[CPUFREQ] e_powersaver: Check BIOS limit for CPU frequency

Call ACPI function to get BIOS limit for CPU frequency.
Fail if processor would like to run at higher frequency.
Allow user to ignore BIOS limit.

eps: Detected VIA Model D C7-M
eps: Current voltage = 1084mV
eps: Current multiplier = 16
eps: Highest voltage = 1084mV
eps: Highest multiplier = 16
eps: Lowest voltage = 844mV
eps: Lowest multiplier = 4
eps: ACPI limit 1.60GHz

Signed-off-by: Rafał Bilski <[email protected]>
Signed-off-by: Dave Jones <[email protected]>

drivers/cpufreq/e_powersaver.c

@@ -19,6 +19,11 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
 #define EPS_BRAND_C7M	0
 #define EPS_BRAND_C7	1
 #define EPS_BRAND_EDEN	2
@@ -27,6 +32,9 @@
 
 struct eps_cpu_data {
 	u32 fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	u32 bios_limit;
+#endif
 	struct cpufreq_frequency_table freq_table[];
 };
 
@@ -36,6 +44,46 @@ static struct eps_cpu_data *eps_cpu[NR_CPUS];
 static int freq_failsafe_off;
 static int voltage_failsafe_off;
 
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+static int ignore_acpi_limit;
+
+static struct acpi_processor_performance *eps_acpi_cpu_perf;
+
+/* Minimum necessary to get acpi_processor_get_bios_limit() working */
+static int eps_acpi_init(void)
+{
+	eps_acpi_cpu_perf = kzalloc(sizeof(struct acpi_processor_performance),
+				      GFP_KERNEL);
+	if (!eps_acpi_cpu_perf)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map,
+								GFP_KERNEL)) {
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -ENOMEM;
+	}
+
+	if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) {
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -EIO;
+	}
+	return 0;
+}
+
+static int eps_acpi_exit(struct cpufreq_policy *policy)
+{
+	if (eps_acpi_cpu_perf) {
+		acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0);
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+	}
+	return 0;
+}
+#endif
 
 static unsigned int eps_get(unsigned int cpu)
 {
@@ -168,6 +216,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	int k, step, voltage;
 	int ret;
 	int states;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	unsigned int limit;
+#endif
 
 	if (policy->cpu != 0)
 		return -ENODEV;
@@ -271,6 +322,24 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 
 	/* Calc FSB speed */
 	fsb = cpu_khz / current_multiplier;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	/* Check for ACPI processor speed limit */
+	if (!ignore_acpi_limit && !eps_acpi_init()) {
+		if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
+			printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+				limit/1000000,
+				(limit%1000000)/10000);
+			eps_acpi_exit(policy);
+			/* Check if max_multiplier is in BIOS limits */
+			if (limit && max_multiplier * fsb > limit) {
+				printk(KERN_INFO "eps: Aborting.\n");
+				return -EINVAL;
+			}
+		}
+	}
+#endif
+
 	/* Calc number of p-states supported */
 	if (brand == EPS_BRAND_C7M)
 		states = max_multiplier - min_multiplier + 1;
@@ -287,6 +356,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 
 	/* Copy basic values */
 	centaur->fsb = fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	centaur->bios_limit = limit;
+#endif
 
 	/* Fill frequency and MSR value table */
 	f_table = &centaur->freq_table[0];
@@ -377,6 +449,10 @@ module_param(freq_failsafe_off, int, 0644);
 MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
 module_param(voltage_failsafe_off, int, 0644);
 MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+module_param(ignore_acpi_limit, int, 0644);
+MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
+#endif
 
 MODULE_AUTHOR("Rafal Bilski <[email protected]>");
 MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");