Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "A big update to the Atmel touchscreen driver, devm support for polled
  input devices, several drivers have been converted to using managed
  resources, and assorted driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
  Input: synaptics - fix resolution for manually provided min/max
  Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version
  Input: max8997_haptic - add error handling for regulator and pwm
  Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set
  Input: elantech - deal with clickpads reporting right button events
  Input: edt-ft5x06 - fix an i2c write for M09 support
  Input: omap-keypad - remove platform data support
  ARM: OMAP2+: remove unused omap4-keypad file and code
  Input: ab8500-ponkey - switch to using managed resources
  Input: max8925_onkey - switch to using managed resources
  Input: 88pm860x-ts - switch to using managed resources
  Input: 88pm860x_onkey - switch to using managed resources
  Input: intel-mid-touch - switch to using managed resources
  Input: wacom - process outbound for newer Cintiqs
  Input: wacom - set stylus_in_proximity when pen is in range
  DTS: ARM: OMAP3-N900: Add tsc2005 support
  Input: tsc2005 - add DT support
  Input: add common DT binding for touchscreens
  Input: jornada680_kbd - switch top using managed resources
  Input: adp5520-keys - switch to using managed resources
  ...

Documentation/devicetree/bindings/input/st-keyscan.txt

@@ -0,0 +1,60 @@
+* ST Keyscan controller Device Tree bindings
+
+The ST keyscan controller Device Tree binding is based on the
+matrix-keymap.
+
+Required properties:
+- compatible: "st,sti-keyscan"
+
+- reg: Register base address and size of st-keyscan controller.
+
+- interrupts: Interrupt number for the st-keyscan controller.
+
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+
+- pinctrl: Should specify pin control groups used for this controller.
+  See ../pinctrl/pinctrl-bindings.txt for details.
+
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
+
+- keypad,num-rows: Number of row lines connected to the keypad controller.
+
+- keypad,num-columns: Number of column lines connected to the keypad
+  controller.
+
+Optional property:
+- st,debounce_us: Debouncing interval time in microseconds
+
+Example:
+
+keyscan: keyscan@fe4b0000 {
+	compatible = "st,sti-keyscan";
+	reg = <0xfe4b0000 0x2000>;
+	interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+	clocks	= <&CLK_SYSIN>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_keyscan>;
+
+	keypad,num-rows = <4>;
+	keypad,num-columns = <4>;
+	st,debounce_us = <5000>;
+
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+			 MATRIX_KEY(0x00, 0x01, KEY_F9)
+			 MATRIX_KEY(0x00, 0x02, KEY_F5)
+			 MATRIX_KEY(0x00, 0x03, KEY_F1)
+			 MATRIX_KEY(0x01, 0x00, KEY_F14)
+			 MATRIX_KEY(0x01, 0x01, KEY_F10)
+			 MATRIX_KEY(0x01, 0x02, KEY_F6)
+			 MATRIX_KEY(0x01, 0x03, KEY_F2)
+			 MATRIX_KEY(0x02, 0x00, KEY_F15)
+			 MATRIX_KEY(0x02, 0x01, KEY_F11)
+			 MATRIX_KEY(0x02, 0x02, KEY_F7)
+			 MATRIX_KEY(0x02, 0x03, KEY_F3)
+			 MATRIX_KEY(0x03, 0x00, KEY_F16)
+			 MATRIX_KEY(0x03, 0x01, KEY_F12)
+			 MATRIX_KEY(0x03, 0x02, KEY_F8)
+			 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+	};

Documentation/devicetree/bindings/input/touchscreen/sun4i.txt

@@ -0,0 +1,20 @@
+sun4i resistive touchscreen controller
+--------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-ts"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+
+Optional properties:
+ - allwinner,ts-attached: boolean indicating that an actual touchscreen is
+			  attached to the controller
+
+Example:
+
+	rtp: rtp@01c25000 {
+		compatible = "allwinner,sun4i-a10-ts";
+		reg = <0x01c25000 0x100>;
+		interrupts = <29>;
+		allwinner,ts-attached;
+	};

Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt

@@ -0,0 +1,27 @@
+General Touchscreen Properties:
+
+Optional properties for Touchscreens:
+ - touchscreen-size-x		: horizontal resolution of touchscreen
+				  (in pixels)
+ - touchscreen-size-y		: vertical resolution of touchscreen
+				  (in pixels)
+ - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
+				  dependent on the controller)
+ - touchscreen-fuzz-x		: horizontal noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-y		: vertical noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-pressure	: pressure noise value of the absolute input
+				  device (arbitrary range dependent on the
+				  controller)
+ - touchscreen-inverted-x	: X axis is inverted (boolean)
+ - touchscreen-inverted-y	: Y axis is inverted (boolean)
+
+Deprecated properties for Touchscreens:
+ - x-size			: deprecated name for touchscreen-size-x
+ - y-size			: deprecated name for touchscreen-size-y
+ - moving-threshold		: deprecated name for a combination of
+				  touchscreen-fuzz-x and touchscreen-fuzz-y
+ - contact-threshold		: deprecated name for touchscreen-fuzz-pressure
+ - x-invert			: deprecated name for touchscreen-inverted-x
+ - y-invert			: deprecated name for touchscreen-inverted-y

Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt

@@ -0,0 +1,42 @@
+* Texas Instruments tsc2005 touchscreen controller
+
+Required properties:
+ - compatible		      : "ti,tsc2005"
+ - reg			      : SPI device address
+ - spi-max-frequency	      : Maximal SPI speed
+ - interrupts		      : IRQ specifier
+ - reset-gpios		      : GPIO specifier
+ - vio-supply                 : Regulator specifier
+
+Optional properties:
+ - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
+				in ohm (defaults to 280)
+ - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
+				the configured time (in milli seconds), the driver
+				will reset it. This is disabled by default.
+ - properties defined in touchscreen.txt
+
+Example:
+
+&mcspi1 {
+	tsc2005@0 {
+		compatible = "ti,tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-max-x = <4096>;
+		touchscreen-max-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+}

arch/arm/boot/dts/omap3-n900.dts

@@ -651,9 +651,24 @@
 	 * Also... order in the device tree actually matters here.
 	 */
 	tsc2005@0 {
-		compatible = "tsc2005";
+		compatible = "ti,tsc2005";
 		spi-max-frequency = <6000000>;
 		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-max-x = <4096>;
+		touchscreen-max-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
 	};
 
 	acx565akm@2 {

arch/arm/mach-omap2/devices.c

@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/omap4-keypad.h>
 #include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
@@ -29,7 +28,6 @@
 #include "iomap.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include "omap4-keypad.h"
 
 #include "soc.h"
 #include "common.h"
@@ -255,37 +253,6 @@ static inline void omap_init_camera(void)
 #endif
 }
 
-int __init omap4_keyboard_init(struct omap4_keypad_platform_data
-			*sdp4430_keypad_data, struct omap_board_data *bdata)
-{
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	struct omap4_keypad_platform_data *keypad_data;
-	unsigned int id = -1;
-	char *oh_name = "kbd";
-	char *name = "omap4-keypad";
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return -ENODEV;
-	}
-
-	keypad_data = sdp4430_keypad_data;
-
-	pdev = omap_device_build(name, id, oh, keypad_data,
-				 sizeof(struct omap4_keypad_platform_data));
-
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n",
-						name, oh->name);
-		return PTR_ERR(pdev);
-	}
-	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
-
-	return 0;
-}
-
 #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
 static inline void __init omap_init_mbox(void)
 {

arch/arm/mach-s5pv210/mach-goni.c

@@ -234,14 +234,6 @@ static void __init goni_radio_init(void)
 
 /* TSP */
 static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 17,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x21,
-	.threshold	= 0x28,
-	.voltage	= 2800000,              /* 2.8V */
-	.orient		= MXT_DIAGONAL,
 	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 

drivers/input/evdev.c

@@ -629,12 +629,10 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
 	return copy_to_user(p, str, len) ? -EFAULT : len;
 }
 
-#define OLD_KEY_MAX	0x1ff
 static int handle_eviocgbit(struct input_dev *dev,
 			    unsigned int type, unsigned int size,
 			    void __user *p, int compat_mode)
 {
-	static unsigned long keymax_warn_time;
 	unsigned long *bits;
 	int len;
 
@@ -652,24 +650,8 @@ static int handle_eviocgbit(struct input_dev *dev,
 	default: return -EINVAL;
 	}
 
-	/*
-	 * Work around bugs in userspace programs that like to do
-	 * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
-	 * should be in bytes, not in bits.
-	 */
-	if (type == EV_KEY && size == OLD_KEY_MAX) {
-		len = OLD_KEY_MAX;
-		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
-			pr_warning("(EVIOCGBIT): Suspicious buffer size %u, "
-				   "limiting output to %zu bytes. See "
-				   "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
-				   OLD_KEY_MAX,
-				   BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
-	}
-
 	return bits_to_user(bits, len, size, p, compat_mode);
 }
-#undef OLD_KEY_MAX
 
 static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
 {