Merge branch 'linus' into tracing/hw-breakpoints

Conflicts:
	arch/x86/kernel/process_64.c

Semantic conflict fixed in:
	arch/x86/kvm/x86.c

Signed-off-by: Ingo Molnar <[email protected]>

Documentation/00-INDEX

@@ -82,6 +82,8 @@ block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
 	- info on block devices & drivers
+btmrvl.txt
+	- info on Marvell Bluetooth driver usage.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/

Documentation/RCU/RTFP.txt

@@ -743,3 +743,80 @@ Revised:
 	RCU, realtime RCU, sleepable RCU, performance.
 "
 }
+
+@article{PaulEMcKenney2008RCUOSR
+,author="Paul E. McKenney and Jonathan Walpole"
+,title="Introducing technology into the {Linux} kernel: a case study"
+,Year="2008"
+,journal="SIGOPS Oper. Syst. Rev."
+,volume="42"
+,number="5"
+,pages="4--17"
+,issn="0163-5980"
+,doi={http://doi.acm.org/10.1145/1400097.1400099}
+,publisher="ACM"
+,address="New York, NY, USA"
+,annotation={
+	Linux changed RCU to a far greater degree than RCU has changed Linux.
+}
+}
+
+@unpublished{PaulEMcKenney2008HierarchicalRCU
+,Author="Paul E. McKenney"
+,Title="Hierarchical {RCU}"
+,month="November"
+,day="3"
+,year="2008"
+,note="Available:
+\url{http://lwn.net/Articles/305782/}
+[Viewed November 6, 2008]"
+,annotation="
+	RCU with combining-tree-based grace-period detection,
+	permitting it to handle thousands of CPUs.
+"
+}
+
+@conference{PaulEMcKenney2009MaliciousURCU
+,Author="Paul E. McKenney"
+,Title="Using a Malicious User-Level {RCU} to Torture {RCU}-Based Algorithms"
+,Booktitle="linux.conf.au 2009"
+,month="January"
+,year="2009"
+,address="Hobart, Australia"
+,note="Available:
+\url{http://www.rdrop.com/users/paulmck/RCU/urcutorture.2009.01.22a.pdf}
+[Viewed February 2, 2009]"
+,annotation="
+	Realtime RCU and torture-testing RCU uses.
+"
+}
+
+@unpublished{MathieuDesnoyers2009URCU
+,Author="Mathieu Desnoyers"
+,Title="[{RFC} git tree] Userspace {RCU} (urcu) for {Linux}"
+,month="February"
+,day="5"
+,year="2009"
+,note="Available:
+\url{http://lkml.org/lkml/2009/2/5/572}
+\url{git://lttng.org/userspace-rcu.git}
+[Viewed February 20, 2009]"
+,annotation="
+	Mathieu Desnoyers's user-space RCU implementation.
+	git://lttng.org/userspace-rcu.git
+"
+}
+
+@unpublished{PaulEMcKenney2009BloatWatchRCU
+,Author="Paul E. McKenney"
+,Title="{RCU}: The {Bloatwatch} Edition"
+,month="March"
+,day="17"
+,year="2009"
+,note="Available:
+\url{http://lwn.net/Articles/323929/}
+[Viewed March 20, 2009]"
+,annotation="
+	Uniprocessor assumptions allow simplified RCU implementation.
+"
+}

Documentation/RCU/UP.txt

@@ -2,14 +2,13 @@ RCU on Uniprocessor Systems
 
 
 A common misconception is that, on UP systems, the call_rcu() primitive
-may immediately invoke its function, and that the synchronize_rcu()
-primitive may return immediately.  The basis of this misconception
+may immediately invoke its function.  The basis of this misconception
 is that since there is only one CPU, it should not be necessary to
 wait for anything else to get done, since there are no other CPUs for
 anything else to be happening on.  Although this approach will -sort- -of-
 work a surprising amount of the time, it is a very bad idea in general.
-This document presents three examples that demonstrate exactly how bad an
-idea this is.
+This document presents three examples that demonstrate exactly how bad
+an idea this is.
 
 
 Example 1: softirq Suicide
@@ -82,11 +81,18 @@ Quick Quiz #2: What locking restriction must RCU callbacks respect?
 
 Summary
 
-Permitting call_rcu() to immediately invoke its arguments or permitting
-synchronize_rcu() to immediately return breaks RCU, even on a UP system.
-So do not do it!  Even on a UP system, the RCU infrastructure -must-
-respect grace periods, and -must- invoke callbacks from a known environment
-in which no locks are held.
+Permitting call_rcu() to immediately invoke its arguments breaks RCU,
+even on a UP system.  So do not do it!  Even on a UP system, the RCU
+infrastructure -must- respect grace periods, and -must- invoke callbacks
+from a known environment in which no locks are held.
+
+It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return
+immediately on an UP system.  It is also safe for synchronize_rcu()
+to return immediately on UP systems, except when running preemptable
+RCU.
+
+Quick Quiz #3: Why can't synchronize_rcu() return immediately on
+	UP systems running preemptable RCU?
 
 
 Answer to Quick Quiz #1:
@@ -117,3 +123,13 @@ Answer to Quick Quiz #2:
 	callbacks acquire locks directly.  However, a great many RCU
 	callbacks do acquire locks -indirectly-, for example, via
 	the kfree() primitive.
+
+Answer to Quick Quiz #3:
+	Why can't synchronize_rcu() return immediately on UP systems
+	running preemptable RCU?
+
+	Because some other task might have been preempted in the middle
+	of an RCU read-side critical section.  If synchronize_rcu()
+	simply immediately returned, it would prematurely signal the
+	end of the grace period, which would come as a nasty shock to
+	that other thread when it started running again.

Documentation/RCU/checklist.txt

@@ -11,7 +11,10 @@ over a rather long period of time, but improvements are always welcome!
 	structure is updated more than about 10% of the time, then
 	you should strongly consider some other approach, unless
 	detailed performance measurements show that RCU is nonetheless
-	the right tool for the job.
+	the right tool for the job.  Yes, you might think of RCU
+	as simply cutting overhead off of the readers and imposing it
+	on the writers.  That is exactly why normal uses of RCU will
+	do much more reading than updating.
 
 	Another exception is where performance is not an issue, and RCU
 	provides a simpler implementation.  An example of this situation
@@ -240,10 +243,11 @@ over a rather long period of time, but improvements are always welcome!
 	instead need to use synchronize_irq() or synchronize_sched().
 
 12.	Any lock acquired by an RCU callback must be acquired elsewhere
-	with irq disabled, e.g., via spin_lock_irqsave().  Failing to
-	disable irq on a given acquisition of that lock will result in
-	deadlock as soon as the RCU callback happens to interrupt that
-	acquisition's critical section.
+	with softirq disabled, e.g., via spin_lock_irqsave(),
+	spin_lock_bh(), etc.  Failing to disable irq on a given
+	acquisition of that lock will result in deadlock as soon as the
+	RCU callback happens to interrupt that acquisition's critical
+	section.
 
 13.	RCU callbacks can be and are executed in parallel.  In many cases,
 	the callback code simply wrappers around kfree(), so that this
@@ -310,3 +314,9 @@ over a rather long period of time, but improvements are always welcome!
 	Because these primitives only wait for pre-existing readers,
 	it is the caller's responsibility to guarantee safety to
 	any subsequent readers.
+
+16.	The various RCU read-side primitives do -not- contain memory
+	barriers.  The CPU (and in some cases, the compiler) is free
+	to reorder code into and out of RCU read-side critical sections.
+	It is the responsibility of the RCU update-side primitives to
+	deal with this.

Documentation/RCU/rcu.txt

@@ -36,7 +36,7 @@ o	How can the updater tell when a grace period has completed
 	executed in user mode, or executed in the idle loop, we can
 	safely free up that item.
 
-	Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
+	Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
 	same effect, but require that the readers manipulate CPU-local
 	counters.  These counters allow limited types of blocking
 	within RCU read-side critical sections.  SRCU also uses
@@ -79,10 +79,10 @@ o	I hear that RCU is patented?  What is with that?
 o	I hear that RCU needs work in order to support realtime kernels?
 
 	This work is largely completed.  Realtime-friendly RCU can be
-	enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter.
-	However, work is in progress for enabling priority boosting of
-	preempted RCU read-side critical sections.  This is needed if you
-	have CPU-bound realtime threads.
+	enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration
+	parameter.  However, work is in progress for enabling priority
+	boosting of preempted RCU read-side critical sections.	This is
+	needed if you have CPU-bound realtime threads.
 
 o	Where can I find more information on RCU?
 

Documentation/RCU/rcubarrier.txt

@@ -170,6 +170,13 @@ module invokes call_rcu() from timers, you will need to first cancel all
 the timers, and only then invoke rcu_barrier() to wait for any remaining
 RCU callbacks to complete.
 
+Of course, if you module uses call_rcu_bh(), you will need to invoke
+rcu_barrier_bh() before unloading.  Similarly, if your module uses
+call_rcu_sched(), you will need to invoke rcu_barrier_sched() before
+unloading.  If your module uses call_rcu(), call_rcu_bh(), -and-
+call_rcu_sched(), then you will need to invoke each of rcu_barrier(),
+rcu_barrier_bh(), and rcu_barrier_sched().
+
 
 Implementing rcu_barrier()
 

Documentation/RCU/torture.txt

@@ -76,8 +76,10 @@ torture_type	The type of RCU to test: "rcu" for the rcu_read_lock() API,
 		"rcu_sync" for rcu_read_lock() with synchronous reclamation,
 		"rcu_bh" for the rcu_read_lock_bh() API, "rcu_bh_sync" for
 		rcu_read_lock_bh() with synchronous reclamation, "srcu" for
-		the "srcu_read_lock()" API, and "sched" for the use of
-		preempt_disable() together with synchronize_sched().
+		the "srcu_read_lock()" API, "sched" for the use of
+		preempt_disable() together with synchronize_sched(),
+		and "sched_expedited" for the use of preempt_disable()
+		with synchronize_sched_expedited().
 
 verbose		Enable debug printk()s.  Default is disabled.
 
@@ -162,6 +164,23 @@ of the "old" and "current" counters for the corresponding CPU.  The
 "idx" value maps the "old" and "current" values to the underlying array,
 and is useful for debugging.
 
+Similarly, sched_expedited RCU provides the following:
+
+	sched_expedited-torture: rtc: d0000000016c1880 ver: 1090796 tfle: 0 rta: 1090796 rtaf: 0 rtf: 1090787 rtmbe: 0 nt: 27713319
+	sched_expedited-torture: Reader Pipe:  12660320201 95875 0 0 0 0 0 0 0 0 0
+	sched_expedited-torture: Reader Batch:  12660424885 0 0 0 0 0 0 0 0 0 0
+	sched_expedited-torture: Free-Block Circulation:  1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
+	state: -1 / 0:0 3:0 4:0
+
+As before, the first four lines are similar to those for RCU.
+The last line shows the task-migration state.  The first number is
+-1 if synchronize_sched_expedited() is idle, -2 if in the process of
+posting wakeups to the migration kthreads, and N when waiting on CPU N.
+Each of the colon-separated fields following the "/" is a CPU:state pair.
+Valid states are "0" for idle, "1" for waiting for quiescent state,
+"2" for passed through quiescent state, and "3" when a race with a
+CPU-hotplug event forces use of the synchronize_sched() primitive.
+
 
 USAGE
 

Documentation/RCU/trace.txt

@@ -191,8 +191,7 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 
 The output of "cat rcu/rcudata" looks as follows:
 
-rcu:
-rcu:
+rcu_sched:
   0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
   1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
   2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
@@ -306,7 +305,7 @@ comma-separated-variable spreadsheet format.
 
 The output of "cat rcu/rcugp" looks as follows:
 
-rcu: completed=33062  gpnum=33063
+rcu_sched: completed=33062  gpnum=33063
 rcu_bh: completed=464  gpnum=464
 
 Again, this output is for both "rcu" and "rcu_bh".  The fields are
@@ -413,7 +412,7 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 
 The output of "cat rcu/rcu_pending" looks as follows:
 
-rcu:
+rcu_sched:
   0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
   1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
   2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629

Documentation/RCU/whatisRCU.txt

@@ -136,10 +136,10 @@ rcu_read_lock()
 	Used by a reader to inform the reclaimer that the reader is
 	entering an RCU read-side critical section.  It is illegal
 	to block while in an RCU read-side critical section, though
-	kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side
-	critical sections.  Any RCU-protected data structure accessed
-	during an RCU read-side critical section is guaranteed to remain
-	unreclaimed for the full duration of that critical section.
+	kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU
+	read-side critical sections.  Any RCU-protected data structure
+	accessed during an RCU read-side critical section is guaranteed to
+	remain unreclaimed for the full duration of that critical section.
 	Reference counts may be used in conjunction with RCU to maintain
 	longer-term references to data structures.
 
@@ -785,6 +785,7 @@ RCU pointer/list traversal:
 	rcu_dereference
 	list_for_each_entry_rcu
 	hlist_for_each_entry_rcu
+	hlist_nulls_for_each_entry_rcu
 
 	list_for_each_continue_rcu	(to be deprecated in favor of new
 					 list_for_each_entry_continue_rcu)
@@ -807,26 +808,33 @@ RCU:	Critical sections	Grace period		Barrier
 
 	rcu_read_lock		synchronize_net		rcu_barrier
 	rcu_read_unlock		synchronize_rcu
+				synchronize_rcu_expedited
 				call_rcu
 
 
 bh:	Critical sections	Grace period		Barrier
 
 	rcu_read_lock_bh	call_rcu_bh		rcu_barrier_bh
-	rcu_read_unlock_bh
+	rcu_read_unlock_bh	synchronize_rcu_bh
+				synchronize_rcu_bh_expedited
 
 
 sched:	Critical sections	Grace period		Barrier
 
-	[preempt_disable]	synchronize_sched	rcu_barrier_sched
-	[and friends]		call_rcu_sched
+	rcu_read_lock_sched	synchronize_sched	rcu_barrier_sched
+	rcu_read_unlock_sched	call_rcu_sched
+	[preempt_disable]	synchronize_sched_expedited
+	[and friends]
 
 
 SRCU:	Critical sections	Grace period		Barrier
 
 	srcu_read_lock		synchronize_srcu	N/A
 	srcu_read_unlock
 
+SRCU:	Initialization/cleanup
+	init_srcu_struct
+	cleanup_srcu_struct
 
 See the comment headers in the source code (or the docbook generated
 from them) for more information.