow offloading chips, including switches embedded into
+	  SR-IOV NICs.

net/switchdev/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Switch device API
+#
+
+obj-$(CONFIG_NET_SWITCHDEV) += switchdev.o

net/switchdev/switchdev.c

@@ -0,0 +1,33 @@
+/*
+ * net/switchdev/switchdev.c - Switch device API
+ * Copyright (c) 2014 Jiri Pirko <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <net/switchdev.h>
+
+/**
+ *	netdev_switch_parent_id_get - Get ID of a switch
+ *	@dev: port device
+ *	@psid: switch ID
+ *
+ *	Get ID of a switch this port is part of.
+ */
+int netdev_switch_parent_id_get(struct net_device *dev,
+				struct netdev_phys_item_id *psid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	if (!ops->ndo_switch_parent_id_get)
+		return -EOPNOTSUPP;
+	return ops->ndo_switch_parent_id_get(dev, psid);
+}
+EXPORT_SYMBOL(netdev_switch_parent_id_get);