LPGAsVOmod (Translated by ChatGPT3.5&copilot, manually checked. Errors are welcome to be pointed out.)
PTC heater CAD: https://grabcad.com/library/ptc-heater-12v-50w-1
toolhead repo: https://github.com/Mamsih/VOV0-toolhead-voron-Zero
以在线CAD文件为准，stl不保证为最新版本。(The online CAD file is the authoritative version, and the stl file is not guaranteed to be the latest version.)
此方案在使用因大流量火山热端而加长的喷头时效果更佳。(This solution works better when using a toolhead that has been extended due to high flow hotend.)
风机下方为放置干燥剂的盒子。The box below the fan is for placing desiccant.
Disassemble the PTC casing and use zip ties to secure the grille and thermal sensor on the PTC through the holes reserved in the PTC air duct board. The thermal sensor should protrude from the hole in the PTC air duct board.
过滤盒打印方式和磁铁安装：(The printing method for the filter box and the installation of the magnet are as follows:)
When using the extended toolhead that is compatible with the volcano hot end, the frame connectors on the filter side need to be printed with an increased height using the appropriate print settings.
建议使用卡扣，磁扣可能会在搬动时滑脱，进一步可能导致帽子铰链断裂，当机器不再移动时可以考虑使用磁扣。It is recommended to use the first buckle. The second magnetic buckle may slip when moving, which may further cause the hat hinge to break. When the machine is no longer moving, you can consider using the magnetic buckle.
电器仓排风扇兼顾过滤，内置过滤盒，滤盒上下隔开，上部放入活性炭或hepa过滤，下部可不装东西提高电器仓散热效率，详见CAD。The electrical compartment exhaust fan takes into account filtering, with a built-in filter box. The filter box is separated from top to bottom. Activated carbon or hepa filter can be placed in the upper part, and nothing can be installed in the lower part to improve the heat dissipation efficiency of the electrical compartment. See CAD for details.
