Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless into for-davem

drivers/bcma/bcma_private.h

@@ -94,11 +94,16 @@ void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
 #ifdef CONFIG_BCMA_DRIVER_GPIO
 /* driver_gpio.c */
 int bcma_gpio_init(struct bcma_drv_cc *cc);
+int bcma_gpio_unregister(struct bcma_drv_cc *cc);
 #else
 static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
 {
 	return -ENOTSUPP;
 }
+static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+{
+	return 0;
+}
 #endif /* CONFIG_BCMA_DRIVER_GPIO */
 
 #endif

drivers/bcma/driver_gpio.c

@@ -96,3 +96,8 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
 
 	return gpiochip_add(chip);
 }
+
+int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+{
+	return gpiochip_remove(&cc->gpio);
+}

drivers/bcma/main.c

@@ -268,6 +268,13 @@ int bcma_bus_register(struct bcma_bus *bus)
 void bcma_bus_unregister(struct bcma_bus *bus)
 {
 	struct bcma_device *cores[3];
+	int err;
+
+	err = bcma_gpio_unregister(&bus->drv_cc);
+	if (err == -EBUSY)
+		bcma_err(bus, "Some GPIOs are still in use.\n");
+	else if (err)
+		bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
 
 	cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
 	cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);

drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

@@ -36,6 +36,7 @@
 #include "debug.h"
 
 #define N_TX_QUEUES	4 /* #tx queues on mac80211<->driver interface */
+#define BRCMS_FLUSH_TIMEOUT	500 /* msec */
 
 /* Flags we support */
 #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
@@ -708,16 +709,29 @@ static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
 }
 
+static bool brcms_tx_flush_completed(struct brcms_info *wl)
+{
+	bool result;
+
+	spin_lock_bh(&wl->lock);
+	result = brcms_c_tx_flush_completed(wl->wlc);
+	spin_unlock_bh(&wl->lock);
+	return result;
+}
+
 static void brcms_ops_flush(struct ieee80211_hw *hw, bool drop)
 {
 	struct brcms_info *wl = hw->priv;
+	int ret;
 
 	no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
 
-	/* wait for packet queue and dma fifos to run empty */
-	spin_lock_bh(&wl->lock);
-	brcms_c_wait_for_tx_completion(wl->wlc, drop);
-	spin_unlock_bh(&wl->lock);
+	ret = wait_event_timeout(wl->tx_flush_wq,
+				 brcms_tx_flush_completed(wl),
+				 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
+
+	brcms_dbg_mac80211(wl->wlc->hw->d11core,
+			   "ret=%d\n", jiffies_to_msecs(ret));
 }
 
 static const struct ieee80211_ops brcms_ops = {
@@ -772,6 +786,7 @@ void brcms_dpc(unsigned long data)
 
  done:
 	spin_unlock_bh(&wl->lock);
+	wake_up(&wl->tx_flush_wq);
 }
 
 /*
@@ -1020,6 +1035,8 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev)
 
 	atomic_set(&wl->callbacks, 0);
 
+	init_waitqueue_head(&wl->tx_flush_wq);
+
 	/* setup the bottom half handler */
 	tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
 
@@ -1609,13 +1626,3 @@ bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
 	spin_lock_bh(&wl->lock);
 	return blocked;
 }
-
-/*
- * precondition: perimeter lock has been acquired
- */
-void brcms_msleep(struct brcms_info *wl, uint ms)
-{
-	spin_unlock_bh(&wl->lock);
-	msleep(ms);
-	spin_lock_bh(&wl->lock);
-}

drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h

@@ -68,6 +68,8 @@ struct brcms_info {
 	spinlock_t lock;	/* per-device perimeter lock */
 	spinlock_t isr_lock;	/* per-device ISR synchronization lock */
 
+	/* tx flush */
+	wait_queue_head_t tx_flush_wq;
 
 	/* timer related fields */
 	atomic_t callbacks;	/* # outstanding callback functions */
@@ -100,7 +102,6 @@ extern struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
 extern void brcms_free_timer(struct brcms_timer *timer);
 extern void brcms_add_timer(struct brcms_timer *timer, uint ms, int periodic);
 extern bool brcms_del_timer(struct brcms_timer *timer);
-extern void brcms_msleep(struct brcms_info *wl, uint ms);
 extern void brcms_dpc(unsigned long data);
 extern void brcms_timer(struct brcms_timer *t);
 extern void brcms_fatal_error(struct brcms_info *wl);

drivers/net/wireless/brcm80211/brcmsmac/main.c

@@ -7511,25 +7511,16 @@ int brcms_c_get_curband(struct brcms_c_info *wlc)
 	return wlc->band->bandunit;
 }
 
-void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc, bool drop)
+bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc)
 {
-	int timeout = 20;
 	int i;
 
 	/* Kick DMA to send any pending AMPDU */
 	for (i = 0; i < ARRAY_SIZE(wlc->hw->di); i++)
 		if (wlc->hw->di[i])
-			dma_txflush(wlc->hw->di[i]);
+			dma_kick_tx(wlc->hw->di[i]);
 
-	/* wait for queue and DMA fifos to run dry */
-	while (brcms_txpktpendtot(wlc) > 0) {
-		brcms_msleep(wlc->wl, 1);
-
-		if (--timeout == 0)
-			break;
-	}
-
-	WARN_ON_ONCE(timeout == 0);
+	return !brcms_txpktpendtot(wlc);
 }
 
 void brcms_c_set_beacon_listen_interval(struct brcms_c_info *wlc, u8 interval)

drivers/net/wireless/brcm80211/brcmsmac/pub.h

@@ -314,8 +314,6 @@ extern void brcms_c_associate_upd(struct brcms_c_info *wlc, bool state);
 extern void brcms_c_scan_start(struct brcms_c_info *wlc);
 extern void brcms_c_scan_stop(struct brcms_c_info *wlc);
 extern int brcms_c_get_curband(struct brcms_c_info *wlc);
-extern void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc,
-					   bool drop);
 extern int brcms_c_set_channel(struct brcms_c_info *wlc, u16 channel);
 extern int brcms_c_set_rate_limit(struct brcms_c_info *wlc, u16 srl, u16 lrl);
 extern void brcms_c_get_current_rateset(struct brcms_c_info *wlc,
@@ -332,5 +330,6 @@ extern int brcms_c_set_tx_power(struct brcms_c_info *wlc, int txpwr);
 extern int brcms_c_get_tx_power(struct brcms_c_info *wlc);
 extern bool brcms_c_check_radio_disabled(struct brcms_c_info *wlc);
 extern void brcms_c_mute(struct brcms_c_info *wlc, bool on);
+extern bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc);
 
 #endif				/* _BRCM_PUB_H_ */

drivers/net/wireless/rtlwifi/base.c

@@ -1004,7 +1004,8 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 					 is_tx ? "Tx" : "Rx");
 
 				if (is_tx) {
-					rtl_lps_leave(hw);
+					schedule_work(&rtlpriv->
+						      works.lps_leave_work);
 					ppsc->last_delaylps_stamp_jiffies =
 					    jiffies;
 				}
@@ -1014,7 +1015,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 		}
 	} else if (ETH_P_ARP == ether_type) {
 		if (is_tx) {
-			rtl_lps_leave(hw);
+			schedule_work(&rtlpriv->works.lps_leave_work);
 			ppsc->last_delaylps_stamp_jiffies = jiffies;
 		}
 
@@ -1024,7 +1025,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 			 "802.1X %s EAPOL pkt!!\n", is_tx ? "Tx" : "Rx");
 
 		if (is_tx) {
-			rtl_lps_leave(hw);
+			schedule_work(&rtlpriv->works.lps_leave_work);
 			ppsc->last_delaylps_stamp_jiffies = jiffies;
 		}
 

drivers/ssb/driver_gpio.c

@@ -174,3 +174,15 @@ int ssb_gpio_init(struct ssb_bus *bus)
 
 	return -1;
 }
+
+int ssb_gpio_unregister(struct ssb_bus *bus)
+{
+	if (ssb_chipco_available(&bus->chipco) ||
+	    ssb_extif_available(&bus->extif)) {
+		return gpiochip_remove(&bus->gpio);
+	} else {
+		SSB_WARN_ON(1);
+	}
+
+	return -1;
+}

drivers/ssb/main.c

@@ -443,6 +443,15 @@ static void ssb_devices_unregister(struct ssb_bus *bus)
 
 void ssb_bus_unregister(struct ssb_bus *bus)
 {
+	int err;
+
+	err = ssb_gpio_unregister(bus);
+	if (err == -EBUSY)
+		ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n");
+	else if (err)
+		ssb_dprintk(KERN_ERR PFX
+			    "Can not unregister GPIO driver: %i\n", err);
+
 	ssb_buses_lock();
 	ssb_devices_unregister(bus);
 	list_del(&bus->list);

drivers/ssb/ssb_private.h

@@ -252,11 +252,16 @@ static inline void ssb_extif_init(struct ssb_extif *extif)
 
 #ifdef CONFIG_SSB_DRIVER_GPIO
 extern int ssb_gpio_init(struct ssb_bus *bus);
+extern int ssb_gpio_unregister(struct ssb_bus *bus);
 #else /* CONFIG_SSB_DRIVER_GPIO */
 static inline int ssb_gpio_init(struct ssb_bus *bus)
 {
 	return -ENOTSUPP;
 }
+static inline int ssb_gpio_unregister(struct ssb_bus *bus)
+{
+	return 0;
+}
 #endif /* CONFIG_SSB_DRIVER_GPIO */
 
 #endif /* LINUX_SSB_PRIVATE_H_ */

net/bluetooth/hci_conn.c

@@ -249,12 +249,12 @@ static void hci_conn_disconnect(struct hci_conn *conn)
 	__u8 reason = hci_proto_disconn_ind(conn);
 
 	switch (conn->type) {
-	case ACL_LINK:
-		hci_acl_disconn(conn, reason);
-		break;
 	case AMP_LINK:
 		hci_amp_disconn(conn, reason);
 		break;
+	default:
+		hci_acl_disconn(conn, reason);
+		break;
 	}
 }
 

net/bluetooth/smp.c

@@ -859,6 +859,19 @@ int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb)
 
 	skb_pull(skb, sizeof(code));
 
+	/*
+	 * The SMP context must be initialized for all other PDUs except
+	 * pairing and security requests. If we get any other PDU when
+	 * not initialized simply disconnect (done if this function
+	 * returns an error).
+	 */
+	if (code != SMP_CMD_PAIRING_REQ && code != SMP_CMD_SECURITY_REQ &&
+	    !conn->smp_chan) {
+		BT_ERR("Unexpected SMP command 0x%02x. Disconnecting.", code);
+		kfree_skb(skb);
+		return -ENOTSUPP;
+	}
+
 	switch (code) {
 	case SMP_CMD_PAIRING_REQ:
 		reason = smp_cmd_pairing_req(conn, skb);