[Keyboard] New Keyboard - OBE (qmk#13545)

Co-authored-by: Ryan <[email protected]>
Co-authored-by: Drashna Jaelre <[email protected]>

keyboards/mechwild/obe/config.h

@@ -0,0 +1,149 @@
+/*
+Copyright 2021 Kyle McCreery
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6D77 // mw = "MechWild"
+#define PRODUCT_ID      0x1707
+#define DEVICE_VER      0x0201
+#define MANUFACTURER    MechWild
+#define PRODUCT         OrangeBoyErgo
+
+/* key matrix size */
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 10
+
+#define EEPROM_I2C_24LC64
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { A8, B15, B14, B13, B12, A15, B3 }
+#define MATRIX_COL_PINS { B10, B1, B0, A7, A6, A5, A4, A3, A2, A1 }
+#define UNUSED_PINS
+
+/* encoder pins */
+#define ENCODERS_PAD_A { B5 }
+#define ENCODERS_PAD_B { B4 }
+
+/* encoder resolution */
+#define ENCODER_RESOLUTION 4
+#define TAP_CODE_DELAY 10
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* status light pins */
+#define LED_NUM_LOCK_PIN B8
+#define LED_CAPS_LOCK_PIN B9
+
+/* RGB settings, uncomment this define to enable RGB */
+//#define RGB_DI_PIN A0
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 10
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 5
+#define BOOTMAGIC_LITE_COLUMN 4

keyboards/mechwild/obe/f401/halconf.h

@@ -0,0 +1,22 @@
+/* Copyright 2021 Kyle McCreery
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next <halconf.h>
+

keyboards/mechwild/obe/f401/mcuconf.h

@@ -0,0 +1,22 @@
+/* Copyright 2021 Kyle McCreery
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE

keyboards/mechwild/obe/f401/rules.mk

@@ -0,0 +1,5 @@
+# MCU name
+MCU = STM32F401
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu

keyboards/mechwild/obe/f411/halconf.h

@@ -0,0 +1,22 @@
+/* Copyright 2021 Kyle McCreery
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next <halconf.h>
+

keyboards/mechwild/obe/f411/mcuconf.h

@@ -0,0 +1,23 @@
+/* Copyright 2021 Kyle McCreery
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+

keyboards/mechwild/obe/f411/rules.mk

@@ -0,0 +1,5 @@
+# MCU name
+MCU = STM32F411
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu

keyboards/mechwild/obe/info.json

@@ -0,0 +1,86 @@
+{
+    "keyboard_name": "MechWild OBE",
+    "url": "mechwild.com",
+    "maintainer": "Kyle McCreery",
+    "width": 19.5,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label": "k55", "x": 0.3, "y": 0}, 
+                {"label": "k54", "x": 1.72, "y": 0}, 
+                {"label": "k53", "x": 2.72, "y": 0}, 
+                {"label": "k52", "x": 4.00, "y": 0}, 
+                {"label": "k51", "x": 5, "y": 0}, 
+                {"label": "k50", "x": 6, "y": 0}, 
+                {"label": "k00", "x": 7, "y": 0}, 
+                {"label": "k01", "x": 8, "y": 0}, 
+                {"label": "k02", "x": 10.75, "y": 0}, 
+                {"label": "k03", "x": 11.75, "y": 0}, 
+                {"label": "k04", "x": 12.75, "y": 0}, 
+                {"label": "k05", "x": 13.75, "y": 0}, 
+                {"label": "k06", "x": 15, "y": 0}, 
+                {"label": "k07", "x": 16, "y": 0}, 
+                {"label": "k08", "x": 17, "y": 0}, 
+                {"label": "k09", "x": 18, "y": 0},
+                {"label": "k65", "x": 0.2, "y": 1}, 
+                {"label": "k59", "x": 1.47, "y": 1, "w": 1.5}, 
+                {"label": "k58", "x": 2.97, "y": 1}, 
+                {"label": "k57", "x": 4.50, "y": 1}, 
+                {"label": "k56", "x": 5.5, "y": 1}, 
+                {"label": "k10", "x": 6.5, "y": 1}, 
+                {"label": "k11", "x": 7.5, "y": 1}, 
+                {"label": "k12", "x": 10.25, "y": 1}, 
+                {"label": "k13", "x": 11.25, "y": 1}, 
+                {"label": "k14", "x": 12.25, "y": 1}, 
+                {"label": "k15", "x": 13.25, "y": 1}, 
+                {"label": "k16", "x": 14.75, "y": 1}, 
+                {"label": "k17", "x": 15.75, "y": 1}, 
+                {"label": "k18", "x": 16.75, "y": 1}, 
+                {"label": "k19", "x": 17.75, "y": 1, "w": 1.5},
+                {"label": "k64", "x": 0.1, "y": 2}, 
+                {"label": "k69", "x": 1.40, "y": 2, "w": 1.75}, 
+                {"label": "k68", "x": 3.12, "y": 2}, 
+                {"label": "k63", "x": 4.75, "y": 2}, 
+                {"label": "k20", "x": 5.75, "y": 2}, 
+                {"label": "k21", "x": 6.75, "y": 2}, 
+                {"label": "k22", "x": 7.75, "y": 2}, 
+                {"label": "k23", "x": 10.5, "y": 2}, 
+                {"label": "k24", "x": 11.5, "y": 2}, 
+                {"label": "k25", "x": 12.5, "y": 2}, 
+                {"label": "k26", "x": 13.5, "y": 2}, 
+                {"label": "k27", "x": 15.1, "y": 2}, 
+                {"label": "k28", "x": 16.1, "y": 2}, 
+                {"label": "k29", "x": 17.1, "y": 2, "w": 2.25},
+                {"label": "k62", "x": 1.22, "y": 3, "w": 2.25}, 
+                {"label": "k60", "x": 3.47, "y": 3}, 
+                {"label": "k67", "x": 5.25, "y": 3}, 
+                {"label": "k66", "x": 6.25, "y": 3}, 
+                {"label": "k30", "x": 7.25, "y": 3}, 
+                {"label": "k31", "x": 8.25, "y": 3}, 
+                {"label": "k32", "x": 10, "y": 3}, 
+                {"label": "k33", "x": 11, "y": 3}, 
+                {"label": "k34", "x": 12, "y": 3}, 
+                {"label": "k35", "x": 13, "y": 3}, 
+                {"label": "k36", "x": 14.75, "y": 3}, 
+                {"label": "k37", "x": 15.75, "y": 3}, 
+                {"label": "k38", "x": 16.75, "y": 3}, 
+                {"label": "k39", "x": 17.75, "y": 3, "w": 1.75},
+                {"label": "k61", "x": 1.25, "y": 4, "w": 1.25}, 
+                {"label": "k40", "x": 2.72, "y": 4, "w": 1.25}, 
+                {"label": "k41", "x": 5.25, "y": 4, "w": 1.25}, 
+                {"label": "k42", "x": 6.50, "y": 4, "w": 2.25}, 
+                {"label": "k43", "x": 8.75, "y": 4}, 
+                {"label": "k44", "x": 10, "y": 4, "w": 2.75}, 
+                {"label": "k45", "x": 12.75, "y": 4}, 
+                {"label": "k46", "x": 14.75, "y": 4}, 
+                {"label": "k47", "x": 15.75, "y": 4}, 
+                {"label": "k48", "x": 16.75, "y": 4},
+                {"label": "k49", "x": 17.75, "y": 4}
+            ]
+        }
+    }
+}
+
+
+

keyboards/mechwild/obe/keymaps/default/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2021 Kyle McCreery
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+ #include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN1,
+	_FN2,
+	_FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+    KC_MUTE, KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_TRNS, KC_BSPC,
+    KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_PGDN, MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+             KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_RSFT,
+             KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,  MO(1),            KC_SPC,           KC_RALT, MO(2),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN1] = LAYOUT(                                                                                   
+    KC_TRNS, KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+             KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+};