Merge branch 'for-next' of git://git.o-hand.com/linux-mfd

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: Fix twl4030-core build
  mfd: Ensure sm501 GPIO pin mode is GPIO when configured
  mfd: dm355 evm MMC/SD card detection
  regulator: PCF50633 pmic driver
  input: PCF50633 input driver
  power_supply: PCF50633 battery charger driver
  rtc: PCF50633 rtc driver
  mfd: PCF50633 gpio support
  mfd: PCF50633 adc driver
  mfd: PCF50633 core driver

drivers/input/misc/Kconfig

@@ -220,4 +220,11 @@ config HP_SDC_RTC
 	  Say Y here if you want to support the built-in real time clock
 	  of the HP SDC controller.
 
+config INPUT_PCF50633_PMU
+	tristate "PCF50633 PMU events"
+	depends on MFD_PCF50633
+	help
+	 Say Y to include support for delivering  PMU events via  input
+	 layer on NXP PCF50633.
+
 endif

drivers/input/misc/Makefile

@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
+obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o

drivers/input/misc/pcf50633-input.c

@@ -0,0 +1,132 @@
+/* NXP PCF50633 Input Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <[email protected]>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+#define PCF50633_OOCSTAT_ONKEY	0x01
+#define PCF50633_REG_OOCSTAT	0x12
+#define PCF50633_REG_OOCMODE	0x10
+
+struct pcf50633_input {
+	struct pcf50633 *pcf;
+	struct input_dev *input_dev;
+};
+
+static void
+pcf50633_input_irq(int irq, void *data)
+{
+	struct pcf50633_input *input;
+	int onkey_released;
+
+	input = data;
+
+	/* We report only one event depending on the key press status */
+	onkey_released = pcf50633_reg_read(input->pcf, PCF50633_REG_OOCSTAT)
+						& PCF50633_OOCSTAT_ONKEY;
+
+	if (irq == PCF50633_IRQ_ONKEYF && !onkey_released)
+		input_report_key(input->input_dev, KEY_POWER, 1);
+	else if (irq == PCF50633_IRQ_ONKEYR && onkey_released)
+		input_report_key(input->input_dev, KEY_POWER, 0);
+
+	input_sync(input->input_dev);
+}
+
+static int __devinit pcf50633_input_probe(struct platform_device *pdev)
+{
+	struct pcf50633_input *input;
+	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
+	struct input_dev *input_dev;
+	int ret;
+
+
+	input = kzalloc(sizeof(*input), GFP_KERNEL);
+	if (!input)
+		return -ENOMEM;
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		kfree(input);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, input);
+	input->pcf = pdata->pcf;
+	input->input_dev = input_dev;
+
+	input_dev->name = "PCF50633 PMU events";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR);
+	set_bit(KEY_POWER, input_dev->keybit);
+
+	ret = input_register_device(input_dev);
+	if (ret) {
+		input_free_device(input_dev);
+		kfree(input);
+		return ret;
+	}
+	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYR,
+				pcf50633_input_irq, input);
+	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYF,
+				pcf50633_input_irq, input);
+
+	return 0;
+}
+
+static int __devexit pcf50633_input_remove(struct platform_device *pdev)
+{
+	struct pcf50633_input *input  = platform_get_drvdata(pdev);
+
+	pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYR);
+	pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYF);
+
+	input_unregister_device(input->input_dev);
+	kfree(input);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_input_driver = {
+	.driver = {
+		.name = "pcf50633-input",
+	},
+	.probe = pcf50633_input_probe,
+	.remove = __devexit_p(pcf50633_input_remove),
+};
+
+static int __init pcf50633_input_init(void)
+{
+	return platform_driver_register(&pcf50633_input_driver);
+}
+module_init(pcf50633_input_init);
+
+static void __exit pcf50633_input_exit(void)
+{
+	platform_driver_unregister(&pcf50633_input_driver);
+}
+module_exit(pcf50633_input_exit);
+
+MODULE_AUTHOR("Balaji Rao <[email protected]>");
+MODULE_DESCRIPTION("PCF50633 input driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-input");

drivers/mfd/Kconfig

@@ -217,6 +217,29 @@ config MFD_WM8350_I2C
 	  I2C as the control interface.  Additional options must be
 	  selected to enable support for the functionality of the chip.
 
+config MFD_PCF50633
+	tristate "Support for NXP PCF50633"
+	depends on I2C
+	help
+	  Say yes here if you have NXP PCF50633 chip on your board.
+	  This core driver provides register access and IRQ handling
+	  facilities, and registers devices for the various functions
+	  so that function-specific drivers can bind to them.
+
+config PCF50633_ADC
+	tristate "Support for NXP PCF50633 ADC"
+	depends on MFD_PCF50633
+	help
+	 Say yes here if you want to include support for ADC in the
+	 NXP PCF50633 chip.
+
+config PCF50633_GPIO
+	tristate "Support for NXP PCF50633 GPIO"
+	depends on MFD_PCF50633
+	help
+	 Say yes here if you want to include support GPIO for pins on
+	 the PCF50633 chip.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"

drivers/mfd/Makefile

@@ -37,3 +37,7 @@ endif
 obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 
 obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
+
+obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
+obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
+obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o

drivers/mfd/dm355evm_msp.c

@@ -107,6 +107,9 @@ static const u8 msp_gpios[] = {
 	MSP_GPIO(0, SWITCH1), MSP_GPIO(1, SWITCH1),
 	MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
 	MSP_GPIO(4, SWITCH1),
+	/* switches on MMC/SD sockets */
+	MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC),	/* mmc0 WP, nCD */
+	MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC),	/* mmc1 WP, nCD */
 };
 
 #define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
@@ -304,6 +307,13 @@ static int add_children(struct i2c_client *client)
 		gpio_export(gpio, false);
 	}
 
+	/* MMC/SD inputs -- right after the last config input */
+	if (client->dev.platform_data) {
+		void (*mmcsd_setup)(unsigned) = client->dev.platform_data;
+
+		mmcsd_setup(dm355evm_msp_gpio.base + 8 + 5);
+	}
+
 	/* RTC is a 32 bit counter, no alarm */
 	if (msp_has_rtc()) {
 		child = add_child(client, "rtc-dm355evm",