frp is a fast reverse proxy to help you expose a local server behind a NAT or firewall to the internet. Now, it supports tcp, udp, http and https protocol when requests can be forwarded by domains to backward web services.
- What can I do with frp?
- Status
- Architecture
- Example Usage
- Features
- Development Plan
- Contributing
- Donation
- Contributors
- Expose any http and https service behind a NAT or firewall to the internet by a server with public IP address(Name-based Virtual Host Support).
- Expose any tcp service behind a NAT or firewall to the internet by a server with public IP address.
- Inspect all http requests/responses that are transmitted over the tunnel(future).
frp is under development and you can try it with latest release version. Master branch for releasing stable version when dev branch for developing.
We may change any protocol and can't promise backward compatible. Please check the release log when upgrading.
Firstly, download the latest programs from Release page according to your os and arch.
Put frps and frps.ini to your server with public IP.
Put frpc and frpc.ini to your server in LAN.
- Modify frps.ini, configure a reverse proxy named [ssh]:
# frps.ini
[common]
bind_port = 7000
[ssh]
listen_port = 6000
auth_token = 123- Start frps:
./frps -c ./frps.ini
- Modify frpc.ini, set remote frps's server IP as x.x.x.x:
# frpc.ini
[common]
server_addr = x.x.x.x
server_port = 7000
auth_token = 123
[ssh]
type = tcp
local_ip = 127.0.0.1
local_port = 22- Start frpc:
./frpc -c ./frpc.ini
- Connect to server in LAN by ssh assuming that username is test:
ssh -oPort=6000 [email protected]
Sometimes we want to expose a local web service behind a NAT network to others for testing with your own domain name and unfortunately we can't resolve a domain name to a local ip.
However, we can expose a http or https service using frp.
- Modify frps.ini, configure a http reverse proxy named [web] and set http port as 8080, custom domain as
www.yourdomain.com:
# frps.ini
[common]
bind_port = 7000
vhost_http_port = 8080
[web]
type = http
custom_domains = www.yourdomain.com
auth_token = 123- Start frps:
./frps -c ./frps.ini
- Modify frpc.ini and set remote frps server's IP as x.x.x.x. The
local_portis the port of your web service:
# frpc.ini
[common]
server_addr = x.x.x.x
server_port = 7000
auth_token = 123
[web]
type = http
local_port = 80- Start frpc:
./frpc -c ./frpc.ini
-
Resolve A record of
www.yourdomain.comto IPx.x.x.xor CNAME record to your origin domain. -
Now visit your local web service using url
http://www.yourdomain.com:8080.
- Modify frps.ini, configure a reverse proxy named [dns]:
# frps.ini
[common]
bind_port = 7000
[dns]
type = udp
listen_port = 6000
auth_token = 123- Start frps:
./frps -c ./frps.ini
- Modify frpc.ini, set remote frps's server IP as x.x.x.x, forward dns query request to google dns server
8.8.8.8:53:
# frpc.ini
[common]
server_addr = x.x.x.x
server_port = 7000
auth_token = 123
[dns]
type = udp
local_ip = 8.8.8.8
local_port = 53- Start frpc:
./frpc -c ./frpc.ini
- Send dns query request by dig:
dig @x.x.x.x -p 6000 www.goolge.com
Check frp's status and proxies's statistics information by Dashboard.
Configure a port for dashboard to enable this feature:
[common]
dashboard_port = 7500
# dashboard's username and password are both optional，if not set, default is admin.
dashboard_user = admin
dashboard_pwd = adminThen visit http://[server_addr]:7500 to see dashboard, default username and password are both admin.
auth_token in frps.ini is configured for each proxy and check for authentication when frpc login in.
Client that want's to register must set a global auth_token equals to frps.ini.
Note that time duration bewtween frpc and frps mustn't exceed 15 minutes because timestamp is used for authentication.
Howerver, this timeout duration can be modified by setting authentication_timeout in frps's configure file. It's defalut value is 900, means 15 minutes. If it is equals 0, then frps will not check authentication timeout.
Defalut value is false, you could decide if the proxy will use encryption or compression whether the type is:
# frpc.ini
[ssh]
type = tcp
listen_port = 6000
auth_token = 123
use_encryption = true
use_gzip = trueIf you want to add a new reverse proxy and avoid restarting frps, you can use this function:
dashboard_portshould be set in frps.ini:
# frps.ini
[common]
bind_port = 7000
dashboard_port = 7500- Start frps:
./frps -c ./frps.ini
- Modify frps.ini to add a new proxy [new_ssh]:
# frps.ini
[common]
bind_port = 7000
dashboard_port = 7500
[new_ssh]
listen_port = 6001
auth_token = 123- Execute
reloadcommand:
./frps -c ./frps.ini --reload
- Start frpc and [new_ssh] is available now.
Privilege mode is used for who don't want to do operations in frps everytime adding a new proxy.
All proxies's configurations are set in frpc.ini when privilege mode is enabled.
- Enable privilege mode and set
privilege_token.Client with the sameprivilege_tokencan create proxy automaticly:
# frps.ini
[common]
bind_port = 7000
privilege_mode = true
privilege_token = 1234- Start frps:
./frps -c ./frps.ini
- Enable privilege mode for proxy [ssh]:
# frpc.ini
[common]
server_addr = x.x.x.x
server_port = 7000
privilege_token = 1234
[ssh]
privilege_mode = true
local_port = 22
remote_port = 6000- Start frpc:
./frpc -c ./frpc.ini
- Connect to server in LAN by ssh assuming username is test:
ssh -oPort=6000 [email protected]
privilege_allow_ports in frps.ini is used for preventing abuse of ports in privilege mode:
# frps.ini
[common]
privilege_mode = true
privilege_token = 1234
privilege_allow_ports = 2000-3000,3001,3003,4000-50000privilege_allow_ports consists of a specific port or a range of ports divided by ,.
By default, frps send message to frpc for create a new connection to backward service when getting an user request.If a proxy's connection pool is enabled, there will be a specified number of connections pre-established.
This feature is fit for a large number of short connections.
- Configure the limit of pool count each proxy can use in frps.ini:
# frps.ini
[common]
max_pool_count = 50- Enable and specify the number of connection pool:
# frpc.ini
[ssh]
type = tcp
local_port = 22
pool_count = 10When forwarding to a local port, frp does not modify the tunneled HTTP requests at all, they are copied to your server byte-for-byte as they are received. Some application servers use the Host header for determining which development site to display. For this reason, frp can rewrite your requests with a modified Host header. Use the host_header_rewrite switch to rewrite incoming HTTP requests.
# frpc.ini
[web]
privilege_mode = true
type = http
local_port = 80
custom_domains = test.yourdomain.com
host_header_rewrite = dev.yourdomain.comIf host_header_rewrite is specified, the Host header will be rewritten to match the hostname portion of the forwarding address.
Anyone who can guess your tunnel URL can access your local web server unless you protect it with a password.
This enforces HTTP Basic Auth on all requests with the username and password you specify in frpc's configure file.
It can be only enabled when proxy type is http.
# frpc.ini
[web]
privilege_mode = true
type = http
local_port = 80
custom_domains = test.yourdomain.com
http_user = abc
http_pwd = abcVisit test.yourdomain.com and now you need to input username and password.
It is convenient to use subdomain configure for http、https type when many people use one frps server together.
# frps.ini
subdomain_host = frps.comResolve *.frps.com to the frps server's IP.
# frpc.ini
[web]
privilege_mode = true
type = http
local_port = 80
subdomain = testNow you can visit your web service by host test.frps.com.
Note that if subdomain_host is not empty, custom_domains should not be the subdomain of subdomain_host.
frp support forward http requests to different backward web services by url routing.
locations specify the prefix of URL used for routing. frps first searches for the most specific prefix location given by literal strings regardless of the listed order.
# frpc.ini
[web01]
privilege_mode = true
type = http
local_port = 80
custom_domains = web.yourdomain.com
locations = /
[web02]
privilege_mode = true
type = http
local_port = 81
custom_domains = web.yourdomain.com
locations = /news,/aboutHttp requests with url prefix /news and /about will be forwarded to web02 and others to web01.
frpc can connect frps using HTTP PROXY if you set os environment HTTP_PROXY or configure http_proxy param in frpc.ini file.
# frpc.ini
server_addr = x.x.x.x
server_port = 7000
http_proxy = http://user:[email protected]:8080- Url router.
- Log http request information in frps.
- Direct reverse proxy, like haproxy.
- Load balance to different service in frpc.
- Debug mode for frpc, prestent proxy status in terminal.
- Inspect all http requests/responses that are transmitted over the tunnel.
- Frpc can directly be a webserver for static files.
- Full control mode, dynamically modify frpc's configure with dashboard in frps.
- P2p communicate by make udp hole to penetrate NAT.
Interested in getting involved? We would like to help you!
- Take a look at our issues list and consider sending a Pull Request to dev branch.
- If you want to add a new feature, please create an issue first to describe the new feature, as well as the implementation approach. Once a proposal is accepted, create an implementation of the new features and submit it as a pull request.
- Sorry for my poor english and improvement for this document is welcome even some typo fix.
- If you have some wanderful ideas, send email to [email protected].
Note: We prefer you to give your advise in issues, so others with a same question can search it quickly and we don't need to answer them repeatly.
If frp help you a lot, you can support us by:
frp QQ group: 606194980
Donate money by paypal to my account [email protected].