Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/tiwai/sound Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
kyagi · Dec 13, 2012 · 046e7d6 · 046e7d6
2 parents fe504c5 + 6eb827d
commit 046e7d6
Show file tree

Hide file tree

Showing 610 changed files with 15,782 additions and 8,501 deletions.
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -433,9 +433,9 @@
   /* chip-specific constructor
    * (see "Management of Cards and Components")
    */
-  static int __devinit snd_mychip_create(struct snd_card *card,
-                                         struct pci_dev *pci,
-                                         struct mychip **rchip)
+  static int snd_mychip_create(struct snd_card *card,
+                               struct pci_dev *pci,
+                               struct mychip **rchip)
   {
           struct mychip *chip;
           int err;
@@ -475,8 +475,8 @@
   }
 
   /* constructor -- see "Constructor" sub-section */
-  static int __devinit snd_mychip_probe(struct pci_dev *pci,
-                               const struct pci_device_id *pci_id)
+  static int snd_mychip_probe(struct pci_dev *pci,
+                              const struct pci_device_id *pci_id)
   {
           static int dev;
           struct snd_card *card;
@@ -526,7 +526,7 @@
   }
 
   /* destructor -- see the "Destructor" sub-section */
-  static void __devexit snd_mychip_remove(struct pci_dev *pci)
+  static void snd_mychip_remove(struct pci_dev *pci)
   {
           snd_card_free(pci_get_drvdata(pci));
           pci_set_drvdata(pci, NULL);
@@ -542,9 +542,8 @@
       <para>
         The real constructor of PCI drivers is the <function>probe</function> callback.
       The <function>probe</function> callback and other component-constructors which are called
-      from the <function>probe</function> callback should be defined with
-      the <parameter>__devinit</parameter> prefix. You 
-      cannot use the <parameter>__init</parameter> prefix for them,
+      from the <function>probe</function> callback cannot be used with
+      the <parameter>__init</parameter> prefix
       because any PCI device could be a hotplug device. 
       </para>
 
@@ -728,7 +727,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static void __devexit snd_mychip_remove(struct pci_dev *pci)
+  static void snd_mychip_remove(struct pci_dev *pci)
   {
           snd_card_free(pci_get_drvdata(pci));
           pci_set_drvdata(pci, NULL);
@@ -1058,14 +1057,6 @@
       components are released automatically by this call. 
       </para>
 
-      <para>
-        As further notes, the destructors (both
-      <function>snd_mychip_dev_free</function> and
-      <function>snd_mychip_free</function>) cannot be defined with
-      the <parameter>__devexit</parameter> prefix, because they may be
-      called from the constructor, too, at the false path. 
-      </para>
-
       <para>
       For a device which allows hotplugging, you can use
       <function>snd_card_free_when_closed</function>.  This one will
@@ -1120,9 +1111,9 @@
   }
 
   /* chip-specific constructor */
-  static int __devinit snd_mychip_create(struct snd_card *card,
-                                         struct pci_dev *pci,
-                                         struct mychip **rchip)
+  static int snd_mychip_create(struct snd_card *card,
+                               struct pci_dev *pci,
+                               struct mychip **rchip)
   {
           struct mychip *chip;
           int err;
@@ -1200,7 +1191,7 @@
           .name = KBUILD_MODNAME,
           .id_table = snd_mychip_ids,
           .probe = snd_mychip_probe,
-          .remove = __devexit_p(snd_mychip_remove),
+          .remove = snd_mychip_remove,
   };
 
   /* module initialization */
@@ -1464,11 +1455,6 @@
         </informalexample>
       </para>
 
-      <para>
-      Again, remember that you cannot
-      use the <parameter>__devexit</parameter> prefix for this destructor. 
-      </para>
-
       <para>
       We didn't implement the hardware disabling part in the above.
       If you need to do this, please note that the destructor may be
@@ -1619,7 +1605,7 @@
           .name = KBUILD_MODNAME,
           .id_table = snd_mychip_ids,
           .probe = snd_mychip_probe,
-          .remove = __devexit_p(snd_mychip_remove),
+          .remove = snd_mychip_remove,
   };
 ]]>
           </programlisting>
@@ -1630,11 +1616,7 @@
         The <structfield>probe</structfield> and
       <structfield>remove</structfield> functions have already
       been defined in the previous sections.
-      The <structfield>remove</structfield> function should
-      be defined with the 
-      <function>__devexit_p()</function> macro, so that it's not
-      defined for built-in (and non-hot-pluggable) case. The
-      <structfield>name</structfield> 
+      The <structfield>name</structfield>
       field is the name string of this device. Note that you must not
       use a slash <quote>/</quote> in this string. 
       </para>
@@ -1665,9 +1647,7 @@
       <para>
         Note that these module entries are tagged with
       <parameter>__init</parameter> and 
-      <parameter>__exit</parameter> prefixes, not
-      <parameter>__devinit</parameter> nor
-      <parameter>__devexit</parameter>.
+      <parameter>__exit</parameter> prefixes.
       </para>
 
       <para>
@@ -1918,7 +1898,7 @@
    */
 
   /* create a pcm device */
-  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
+  static int snd_mychip_new_pcm(struct mychip *chip)
   {
           struct snd_pcm *pcm;
           int err;
@@ -1957,7 +1937,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
+  static int snd_mychip_new_pcm(struct mychip *chip)
   {
           struct snd_pcm *pcm;
           int err;
@@ -2124,7 +2104,7 @@
           ....
   }
 
-  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
+  static int snd_mychip_new_pcm(struct mychip *chip)
   {
           struct snd_pcm *pcm;
           ....
@@ -3399,7 +3379,7 @@ struct _snd_pcm_runtime {
 	  <title>Definition of a Control</title>
           <programlisting>
 <![CDATA[
-  static struct snd_kcontrol_new my_control __devinitdata = {
+  static struct snd_kcontrol_new my_control = {
           .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
           .name = "PCM Playback Switch",
           .index = 0,
@@ -3414,13 +3394,6 @@ struct _snd_pcm_runtime {
         </example>
       </para>
 
-      <para>
-        Most likely the control is created via
-      <function>snd_ctl_new1()</function>, and in such a case, you can
-      add the <parameter>__devinitdata</parameter> prefix to the
-      definition as above. 
-      </para>
-
       <para>
         The <structfield>iface</structfield> field specifies the control
       type, <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>, which
@@ -3847,10 +3820,8 @@ struct _snd_pcm_runtime {
 
       <para>
         <function>snd_ctl_new1()</function> allocates a new
-      <structname>snd_kcontrol</structname> instance (that's why the definition
-      of <parameter>my_control</parameter> can be with
-      the <parameter>__devinitdata</parameter> 
-      prefix), and <function>snd_ctl_add</function> assigns the given
+      <structname>snd_kcontrol</structname> instance,
+      and <function>snd_ctl_add</function> assigns the given
       control component to the card. 
       </para>
     </section>
@@ -3896,7 +3867,7 @@ struct _snd_pcm_runtime {
 <![CDATA[
   static DECLARE_TLV_DB_SCALE(db_scale_my_control, -4050, 150, 0);
 
-  static struct snd_kcontrol_new my_control __devinitdata = {
+  static struct snd_kcontrol_new my_control = {
           ...
           .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
                     SNDRV_CTL_ELEM_ACCESS_TLV_READ,
@@ -5761,8 +5732,8 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static int __devinit snd_mychip_probe(struct pci_dev *pci,
-                               const struct pci_device_id *pci_id)
+  static int snd_mychip_probe(struct pci_dev *pci,
+                              const struct pci_device_id *pci_id)
   {
           ....
           struct snd_card *card;
@@ -5787,8 +5758,8 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static int __devinit snd_mychip_probe(struct pci_dev *pci,
-                               const struct pci_device_id *pci_id)
+  static int snd_mychip_probe(struct pci_dev *pci,
+                              const struct pci_device_id *pci_id)
   {
           ....
           struct snd_card *card;
@@ -5825,7 +5796,7 @@ struct _snd_pcm_runtime {
           .name = KBUILD_MODNAME,
           .id_table = snd_my_ids,
           .probe = snd_my_probe,
-          .remove = __devexit_p(snd_my_remove),
+          .remove = snd_my_remove,
   #ifdef CONFIG_PM
           .suspend = snd_my_suspend,
           .resume = snd_my_resume,

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -0,0 +1,15 @@
+* Atmel SSC driver.
+
+Required properties:
+- compatible: "atmel,at91rm9200-ssc" or "atmel,at91sam9g45-ssc"
+	- atmel,at91rm9200-ssc: support pdc transfer
+	- atmel,at91sam9g45-ssc: support dma transfer
+- reg: Should contain SSC registers location and length
+- interrupts: Should contain SSC interrupt
+
+Example:
+ssc0: ssc@fffbc000 {
+	compatible = "atmel,at91rm9200-ssc";
+	reg = <0xfffbc000 0x4000>;
+	interrupts = <14 4 5>;
+};
diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt
@@ -0,0 +1,22 @@
+AK4104 S/PDIF transmitter
+
+This device supports SPI mode only.
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak4104"
+
+  - reg : The chip select number on the SPI bus
+
+Optional properties:
+
+  - reset-gpio : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the device starts.
+
+Example:
+
+spdif: ak4104@0 {
+	compatible = "asahi-kasei,ak4104";
+	reg = <0>;
+	spi-max-frequency = <5000000>;
+};
diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt
@@ -0,0 +1,26 @@
+* Atmel at91sam9g20ek wm8731 audio complex
+
+Required properties:
+  - compatible: "atmel,at91sam9g20ek-wm8731-audio"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,audio-routing: A list of the connections between audio components.
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8731 audio codec
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound {
+	compatible = "atmel,at91sam9g20ek-wm8731-audio";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+	atmel,model = "wm8731 @ AT91SAMG20EK";
+
+	atmel,audio-routing =
+		"Ext Spk", "LHPOUT",
+		"Int MIC", "MICIN";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8731>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt
@@ -18,6 +18,8 @@ Optional properties:
 
  - reset-gpio: 	a GPIO spec to define which pin is connected to the chip's
 		!RESET pin
+ - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
+				is enabled.
 
 Examples:
 

diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be set to <1> if the board capable to detect jack
+- ti,jack_detection: Need to be present if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:
@@ -59,7 +59,7 @@ sound {
 	compatible = "ti,abe-twl6040";
 	ti,model = "SDP4430";
 
-	ti,jack-detection = <1>;
+	ti,jack-detection;
 	ti,mclk-freq = <38400000>;
 
 	ti,mcpdm = <&mcpdm>;

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1905,7 +1905,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     vid             - Vendor ID for the device (optional)
     pid             - Product ID for the device (optional)
     nrpacks	    - Max. number of packets per URB (default: 8)
-    async_unlink    - Use async unlink mode (default: yes)
     device_setup    - Device specific magic number (optional)
                     - Influence depends on the device
                     - Default: 0x0000 
@@ -1917,8 +1916,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     NB: nrpacks parameter can be modified dynamically via sysfs.
         Don't put the value over 20.  Changing via sysfs has no sanity
 	check.
-    NB: async_unlink=0 would cause Oops.  It remains just for
-        debugging purpose (if any).
     NB: ignore_ctl_error=1 may help when you get an error at accessing
         the mixer element such as URB error -22.  This happens on some
         buggy USB device or the controller.

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -29,6 +29,7 @@
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
+		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -445,6 +446,13 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 4 5>;
+				status = "disabled";
+			};
+
 			adc0: adc@fffe0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;