Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/mchehab/linux-media Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...
laijs · Jul 16, 2019 · c309b6f · c309b6f
2 parents 3e85947 + 1688694
commit c309b6f
Show file tree

Hide file tree

Showing 559 changed files with 10,527 additions and 7,593 deletions.
diff --git a/CREDITS b/CREDITS
@@ -3120,7 +3120,7 @@ S: France
 N: Rik van Riel
 E: [email protected]
 W: http://www.surriel.com/
-D: Linux-MM site, Documentation/sysctl/*, swap/mm readaround
+D: Linux-MM site, Documentation/admin-guide/sysctl/*, swap/mm readaround
 D: kswapd fixes, random kernel hacker, rmap VM,
 D: nl.linux.org administrator, minor scheduler additions
 S: Red Hat Boston

diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio
@@ -11,7 +11,7 @@ Description:
   Kernel code may export it for complete or partial access.
 
   GPIOs are identified as they are inside the kernel, using integers in
-  the range 0..INT_MAX.  See Documentation/gpio for more information.
+  the range 0..INT_MAX.  See Documentation/admin-guide/gpio for more information.
 
     /sys/class/gpio
 	/export ... asks the kernel to export a GPIO to userspace

diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill
@@ -1,6 +1,6 @@
 rfkill - radio frequency (RF) connector kill switch support
 
-For details to this subsystem look at Documentation/rfkill.txt.
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
 
 What:		/sys/class/rfkill/rfkill[0-9]+/claim
 Date:		09-Jul-2007

diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -1,6 +1,6 @@
 rfkill - radio frequency (RF) connector kill switch support
 
-For details to this subsystem look at Documentation/rfkill.txt.
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
 
 For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
 Documentation/ABI/removed/sysfs-class-rfkill.

diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
@@ -61,7 +61,7 @@ Date:		October 2002
 Contact:	Linux Memory Management list <[email protected]>
 Description:
 		The node's hit/miss statistics, in units of pages.
-		See Documentation/numastat.txt
+		See Documentation/admin-guide/numastat.rst
 
 What:		/sys/devices/system/node/nodeX/distance
 Date:		October 2002

diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats
@@ -29,4 +29,4 @@ Description:
 		17 - sectors discarded
 		18 - time spent discarding
 
-		For more details refer to Documentation/iostats.txt
+		For more details refer to Documentation/admin-guide/iostats.rst
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
@@ -15,7 +15,7 @@ Description:
 		 9 - I/Os currently in progress
 		10 - time spent doing I/Os (ms)
 		11 - weighted time spent doing I/Os (ms)
-		For more details refer Documentation/iostats.txt
+		For more details refer Documentation/admin-guide/iostats.rst
 
 
 What:		/sys/block/<disk>/<part>/stat

diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device
@@ -45,7 +45,7 @@ Description:
 		- Values below -2 are rejected with -EINVAL
 
 		For more information, see
-		Documentation/laptops/disk-shock-protection.txt
+		Documentation/admin-guide/laptops/disk-shock-protection.rst
 
 
 What:		/sys/block/*/device/ncq_prio_enable

diff --git a/Documentation/ABI/testing/sysfs-class-switchtec b/Documentation/ABI/testing/sysfs-class-switchtec
@@ -1,6 +1,6 @@
 switchtec - Microsemi Switchtec PCI Switch Management Endpoint
 
-For details on this subsystem look at Documentation/switchtec.txt.
+For details on this subsystem look at Documentation/driver-api/switchtec.rst.
 
 What: 		/sys/class/switchtec
 Date:		05-Jan-2017

diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -34,7 +34,7 @@ Description:	CPU topology files that describe kernel limits related to
 		present: cpus that have been identified as being present in
 		the system.
 
-		See Documentation/cputopology.txt for more information.
+		See Documentation/admin-guide/cputopology.rst for more information.
 
 
 What:		/sys/devices/system/cpu/probe
@@ -103,7 +103,7 @@ Description:	CPU topology files that describe a logical CPU's relationship
 		thread_siblings_list: human-readable list of cpu#'s hardware
 		threads within the same core as cpu#
 
-		See Documentation/cputopology.txt for more information.
+		See Documentation/admin-guide/cputopology.rst for more information.
 
 
 What:		/sys/devices/system/cpu/cpuidle/current_driver

diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -31,7 +31,7 @@ Description:
 		To control the LED display, use the following :
 		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
-		The DDD table can be found in Documentation/laptops/asus-laptop.txt
+		The DDD table can be found in Documentation/admin-guide/laptops/asus-laptop.rst
 
 What:		/sys/devices/platform/asus_laptop/bluetooth
 Date:		January 2007

diff --git a/Documentation/logo.txt → Documentation/COPYING-logo b/Documentation/logo.txt → Documentation/COPYING-logo
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
@@ -212,7 +212,7 @@ The standard 64-bit addressing device would do something like this::
 
 If the device only supports 32-bit addressing for descriptors in the
 coherent allocations, but supports full 64-bits for streaming mappings
-it would look like this:
+it would look like this::
 
 	if (dma_set_mask(dev, DMA_BIT_MASK(64))) {
 		dev_warn(dev, "mydev: No suitable DMA available\n");

diff --git a/Documentation/accounting/cgroupstats.txt → Documentation/accounting/cgroupstats.rst b/Documentation/accounting/cgroupstats.txt → Documentation/accounting/cgroupstats.rst
@@ -1,3 +1,7 @@
+==================
+Control Groupstats
+==================
+
 Control Groupstats is inspired by the discussion at
 http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as
 suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263.
@@ -19,9 +23,9 @@ about tasks blocked on I/O. If CONFIG_TASK_DELAY_ACCT is disabled, this
 information will not be available.
 
 To extract cgroup statistics a utility very similar to getdelays.c
-has been developed, the sample output of the utility is shown below
+has been developed, the sample output of the utility is shown below::
 
-~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
-sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
-sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
+  ~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
+  sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
+  ~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
+  sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
diff --git a/...mentation/accounting/delay-accounting.txt → ...mentation/accounting/delay-accounting.rst b/...mentation/accounting/delay-accounting.txt → ...mentation/accounting/delay-accounting.rst
@@ -1,5 +1,6 @@
+================
 Delay accounting
-----------------
+================
 
 Tasks encounter delays in execution when they wait
 for some kernel resource to become available e.g. a
@@ -39,7 +40,9 @@ in detail in a separate document in this directory. Taskstats returns a
 generic data structure to userspace corresponding to per-pid and per-tgid
 statistics. The delay accounting functionality populates specific fields of
 this structure. See
+
      include/linux/taskstats.h
+
 for a description of the fields pertaining to delay accounting.
 It will generally be in the form of counters returning the cumulative
 delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
@@ -61,13 +64,16 @@ also serves as an example of using the taskstats interface.
 Usage
 -----
 
-Compile the kernel with
+Compile the kernel with::
+
 	CONFIG_TASK_DELAY_ACCT=y
 	CONFIG_TASKSTATS=y
 
 Delay accounting is enabled by default at boot up.
-To disable, add
+To disable, add::
+
    nodelayacct
+
 to the kernel boot options. The rest of the instructions
 below assume this has not been done.
 
@@ -78,40 +84,43 @@ The utility also allows a given command to be
 executed and the corresponding delays to be
 seen.
 
-General format of the getdelays command
+General format of the getdelays command::
 
-getdelays [-t tgid] [-p pid] [-c cmd...]
+	getdelays [-t tgid] [-p pid] [-c cmd...]
 
 
-Get delays, since system boot, for pid 10
-# ./getdelays -p 10
-(output similar to next case)
+Get delays, since system boot, for pid 10::
 
-Get sum of delays, since system boot, for all pids with tgid 5
-# ./getdelays -t 5
+	# ./getdelays -p 10
+	(output similar to next case)
 
+Get sum of delays, since system boot, for all pids with tgid 5::
 
-CPU	count	real total	virtual total	delay total
-	7876	92005750	100000000	24001500
-IO	count	delay total
-	0	0
-SWAP	count	delay total
-	0	0
-RECLAIM	count	delay total
-	0	0
+	# ./getdelays -t 5
+
+
+	CPU	count	real total	virtual total	delay total
+		7876	92005750	100000000	24001500
+	IO	count	delay total
+		0	0
+	SWAP	count	delay total
+		0	0
+	RECLAIM	count	delay total
+		0	0
+
+Get delays seen in executing a given simple command::
 
-Get delays seen in executing a given simple command
-# ./getdelays -c ls /
+  # ./getdelays -c ls /
 
-bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
-boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
+  bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
+  boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
 
 
-CPU	count	real total	virtual total	delay total
+  CPU	count	real total	virtual total	delay total
 	6	4000250		4000000		0
-IO	count	delay total
+  IO	count	delay total
 	0	0
-SWAP	count	delay total
+  SWAP	count	delay total
 	0	0
-RECLAIM	count	delay total
+  RECLAIM	count	delay total
 	0	0
diff --git a/Documentation/accounting/index.rst b/Documentation/accounting/index.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Accounting
+==========
+
+.. toctree::
+   :maxdepth: 1
+
+   cgroupstats
+   delay-accounting
+   psi
+   taskstats
+   taskstats-struct
diff --git a/Documentation/accounting/psi.txt → Documentation/accounting/psi.rst b/Documentation/accounting/psi.txt → Documentation/accounting/psi.rst
@@ -35,14 +35,14 @@ Pressure interface
 Pressure information for each resource is exported through the
 respective file in /proc/pressure/ -- cpu, memory, and io.
 
-The format for CPU is as such:
+The format for CPU is as such::
 
-some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
 
-and for memory and IO:
+and for memory and IO::
 
-some avg10=0.00 avg60=0.00 avg300=0.00 total=0
-full avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
 
 The "some" line indicates the share of time in which at least some
 tasks are stalled on a given resource.
@@ -77,9 +77,9 @@ To register a trigger user has to open psi interface file under
 /proc/pressure/ representing the resource to be monitored and write the
 desired threshold and time window. The open file descriptor should be
 used to wait for trigger events using select(), poll() or epoll().
-The following format is used:
+The following format is used::
 
-<some|full> <stall amount in us> <time window in us>
+	<some|full> <stall amount in us> <time window in us>
 
 For example writing "some 150000 1000000" into /proc/pressure/memory
 would add 150ms threshold for partial memory stall measured within
@@ -115,18 +115,20 @@ trigger  is closed.
 Userspace monitor usage example
 ===============================
 
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <poll.h>
-#include <string.h>
-#include <unistd.h>
-
-/*
- * Monitor memory partial stall with 1s tracking window size
- * and 150ms threshold.
- */
-int main() {
+::
+
+  #include <errno.h>
+  #include <fcntl.h>
+  #include <stdio.h>
+  #include <poll.h>
+  #include <string.h>
+  #include <unistd.h>
+
+  /*
+   * Monitor memory partial stall with 1s tracking window size
+   * and 150ms threshold.
+   */
+  int main() {
 	const char trig[] = "some 150000 1000000";
 	struct pollfd fds;
 	int n;
@@ -165,7 +167,7 @@ int main() {
 	}
 
 	return 0;
-}
+  }
 
 Cgroup2 interface
 =================