Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
kyagi · May 2, 2013 · a772635 · a772635
2 parents 4d26aa3 + afcf792
commit a772635
Show file tree

Hide file tree

Showing 263 changed files with 2,919 additions and 6,559 deletions.
diff --git a/...terrupt-controller/allwinner,sunxi-ic.txt → ...terrupt-controller/allwinner,sun4i-ic.txt b/...terrupt-controller/allwinner,sunxi-ic.txt → ...terrupt-controller/allwinner,sun4i-ic.txt
@@ -2,7 +2,7 @@ Allwinner Sunxi Interrupt Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-ic"
+- compatible : should be "allwinner,sun4i-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -97,7 +97,7 @@ The interrupt sources are as follows:
 Example:
 
 intc: interrupt-controller {
-	compatible = "allwinner,sunxi-ic";
+	compatible = "allwinner,sun4i-ic";
 	reg = <0x01c20400 0x400>;
 	interrupt-controller;
 	#interrupt-cells = <2>;

diff --git a/.../bindings/timer/allwinner,sunxi-timer.txt → .../bindings/timer/allwinner,sun4i-timer.txt b/.../bindings/timer/allwinner,sunxi-timer.txt → .../bindings/timer/allwinner,sun4i-timer.txt
@@ -2,15 +2,15 @@ Allwinner A1X SoCs Timer Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-timer"
+- compatible : should be "allwinner,sun4i-timer"
 - reg : Specifies base physical address and size of the registers.
 - interrupts : The interrupt of the first timer
 - clocks: phandle to the source clock (usually a 24 MHz fixed clock)
 
 Example:
 
 timer {
-	compatible = "allwinner,sunxi-timer";
+	compatible = "allwinner,sun4i-timer";
 	reg = <0x01c20c00 0x400>;
 	interrupts = <22>;
 	clocks = <&osc>;

diff --git a/...evicetree/bindings/watchdog/sunxi-wdt.txt → ...evicetree/bindings/watchdog/sun4i-wdt.txt b/...evicetree/bindings/watchdog/sunxi-wdt.txt → ...evicetree/bindings/watchdog/sun4i-wdt.txt
@@ -1,13 +1,13 @@
-Allwinner sunXi Watchdog timer
+Allwinner sun4i Watchdog timer
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-wdt"
+- compatible : should be "allwinner,sun4i-wdt"
 - reg : Specifies base physical address and size of the registers.
 
 Example:
 
 wdt: watchdog@01c20c90 {
-	compatible = "allwinner,sunxi-wdt";
+	compatible = "allwinner,sun4i-wdt";
 	reg = <0x01c20c90 0x10>;
 };
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
@@ -411,6 +411,7 @@ config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_GPIO_H
 	select CPU_FA526
 	help
 	  Support for the Cortina Systems Gemini family SoCs
@@ -474,12 +475,14 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select SPARSE_IRQ
+	select STMP_DEVICE
 	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
@@ -493,14 +496,6 @@ config ARCH_NETX
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
-config ARCH_H720X
-	bool "Hynix HMS720x-based"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_ARM720T
-	select ISA_DMA_API
-	help
-	  This enables support for systems based on the Hynix HMS720x
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -1054,8 +1049,6 @@ source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
-
 source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
@@ -1176,7 +1169,6 @@ config PLAT_VERSATILE
 config ARM_TIMER_SP804
 	bool
 	select CLKSRC_MMIO
-	select HAVE_SCHED_CLOCK
 
 source arch/arm/mm/Kconfig
 
@@ -1606,6 +1598,7 @@ config HAVE_ARM_ARCH_TIMER
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
+	select CLKSRC_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 
@@ -2165,13 +2158,6 @@ menu "CPU Power Management"
 if ARCH_HAS_CPUFREQ
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_MXC && CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
 config CPU_FREQ_S3C
 	bool
 	help

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
@@ -147,7 +147,6 @@ machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
-machine-$(CONFIG_ARCH_H720X)		+= h720x
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
 machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
@@ -295,6 +295,7 @@
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
 				reg = <0x8001c000 2000>;
 				status = "disabled";
 			};
@@ -321,6 +322,7 @@
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -360,7 +362,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl";
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -426,6 +428,7 @@
 				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
 			};
 
 			auart0: serial@8006c000 {

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
@@ -647,6 +647,7 @@
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx28-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
@@ -676,6 +677,7 @@
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -755,7 +757,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl";
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -838,6 +840,7 @@
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
 			};
 
 			auart0: serial@8006a000 {

diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
@@ -99,7 +99,7 @@
 	};
 
 	pmc {
-		compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc";
+		compatible = "nvidia,tegra114-pmc";
 		reg = <0x7000e400 0x400>;
 	};
 

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
@@ -145,6 +145,7 @@
 			      0 1 0x04
 			      0 41 0x04
 			      0 42 0x04>;
+		clocks = <&tegra_car 5>;
 	};
 
 	tegra_car: clock {
@@ -304,6 +305,7 @@
 		compatible = "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <0 2 0x04>;
+		clocks = <&tegra_car 4>;
 	};
 
 	i2c@7000c000 {

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
@@ -148,6 +148,7 @@
 			      0 42 0x04
 			      0 121 0x04
 			      0 122 0x04>;
+		clocks = <&tegra_car 5>;
 	};
 
 	tegra_car: clock {
@@ -291,6 +292,7 @@
 		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <0 2 0x04>;
+		clocks = <&tegra_car 4>;
 	};
 
 	i2c@7000c000 {
@@ -423,7 +425,7 @@
 	};
 
 	pmc {
-		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+		compatible = "nvidia,tegra30-pmc";
 		reg = <0x7000e400 0x400>;
 	};
 

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
@@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
 CONFIG_AEABI=y

diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig
@@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y
 CONFIG_MACH_CPU9260=y
 CONFIG_MACH_FLEXIBITY=y
 CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0

diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
@@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y
 CONFIG_MACH_GSIA18S=y
 CONFIG_MACH_USB_A9G20=y
 CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y

diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
@@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y

diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
@@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
+#endif
+
 #endif
 
 #endif
-Original file line number
+Diff line change
@@ Expand Up / @@ -99,7 +99,7 @@ @@
     	};
     	pmc {
-    		compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc";
+    		compatible = "nvidia,tegra114-pmc";
     		reg = <0x7000e400 0x400>;
     	};
@@ Expand Down @@