Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Changes included in this pull request:

   - revert pxa2xx-flash back to using ioremap_cached() and switch
     memremap() to use arch_memremap_wb()

   - remove pci=firmware command line argument handling

   - remove unnecessary arm_dma_set_mask() implementation, the generic
     implementation will do for ARM

   - removal of the ARM kallsyms "hack" to work around mode switching
     veneers and vectors located below PAGE_OFFSET

   - tidy up build system output a little

   - add L2 cache power management DT bindings

   - remove duplicated local_irq_disable() in reboot paths

   - handle AMBA primecell devices better at registration time with PM
     domains (needed for Samsung SoCs)

   - ARM specific preparation to support Keystone II kexec"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8567/1: cache-uniphier: activate ways for secondary CPUs
  ARM: 8570/2: Documentation: devicetree: Add PL310 PM bindings
  ARM: 8569/1: pl2x0: Add OF control of cache power management
  ARM: 8568/1: reboot: remove duplicated local_irq_disable()
  ARM: 8566/1: drivers: amba: properly handle devices with power domains
  ARM: provide arm_has_idmap_alias() helper
  ARM: kexec: remove 512MB restriction on kexec crashdump
  ARM: provide improved virt_to_idmap() functionality
  ARM: kexec: fix crashkernel= handling
  ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets
  ARM: 8562/1: suppress "include/generated/mach-types.h is up to date."
  ARM: 8553/1: kallsyms: remove --page-offset command line option
  ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM
  ARM: 8555/1: kallsyms: ignore ARM mode switching veneers
  ARM: 8548/1: dma-mapping: remove arm_dma_set_mask()
  ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling
  ARM: memremap: implement arch_memremap_wb()
  memremap: add arch specific hook for MEMREMAP_WB mappings
  mtd: pxa2xx-flash: switch back from memremap to ioremap_cached
  ARM: reintroduce ioremap_cached() for creating cached I/O mappings

Documentation/devicetree/bindings/arm/l2c2x0.txt

@@ -84,6 +84,12 @@ Optional properties:
 - prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
   <1> (forcibly enable), property absent (retain settings set by
   firmware)
+- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
+  disable), <1> (forcibly enable), property absent (OS specific behavior,
+  preferrably retain firmware settings)
+- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
+  <1> (forcibly enable), property absent (OS specific behavior,
+  preferrably retain firmware settings)
 
 Example:
 

Documentation/kdump/kdump.txt

@@ -263,12 +263,6 @@ The syntax is:
     crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
     range=start-[end]
 
-Please note, on arm, the offset is required.
-    crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset
-    range=start-[end]
-
-    'start' is inclusive and 'end' is exclusive.
-
 For example:
 
     crashkernel=512M-2G:64M,2G-:128M
@@ -307,10 +301,9 @@ Boot into System Kernel
    on the memory consumption of the kdump system. In general this is not
    dependent on the memory size of the production system.
 
-   On arm, use "crashkernel=Y@X". Note that the start address of the kernel
-   will be aligned to 128MiB (0x08000000), so if the start address is not then
-   any space below the alignment point may be overwritten by the dump-capture kernel,
-   which means it is possible that the vmcore is not that precise as expected.
+   On arm, the use of "crashkernel=Y@X" is no longer necessary; the
+   kernel will automatically locate the crash kernel image within the
+   first 512MB of RAM if X is not given.
 
 
 Load the Dump-capture Kernel

Documentation/kernel-parameters.txt

@@ -2959,11 +2959,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				for broken drivers that don't call it.
 		skip_isa_align	[X86] do not align io start addr, so can
 				handle more pci cards
-		firmware	[ARM] Do not re-enumerate the bus but instead
-				just use the configuration from the
-				bootloader. This is currently used on
-				IXP2000 systems where the bus has to be
-				configured a certain way for adjunct CPUs.
 		noearly		[X86] Don't do any early type 1 scanning.
 				This might help on some broken boards which
 				machine check when some devices' config space

arch/arm/boot/Makefile

@@ -88,7 +88,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 	@$(kecho) '  Kernel: $@ is ready'
 
-PHONY += initrd
+PHONY += initrd install zinstall uinstall
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)

arch/arm/include/asm/dma-mapping.h

@@ -162,8 +162,6 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 
 static inline void dma_mark_clean(void *addr, size_t size) { }
 
-extern int arm_dma_set_mask(struct device *dev, u64 dma_mask);
-
 /**
  * arm_dma_alloc - allocate consistent memory for DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices

arch/arm/include/asm/io.h

@@ -392,16 +392,28 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size);
 #define ioremap ioremap
 #define ioremap_nocache ioremap
 
+/*
+ * Do not use ioremap_cache for mapping memory. Use memremap instead.
+ */
 void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size);
 #define ioremap_cache ioremap_cache
 
+/*
+ * Do not use ioremap_cached in new code. Provided for the benefit of
+ * the pxa2xx-flash MTD driver only.
+ */
+void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size);
+
 void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
 #define ioremap_wc ioremap_wc
 #define ioremap_wt ioremap_wc
 
 void iounmap(volatile void __iomem *iomem_cookie);
 #define iounmap iounmap
 
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size);
+#define arch_memremap_wb arch_memremap_wb
+
 /*
  * io{read,write}{16,32}be() macros
  */

arch/arm/include/asm/memory.h

@@ -288,19 +288,43 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)
 
-extern unsigned long (*arch_virt_to_idmap)(unsigned long x);
+extern long long arch_phys_to_idmap_offset;
 
 /*
- * These are for systems that have a hardware interconnect supported alias of
- * physical memory for idmap purposes.  Most cases should leave these
+ * These are for systems that have a hardware interconnect supported alias
+ * of physical memory for idmap purposes.  Most cases should leave these
  * untouched.  Note: this can only return addresses less than 4GiB.
  */
+static inline bool arm_has_idmap_alias(void)
+{
+	return IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset != 0;
+}
+
+#define IDMAP_INVALID_ADDR ((u32)~0)
+
+static inline unsigned long phys_to_idmap(phys_addr_t addr)
+{
+	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset) {
+		addr += arch_phys_to_idmap_offset;
+		if (addr > (u32)~0)
+			addr = IDMAP_INVALID_ADDR;
+	}
+	return addr;
+}
+
+static inline phys_addr_t idmap_to_phys(unsigned long idmap)
+{
+	phys_addr_t addr = idmap;
+
+	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset)
+		addr -= arch_phys_to_idmap_offset;
+
+	return addr;
+}
+
 static inline unsigned long __virt_to_idmap(unsigned long x)
 {
-	if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
-		return arch_virt_to_idmap(x);
-	else
-		return __virt_to_phys(x);
+	return phys_to_idmap(__virt_to_phys(x));
 }
 
 #define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))

arch/arm/kernel/bios32.c

@@ -550,9 +550,6 @@ char * __init pcibios_setup(char *str)
 	if (!strcmp(str, "debug")) {
 		debug_pci = 1;
 		return NULL;
-	} else if (!strcmp(str, "firmware")) {
-		pci_add_flags(PCI_PROBE_ONLY);
-		return NULL;
 	}
 	return str;
 }

arch/arm/kernel/reboot.c

@@ -104,8 +104,6 @@ void machine_halt(void)
 {
 	local_irq_disable();
 	smp_send_stop();
-
-	local_irq_disable();
 	while (1);
 }
 
@@ -150,6 +148,5 @@ void machine_restart(char *cmd)
 
 	/* Whoops - the platform was unable to reboot. Tell the user! */
 	printk("Reboot failed -- System halted\n");
-	local_irq_disable();
 	while (1);
 }

arch/arm/kernel/setup.c

@@ -941,6 +941,12 @@ static int __init init_machine_late(void)
 late_initcall(init_machine_late);
 
 #ifdef CONFIG_KEXEC
+/*
+ * The crash region must be aligned to 128MB to avoid
+ * zImage relocating below the reserved region.
+ */
+#define CRASH_ALIGN	(128 << 20)
+
 static inline unsigned long long get_total_mem(void)
 {
 	unsigned long total;
@@ -968,6 +974,26 @@ static void __init reserve_crashkernel(void)
 	if (ret)
 		return;
 
+	if (crash_base <= 0) {
+		unsigned long long crash_max = idmap_to_phys((u32)~0);
+		crash_base = memblock_find_in_range(CRASH_ALIGN, crash_max,
+						    crash_size, CRASH_ALIGN);
+		if (!crash_base) {
+			pr_err("crashkernel reservation failed - No suitable area found.\n");
+			return;
+		}
+	} else {
+		unsigned long long start;
+
+		start = memblock_find_in_range(crash_base,
+					       crash_base + crash_size,
+					       crash_size, SECTION_SIZE);
+		if (start != crash_base) {
+			pr_err("crashkernel reservation failed - memory is in use.\n");
+			return;
+		}
+	}
+
 	ret = memblock_reserve(crash_base, crash_size);
 	if (ret < 0) {
 		pr_warn("crashkernel reservation failed - memory is in use (0x%lx)\n",

arch/arm/mach-keystone/keystone.c

@@ -63,11 +63,6 @@ static void __init keystone_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static unsigned long keystone_virt_to_idmap(unsigned long x)
-{
-	return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START;
-}
-
 static long long __init keystone_pv_fixup(void)
 {
 	long long offset;
@@ -91,7 +86,7 @@ static long long __init keystone_pv_fixup(void)
 	offset = KEYSTONE_HIGH_PHYS_START - KEYSTONE_LOW_PHYS_START;
 
 	/* Populate the arch idmap hook */
-	arch_virt_to_idmap = keystone_virt_to_idmap;
+	arch_phys_to_idmap_offset = -offset;
 
 	return offset;
 }

arch/arm/mm/cache-l2x0.c

@@ -647,11 +647,6 @@ static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
 		aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP);
 	}
 
-	/* r3p0 or later has power control register */
-	if (rev >= L310_CACHE_ID_RTL_R3P0)
-		l2x0_saved_regs.pwr_ctrl = L310_DYNAMIC_CLK_GATING_EN |
-						L310_STNDBY_MODE_EN;
-
 	/*
 	 * Always enable non-secure access to the lockdown registers -
 	 * we write to them as part of the L2C enable sequence so they
@@ -1141,6 +1136,7 @@ static void __init l2c310_of_parse(const struct device_node *np,
 	u32 filter[2] = { 0, 0 };
 	u32 assoc;
 	u32 prefetch;
+	u32 power;
 	u32 val;
 	int ret;
 
@@ -1271,6 +1267,26 @@ static void __init l2c310_of_parse(const struct device_node *np,
 	}
 
 	l2x0_saved_regs.prefetch_ctrl = prefetch;
+
+	power = l2x0_saved_regs.pwr_ctrl |
+		L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN;
+
+	ret = of_property_read_u32(np, "arm,dynamic-clock-gating", &val);
+	if (!ret) {
+		if (!val)
+			power &= ~L310_DYNAMIC_CLK_GATING_EN;
+	} else if (ret != -EINVAL) {
+		pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n");
+	}
+	ret = of_property_read_u32(np, "arm,standby-mode", &val);
+	if (!ret) {
+		if (!val)
+			power &= ~L310_STNDBY_MODE_EN;
+	} else if (ret != -EINVAL) {
+		pr_err("L2C-310 OF standby-mode property value is missing or invalid\n");
+	}
+
+	l2x0_saved_regs.pwr_ctrl = power;
 }
 
 static const struct l2c_init_data of_l2c310_data __initconst = {

arch/arm/mm/cache-uniphier.c

@@ -96,6 +96,7 @@ struct uniphier_cache_data {
 	void __iomem *ctrl_base;
 	void __iomem *rev_base;
 	void __iomem *op_base;
+	void __iomem *way_ctrl_base;
 	u32 way_present_mask;
 	u32 way_locked_mask;
 	u32 nsets;
@@ -256,10 +257,13 @@ static void __init __uniphier_cache_set_locked_ways(
 					struct uniphier_cache_data *data,
 					u32 way_mask)
 {
+	unsigned int cpu;
+
 	data->way_locked_mask = way_mask & data->way_present_mask;
 
-	writel_relaxed(~data->way_locked_mask & data->way_present_mask,
-		       data->ctrl_base + UNIPHIER_SSCLPDAWCR);
+	for_each_possible_cpu(cpu)
+		writel_relaxed(~data->way_locked_mask & data->way_present_mask,
+			       data->way_ctrl_base + 4 * cpu);
 }
 
 static void uniphier_cache_maint_range(unsigned long start, unsigned long end,
@@ -459,6 +463,8 @@ static int __init __uniphier_cache_init(struct device_node *np,
 		goto err;
 	}
 
+	data->way_ctrl_base = data->ctrl_base + 0xc00;
+
 	if (*cache_level == 2) {
 		u32 revision = readl(data->rev_base + UNIPHIER_SSCID);
 		/*
@@ -467,6 +473,22 @@ static int __init __uniphier_cache_init(struct device_node *np,
 		 */
 		if (revision <= 0x16)
 			data->range_op_max_size = (u32)1 << 22;
+
+		/*
+		 * Unfortunatly, the offset address of active way control base
+		 * varies from SoC to SoC.
+		 */
+		switch (revision) {
+		case 0x11:	/* sLD3 */
+			data->way_ctrl_base = data->ctrl_base + 0x870;
+			break;
+		case 0x12:	/* LD4 */
+		case 0x16:	/* sld8 */
+			data->way_ctrl_base = data->ctrl_base + 0x840;
+			break;
+		default:
+			break;
+		}
 	}
 
 	data->range_op_max_size -= data->line_size;

arch/arm/mm/dma-mapping.c

@@ -190,7 +190,6 @@ struct dma_map_ops arm_dma_ops = {
 	.sync_single_for_device	= arm_dma_sync_single_for_device,
 	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
 	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
-	.set_dma_mask		= arm_dma_set_mask,
 };
 EXPORT_SYMBOL(arm_dma_ops);
 
@@ -209,7 +208,6 @@ struct dma_map_ops arm_coherent_dma_ops = {
 	.get_sgtable		= arm_dma_get_sgtable,
 	.map_page		= arm_coherent_dma_map_page,
 	.map_sg			= arm_dma_map_sg,
-	.set_dma_mask		= arm_dma_set_mask,
 };
 EXPORT_SYMBOL(arm_coherent_dma_ops);
 
@@ -1143,16 +1141,6 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-int arm_dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
 #define PREALLOC_DMA_DEBUG_ENTRIES	4096
 
 static int __init dma_debug_do_init(void)
@@ -2006,8 +1994,6 @@ struct dma_map_ops iommu_ops = {
 	.unmap_sg		= arm_iommu_unmap_sg,
 	.sync_sg_for_cpu	= arm_iommu_sync_sg_for_cpu,
 	.sync_sg_for_device	= arm_iommu_sync_sg_for_device,
-
-	.set_dma_mask		= arm_dma_set_mask,
 };
 
 struct dma_map_ops iommu_coherent_ops = {
@@ -2021,8 +2007,6 @@ struct dma_map_ops iommu_coherent_ops = {
 
 	.map_sg		= arm_coherent_iommu_map_sg,
 	.unmap_sg	= arm_coherent_iommu_unmap_sg,
-
-	.set_dma_mask	= arm_dma_set_mask,
 };
 
 /**

arch/arm/mm/idmap.c

@@ -15,7 +15,7 @@
  * page tables.
  */
 pgd_t *idmap_pgd;
-unsigned long (*arch_virt_to_idmap)(unsigned long x);
+long long arch_phys_to_idmap_offset;
 
 #ifdef CONFIG_ARM_LPAE
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,