Merge tag 'drm-intel-fixes-2016-05-02' of git://anongit.freedesktop.o…

…rg/drm-intel into drm-fixes

i915 fixes for 4.6. A bit more than I'd like at this stage, but
OTOH they're all stable material.

* tag 'drm-intel-fixes-2016-05-02' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
  drm/i915: Fix system resume if PCI device remained enabled
  drm/i915: Avoid stalling on pending flips for legacy cursor updates

drivers/gpu/drm/i915/i915_drv.c

@@ -792,7 +792,7 @@ static int i915_drm_resume(struct drm_device *dev)
 static int i915_drm_resume_early(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret = 0;
+	int ret;
 
 	/*
 	 * We have a resume ordering issue with the snd-hda driver also
@@ -803,6 +803,36 @@ static int i915_drm_resume_early(struct drm_device *dev)
 	 * FIXME: This should be solved with a special hdmi sink device or
 	 * similar so that power domains can be employed.
 	 */
+
+	/*
+	 * Note that we need to set the power state explicitly, since we
+	 * powered off the device during freeze and the PCI core won't power
+	 * it back up for us during thaw. Powering off the device during
+	 * freeze is not a hard requirement though, and during the
+	 * suspend/resume phases the PCI core makes sure we get here with the
+	 * device powered on. So in case we change our freeze logic and keep
+	 * the device powered we can also remove the following set power state
+	 * call.
+	 */
+	ret = pci_set_power_state(dev->pdev, PCI_D0);
+	if (ret) {
+		DRM_ERROR("failed to set PCI D0 power state (%d)\n", ret);
+		goto out;
+	}
+
+	/*
+	 * Note that pci_enable_device() first enables any parent bridge
+	 * device and only then sets the power state for this device. The
+	 * bridge enabling is a nop though, since bridge devices are resumed
+	 * first. The order of enabling power and enabling the device is
+	 * imposed by the PCI core as described above, so here we preserve the
+	 * same order for the freeze/thaw phases.
+	 *
+	 * TODO: eventually we should remove pci_disable_device() /
+	 * pci_enable_enable_device() from suspend/resume. Due to how they
+	 * depend on the device enable refcount we can't anyway depend on them
+	 * disabling/enabling the device.
+	 */
 	if (pci_enable_device(dev->pdev)) {
 		ret = -EIO;
 		goto out;

drivers/gpu/drm/i915/i915_reg.h

@@ -2907,7 +2907,14 @@ enum skl_disp_power_wells {
 #define GEN6_RP_STATE_CAP	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
 #define BXT_RP_STATE_CAP        _MMIO(0x138170)
 
-#define INTERVAL_1_28_US(us)	(((us) * 100) >> 7)
+/*
+ * Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS
+ * 8300) freezing up around GPU hangs. Looks as if even
+ * scheduling/timer interrupts start misbehaving if the RPS
+ * EI/thresholds are "bad", leading to a very sluggish or even
+ * frozen machine.
+ */
+#define INTERVAL_1_28_US(us)	roundup(((us) * 100) >> 7, 25)
 #define INTERVAL_1_33_US(us)	(((us) * 3)   >> 2)
 #define INTERVAL_0_833_US(us)	(((us) * 6) / 5)
 #define GT_INTERVAL_FROM_US(dev_priv, us) (IS_GEN9(dev_priv) ? \

drivers/gpu/drm/i915/intel_ddi.c

@@ -443,9 +443,17 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
 	} else if (IS_BROADWELL(dev_priv)) {
 		ddi_translations_fdi = bdw_ddi_translations_fdi;
 		ddi_translations_dp = bdw_ddi_translations_dp;
-		ddi_translations_edp = bdw_ddi_translations_edp;
+
+		if (dev_priv->edp_low_vswing) {
+			ddi_translations_edp = bdw_ddi_translations_edp;
+			n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
+		} else {
+			ddi_translations_edp = bdw_ddi_translations_dp;
+			n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
+		}
+
 		ddi_translations_hdmi = bdw_ddi_translations_hdmi;
-		n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
+
 		n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
 		n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
 		hdmi_default_entry = 7;
@@ -3201,12 +3209,6 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 	intel_ddi_clock_get(encoder, pipe_config);
 }
 
-static void intel_ddi_destroy(struct drm_encoder *encoder)
-{
-	/* HDMI has nothing special to destroy, so we can go with this. */
-	intel_dp_encoder_destroy(encoder);
-}
-
 static bool intel_ddi_compute_config(struct intel_encoder *encoder,
 				     struct intel_crtc_state *pipe_config)
 {
@@ -3225,7 +3227,8 @@ static bool intel_ddi_compute_config(struct intel_encoder *encoder,
 }
 
 static const struct drm_encoder_funcs intel_ddi_funcs = {
-	.destroy = intel_ddi_destroy,
+	.reset = intel_dp_encoder_reset,
+	.destroy = intel_dp_encoder_destroy,
 };
 
 static struct intel_connector *
@@ -3324,6 +3327,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
 	intel_encoder->post_disable = intel_ddi_post_disable;
 	intel_encoder->get_hw_state = intel_ddi_get_hw_state;
 	intel_encoder->get_config = intel_ddi_get_config;
+	intel_encoder->suspend = intel_dp_encoder_suspend;
 
 	intel_dig_port->port = port;
 	intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &

drivers/gpu/drm/i915/intel_display.c

@@ -13351,6 +13351,9 @@ static int intel_atomic_prepare_commit(struct drm_device *dev,
 	}
 
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		if (state->legacy_cursor_update)
+			continue;
+
 		ret = intel_crtc_wait_for_pending_flips(crtc);
 		if (ret)
 			return ret;

drivers/gpu/drm/i915/intel_dp.c

@@ -4898,7 +4898,7 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
 	kfree(intel_dig_port);
 }
 
-static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
+void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
 
@@ -4940,7 +4940,7 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
 	edp_panel_vdd_schedule_off(intel_dp);
 }
 
-static void intel_dp_encoder_reset(struct drm_encoder *encoder)
+void intel_dp_encoder_reset(struct drm_encoder *encoder)
 {
 	struct intel_dp *intel_dp;
 

drivers/gpu/drm/i915/intel_drv.h

@@ -1238,6 +1238,8 @@ void intel_dp_set_link_params(struct intel_dp *intel_dp,
 void intel_dp_start_link_train(struct intel_dp *intel_dp);
 void intel_dp_stop_link_train(struct intel_dp *intel_dp);
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
+void intel_dp_encoder_reset(struct drm_encoder *encoder);
+void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder);
 void intel_dp_encoder_destroy(struct drm_encoder *encoder);
 int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
 bool intel_dp_compute_config(struct intel_encoder *encoder,

drivers/gpu/drm/i915/intel_hdmi.c

@@ -1415,8 +1415,16 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
 				hdmi_to_dig_port(intel_hdmi));
 	}
 
-	if (!live_status)
-		DRM_DEBUG_KMS("Live status not up!");
+	if (!live_status) {
+		DRM_DEBUG_KMS("HDMI live status down\n");
+		/*
+		 * Live status register is not reliable on all intel platforms.
+		 * So consider live_status only for certain platforms, for
+		 * others, read EDID to determine presence of sink.
+		 */
+		if (INTEL_INFO(dev_priv)->gen < 7 || IS_IVYBRIDGE(dev_priv))
+			live_status = true;
+	}
 
 	intel_hdmi_unset_edid(connector);