Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) trivial: chack -> check typo fix in main Makefile trivial: Add a space (and a comma) to a printk in 8250 driver trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx trivial: Fix misspelling of "firmware" in powerpc Makefile trivial: Fix misspelling of "firmware" in usb.c trivial: Fix misspelling of "firmware" in qla1280.c trivial: Fix misspelling of "firmware" in a100u2w.c trivial: Fix misspelling of "firmware" in megaraid.c trivial: Fix misspelling of "firmware" in ql4_mbx.c trivial: Fix misspelling of "firmware" in acpi_memhotplug.c trivial: Fix misspelling of "firmware" in ipw2100.c trivial: Fix misspelling of "firmware" in atmel.c trivial: Fix misspelled firmware in Kconfig trivial: fix an -> a typos in documentation and comments trivial: fix then -> than typos in comments and documentation trivial: update Jesper Juhl CREDITS entry with new email trivial: fix singal -> signal typo trivial: Fix incorrect use of "loose" in event.c trivial: printk: fix indentation of new_text_line declaration trivial: rtc-stk17ta8: fix sparse warning ...
kyagi · Jan 7, 2009 · 57c44c5 · 57c44c5
2 parents 7605274 + 5a9e67b
commit 57c44c5
Show file tree

Hide file tree

Showing 99 changed files with 133 additions and 130 deletions.
diff --git a/CREDITS b/CREDITS
@@ -1681,7 +1681,7 @@ E: [email protected]
 D: fbdev hacking
 
 N: Jesper Juhl
-E: [email protected]
+E: [email protected]
 D: Various fixes, cleanups and minor features all over the tree.
 D: Wrote initial version of the hdaps driver (since passed on to others).
 S: Lemnosvej 1, 3.tv

diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
@@ -81,8 +81,8 @@ Until this step is completed the driver cannot be unloaded.
 Also echoing either mono ,packet or init in to image_type will free up the
 memory allocated by the driver.
 
-If an user by accident executes steps 1 and 3 above without executing step 2;
-it will make the /sys/class/firmware/dell_rbu/ entries to disappear.
+If a user by accident executes steps 1 and 3 above without executing step 2;
+it will make the /sys/class/firmware/dell_rbu/ entries disappear.
 The entries can be recreated by doing the following
 echo init > /sys/devices/platform/dell_rbu/image_type
 NOTE: echoing init in image_type does not change it original value.

diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet
@@ -74,7 +74,7 @@ a sensor.
 Notice that some banks have both a read and a write address this is how the
 uGuru determines if a read from or a write to the bank is taking place, thus
 when reading you should always use the read address and when writing the
-write address. The write address is always one (1) more then the read address.
+write address. The write address is always one (1) more than the read address.
 
 
 uGuru ready
@@ -224,7 +224,7 @@ Bit 3: Beep if alarm							(RW)
 Bit 4: 1 if alarm cause measured temp is over the warning threshold	(R)
 Bit 5: 1 if alarm cause measured volt is over the max threshold		(R)
 Bit 6: 1 if alarm cause measured volt is under the min threshold	(R)
-Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds	(RW)
+Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds	(RW)
        Temp sensor: Shutdown if temp is over the shutdown threshold	(RW)
 
 *  This bit is only honored/used by the uGuru if a temp sensor is connected
@@ -293,7 +293,7 @@ Byte 0:
 Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
 Bit 0: Give an alarm if measured rpm is under the min threshold	(RW)
 Bit 3: Beep if alarm						(RW)
-Bit 7: Shutdown if alarm persist for more then 4 seconds	(RW)
+Bit 7: Shutdown if alarm persist for more than 4 seconds	(RW)
 
 Byte 1:
 min threshold (scale as bank 0x26)

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
@@ -1475,7 +1475,7 @@ Sysfs interface changelog:
 
 0x020100:	Marker for thinkpad-acpi with hot key NVRAM polling
 		support.  If you must, use it to know you should not
-		start an userspace NVRAM poller (allows to detect when
+		start a userspace NVRAM poller (allows to detect when
 		NVRAM is compiled out by the user because it is
 		unneeded/undesired in the first place).
 0x020101:	Marker for thinkpad-acpi with hot key NVRAM polling

diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
@@ -540,7 +540,7 @@ A client would issue an operation by:
      MSG_MORE should be set in msghdr::msg_flags on all but the last part of
      the request.  Multiple requests may be made simultaneously.
 
-     If a call is intended to go to a destination other then the default
+     If a call is intended to go to a destination other than the default
      specified through connect(), then msghdr::msg_name should be set on the
      first request message of that call.
 

diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt
@@ -118,7 +118,7 @@ As mentioned above, main purpose of TUN/TAP driver is tunneling.
 It is used by VTun (http://vtun.sourceforge.net).
 
 Another interesting application using TUN/TAP is pipsecd
-(http://perso.enst.fr/~beyssac/pipsec/), an userspace IPSec
+(http://perso.enst.fr/~beyssac/pipsec/), a userspace IPSec
 implementation that can use complete kernel routing (unlike FreeS/WAN).
 
 3. How does Virtual network device actually work ? 

diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
@@ -733,7 +733,7 @@ Changes from 20040920 to 20041018
 	  I/O completion path a little more, especially taking care of
 	  fast-pathing the non-error case.  Also removes tons of dead
 	  members and defines from lpfc_scsi.h - e.g. lpfc_target is down
-	  to nothing more then the lpfc_nodelist pointer.
+	  to nothing more than the lpfc_nodelist pointer.
 	* Added binary sysfs file to issue mbox commands
 	* Replaced #if __BIG_ENDIAN with #if __BIG_ENDIAN_BITFIELD for
 	  compatibility with the user space applications.

diff --git a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx
@@ -19,7 +19,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier ([email protected])
 
 Wed Jul 26 23:30 2000 Gerard Roudier ([email protected])
 	* version ncr53c8xx-3.4.1
-	- Provide OpenFirmare path through the proc FS on PPC.
+	- Provide OpenFirmware path through the proc FS on PPC.
 	- Remove trailing argument #2 from a couple of #undefs.
 
 Sun Jul 09 16:30 2000 Gerard Roudier ([email protected])

diff --git a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx
@@ -81,7 +81,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier ([email protected])
 
 Wed Jul 26 23:30 2000 Gerard Roudier ([email protected])
 	* version sym53c8xx-1.7.1
-	- Provide OpenFirmare path through the proc FS on PPC.
+	- Provide OpenFirmware path through the proc FS on PPC.
 	- Download of on-chip SRAM using memcpy_toio() doesn't work 
 	  on PPC. Restore previous method (MEMORY MOVE from SCRIPTS).
 	- Remove trailing argument #2 from a couple of #undefs.

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -4229,9 +4229,10 @@ L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 
 TRIVIAL PATCHES
-P:	Jesper Juhl
+P:	Jiri Kosina
 M:	[email protected]
 L:	[email protected]
+T:	git kernel.org:/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
 
 TTY LAYER

diff --git a/Makefile b/Makefile
@@ -1008,7 +1008,7 @@ define check-symlink
 endef
 
 # We create the target directory of the symlink if it does
-# not exist so the test in chack-symlink works and we have a
+# not exist so the test in check-symlink works and we have a
 # directory for generated filesas used by some architectures.
 define create-symlink
 	if [ ! -L include/asm ]; then                                      \

diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
@@ -105,7 +105,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
  * Extracts ebp, esp and eip values understandable by gdb from the values
  * saved by switch_to.
  * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp
- * prior to entering switch_to is 8 greater then the value that is saved.
+ * prior to entering switch_to is 8 greater than the value that is saved.
  * If switch_to changes, change following code appropriately.
  */
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)

diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
@@ -456,7 +456,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return -EFAULT;
 }
 
-/* Invoke a singal handler to, well, handle the signal. */
+/* Invoke a signal handler to, well, handle the signal. */
 static inline int
 handle_signal(int canrestart, unsigned long sig,
 	      siginfo_t *info, struct k_sigaction *ka,

diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
@@ -434,7 +434,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
@@ -303,7 +303,7 @@ config M68KFPU_EMU_EXTRAPREC
 	  correct rounding, the emulator can (often) do the same but this
 	  extra calculation can cost quite some time, so you can disable
 	  it here. The emulator will then "only" calculate with a 64 bit
-	  mantissa and round slightly incorrect, what is more then enough
+	  mantissa and round slightly incorrect, what is more than enough
 	  for normal usage.
 
 config M68KFPU_EMU_ONLY

diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
@@ -401,7 +401,7 @@ static inline void do_040writebacks(struct frame *fp)
  * called from sigreturn(), must ensure userspace code didn't
  * manipulate exception frame to circumvent protection, then complete
  * pending writebacks
- * we just clear TM2 to turn it into an userspace access
+ * we just clear TM2 to turn it into a userspace access
  */
 asmlinkage void berr_040cleanup(struct frame *fp)
 {

diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -148,7 +148,7 @@ int read_eeprom(char *buffer, int eeprom_size, int size)
 	send_byte(W_HEADER);
 	recv_ack();
 
-	/* EEPROM with size of more then 2K need two byte addressing */
+	/* EEPROM with size of more than 2K need two byte addressing */
 	if (eeprom_size > 2048) {
 		send_byte(0x00);
 		recv_ack();

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
@@ -208,7 +208,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 #
 # Theses are default targets to build images which embed device tree blobs.
 # They are only required on boards which do not have FDT support in firmware.
-# Boards with newish u-boot firmare can use the uImage target above
+# Boards with newish u-boot firmware can use the uImage target above
 #
 
 # Board ports in arch/powerpc/platform/40x/Kconfig

diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
@@ -317,7 +317,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:

diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -49,7 +49,7 @@ void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_rese
 	 * of precision.  This is close enough for the purpose at hand.
 	 *
 	 * The value of the timeout should be small enough that the hw
-	 * trace buffer will not get more then about 1/3 full for the
+	 * trace buffer will not get more than about 1/3 full for the
 	 * maximum user specified (the LFSR value) hw sampling frequency.
 	 * This is to ensure the trace buffer will never fill even if the
 	 * kernel thread scheduling varies under a heavy system load.

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
@@ -299,7 +299,7 @@ config WARN_STACK
 	  This option enables the compiler options -mwarn-framesize and
 	  -mwarn-dynamicstack. If the compiler supports these options it
 	  will generate warnings for function which either use alloca or
-	  create a stack frame bigger then CONFIG_WARN_STACK_SIZE.
+	  create a stack frame bigger than CONFIG_WARN_STACK_SIZE.
 
 	  Say N if you are unsure.
 

diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
@@ -382,7 +382,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:

diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c
@@ -517,7 +517,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:

diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
@@ -695,7 +695,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because multiple functions in the call path have
-	 * return probes installed on them, and/or more then one
+	 * return probes installed on them, and/or more than one
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:

diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
@@ -252,7 +252,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
 /*
  * The MFPGT timers on the CS5536 provide us with suitable timers to use
  * as clock event sources - not as good as a HPET or APIC, but certainly
- * better then the PIT.  This isn't a general purpose MFGPT driver, but
+ * better than the PIT.  This isn't a general purpose MFGPT driver, but
  * a simplified one designed specifically to act as a clock event source.
  * For full details about the MFGPT, please consult the CS5536 data sheet.
  */

diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
@@ -20,7 +20,7 @@
  *
  *
  * ACPI based HotPlug driver that supports Memory Hotplug
- * This driver fields notifications from firmare for memory add
+ * This driver fields notifications from firmware for memory add
  * and remove operations and alerts the VM of the affected memory
  * ranges.
  */

diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
@@ -404,7 +404,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Construct an union acpi_operand_object of type def_field and
+ * DESCRIPTION: Construct a union acpi_operand_object of type def_field and
  *              connect it to the parent Node.
  *
  ******************************************************************************/

diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c
@@ -146,7 +146,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
 
 	stack_desc = *stack_ptr;
 
-	/* This is an union acpi_operand_object    */
+	/* This is a union acpi_operand_object    */
 
 	switch (ACPI_GET_OBJECT_TYPE(stack_desc)) {
 	case ACPI_TYPE_LOCAL_REFERENCE:

diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c
@@ -274,7 +274,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
  *
  * PARAMETERS:  *source_desc        - Value to be stored
  *              *dest_desc          - Where to store it.  Must be an NS node
- *                                    or an union acpi_operand_object of type
+ *                                    or a union acpi_operand_object of type
  *                                    Reference;
  *              walk_state          - Current walk state
  *

diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c
@@ -124,7 +124,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
  *
  * FUNCTION:    acpi_rs_create_pci_routing_table
  *
- * PARAMETERS:  package_object          - Pointer to an union acpi_operand_object
+ * PARAMETERS:  package_object          - Pointer to a union acpi_operand_object
  *                                        package
  *              output_buffer           - Pointer to the user's buffer
  *

diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
@@ -297,7 +297,7 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size)
  *
  * RETURN:      TRUE if object is valid, FALSE otherwise
  *
- * DESCRIPTION: Validate a pointer to be an union acpi_operand_object
+ * DESCRIPTION: Validate a pointer to be a union acpi_operand_object
  *
  ******************************************************************************/
 
@@ -389,7 +389,7 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object)
 {
 	ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
 
-	/* Object must be an union acpi_operand_object    */
+	/* Object must be a union acpi_operand_object    */
 
 	if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
 		ACPI_ERROR((AE_INFO,

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
@@ -54,7 +54,7 @@ config FIRMWARE_IN_KERNEL
 	  such firmware, and do not wish to use an initrd.
 
 	  This single option controls the inclusion of firmware for
-	  every driver which uses request_firmare() and ships its
+	  every driver which uses request_firmware() and ships its
 	  firmware in the kernel source tree, to avoid a proliferation
 	  of 'Include firmware for xxx device' options.
 

diff --git a/drivers/char/epca.c b/drivers/char/epca.c
@@ -769,7 +769,7 @@ static int pc_open(struct tty_struct *tty, struct file *filp)
 	/* Check status of board configured in system.  */
 
 	/*
-	 * I check to see if the epca_setup routine detected an user error. It
+	 * I check to see if the epca_setup routine detected a user error. It
 	 * might be better to put this in pc_init, but for the moment it goes
 	 * here.
 	 */

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
@@ -83,7 +83,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
 	select CPU_FREQ_GOV_USERSPACE
 	help
 	  Use the CPUFreq governor 'userspace' as default. This allows
-	  you to set the CPU frequency manually or when an userspace 
+	  you to set the CPU frequency manually or when a userspace 
 	  program shall be able to set the CPU dynamically without having
 	  to enable the userspace governor manually.
 
@@ -138,7 +138,7 @@ config CPU_FREQ_GOV_USERSPACE
 	tristate "'userspace' governor for userspace frequency scaling"
 	help
 	  Enable this cpufreq governor when you either want to set the
-	  CPU frequency manually or when an userspace program shall
+	  CPU frequency manually or when a userspace program shall
 	  be able to set the CPU dynamically, like on LART 
 	  <http://www.lartmaker.nl/>.
 

diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
@@ -75,7 +75,7 @@ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
 
 /* minimum pwm at which the fan is driven (pwm can by increased depending on
    the temp. Notice that for the scy some fans share there minimum speed.
-   Also notice that with the scy the sensor order is different then with the
+   Also notice that with the scy the sensor order is different than with the
    other chips, this order was in the 2.4 driver and kept for consistency. */
 static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
 	{ 0x55, 0x65 },					/* pos */

diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
@@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
 		if (err)
 			goto out;
 	} else {
-		/* Can't be smaller then the number of outstanding CQEs */
+		/* Can't be smaller than the number of outstanding CQEs */
 		outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
 		if (entries < outst_cqe + 1) {
 			err = 0;

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
@@ -65,7 +65,7 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and
 
 /*
  * Scancode to keycode tables. These are just the default setting, and
- * are loadable via an userland utility.
+ * are loadable via a userland utility.
  */
 
 static const unsigned short atkbd_set2_keycode[512] = {

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
@@ -138,7 +138,7 @@ config PMAC_BACKLIGHT
 	  Say Y here to enable Macintosh specific extensions of the generic
 	  backlight code. With this enabled, the brightness keys on older
 	  PowerBooks will be enabled so you can change the screen brightness.
-	  Newer models should use an userspace daemon like pbbuttonsd.
+	  Newer models should use a userspace daemon like pbbuttonsd.
 
 config PMAC_BACKLIGHT_LEGACY
 	bool "Provide legacy ioctl's on /dev/pmu for the backlight"

diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
@@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
  *	@i2o_dev: the I2O device which was added
  *
  *	If a I2O device is added we catch the notification, because I2O classes
- *	other then SCSI peripheral will not be received through
+ *	other than SCSI peripheral will not be received through
  *	i2o_scsi_probe().
  */
 static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)