Skip to content

Commit

Permalink
ptp4l: use ethtool operation to double check PHC
Browse files Browse the repository at this point in the history
If the new ethtool operation is supported, then use it to verify that the PHC
selected by the user is correct. If the user doesn't specify a PHC and ethtool
is supported then automatically select the PHC device.

If the user specifies a PHC device, and the ethtool operation is suppported,
automatically confirm that the PHC device requested is correct. This check is
performed for all ports, in order to verify that a boundary clock setup is
valid.

The check for PHC device validity is not done in the transport because the
only thing necessary for performing the check is the port name. Handled this
in the port_open code instead.

Signed-off-by: Jacob Keller <[email protected]>
  • Loading branch information
jacob-keller authored and richardcochran committed May 10, 2012
1 parent 821798d commit 0afedd7
Show file tree
Hide file tree
Showing 7 changed files with 88 additions and 12 deletions.
8 changes: 5 additions & 3 deletions clock.c
Original file line number Diff line number Diff line change
Expand Up @@ -174,18 +174,20 @@ UInteger8 clock_class(struct clock *c)
return c->dds.clockQuality.clockClass;
}

struct clock *clock_create(char *phc, struct interface *iface, int count,
struct clock *clock_create(int phc_index, struct interface *iface, int count,
struct defaultDS *ds, struct port_defaults *pod)
{
int i, max_adj, sw_ts = 0;
struct clock *c = &the_clock;
char phc[32];

srandom(time(NULL));

if (c->nports)
clock_destroy(c);

if (phc) {
if (phc_index >= 0) {
snprintf(phc, 31, "/dev/ptp%d", phc_index);
c->clkid = phc_open(phc);
if (c->clkid == CLOCK_INVALID) {
pr_err("Failed to open %s: %m", phc);
Expand Down Expand Up @@ -235,7 +237,7 @@ struct clock *clock_create(char *phc, struct interface *iface, int count,
c->fault_timeout = FAULT_RESET_SECONDS;

for (i = 0; i < count; i++) {
c->port[i] = port_open(pod, iface[i].name, iface[i].transport,
c->port[i] = port_open(pod, phc_index, iface[i].name, iface[i].transport,
iface[i].timestamping, 1+i, iface[i].dm, c);
if (!c->port[i]) {
pr_err("failed to open port %s", iface[i].name);
Expand Down
6 changes: 3 additions & 3 deletions clock.h
Original file line number Diff line number Diff line change
Expand Up @@ -66,15 +66,15 @@ UInteger8 clock_class(struct clock *c);
* Create a clock instance. There can only be one clock in any system,
* so subsequent calls will destroy the previous clock instance.
*
* @param phc PTP hardware clock device to use.
* Pass NULL to select CLOCK_REALTIME.
* @param phc_index PTP hardware clock device to use.
* Pass -1 to select CLOCK_REALTIME.
* @param interface An array of network interfaces.
* @param count The number of elements in @a interfaces.
* @param ds A pointer to a default data set for the clock.
* @param pod A pointer to a default port data set for the clock.
* @return A pointer to the single global clock instance.
*/
struct clock *clock_create(char *phc, struct interface *iface, int count,
struct clock *clock_create(int phc_index, struct interface *iface, int count,
struct defaultDS *ds, struct port_defaults *pod);

/**
Expand Down
13 changes: 13 additions & 0 deletions port.c
Original file line number Diff line number Diff line change
Expand Up @@ -33,6 +33,7 @@
#include "tmtab.h"
#include "tmv.h"
#include "util.h"
#include "sk.h"

#define PORT_MAVE_LENGTH 10

Expand Down Expand Up @@ -1328,6 +1329,7 @@ enum fsm_event port_event(struct port *p, int fd_index)
}

struct port *port_open(struct port_defaults *pod,
int phc_index,
char *name,
enum transport_type transport,
enum timestamp_type timestamping,
Expand All @@ -1336,11 +1338,22 @@ struct port *port_open(struct port_defaults *pod,
struct clock *clock)
{
struct port *p = malloc(sizeof(*p));
int checked_phc_index = -1;

if (!p)
return NULL;

memset(p, 0, sizeof(*p));

if (sk_interface_phc(name, &checked_phc_index))
pr_warning("port %d: get_ts_info not supported", number);
else if (phc_index >= 0 && phc_index != checked_phc_index) {
pr_err("port %d: PHC device mismatch", number);
pr_err("port %d: /dev/ptp%d requested, but /dev/ptp%d attached",
number, phc_index, checked_phc_index);
return NULL;
}

p->pod = *pod;
p->name = name;
p->clock = clock;
Expand Down
2 changes: 2 additions & 0 deletions port.h
Original file line number Diff line number Diff line change
Expand Up @@ -80,6 +80,7 @@ enum fsm_event port_event(struct port *port, int fd_index);
/**
* Open a network port.
* @param pod A pointer to a default port data set for this port.
* @param phc_index The PHC device index for the network device.
* @param name The name of the network interface.
* @param transport The network transport type to use on this port.
* @param timestamping The flavor of time stamping to use on this port.
Expand All @@ -89,6 +90,7 @@ enum fsm_event port_event(struct port *port, int fd_index);
* @return A pointer to an open port on success, or NULL otherwise.
*/
struct port *port_open(struct port_defaults *pod,
int phc_index,
char *name,
enum transport_type transport,
enum timestamp_type timestamping,
Expand Down
28 changes: 22 additions & 6 deletions ptp4l.c
Original file line number Diff line number Diff line change
Expand Up @@ -77,23 +77,24 @@ static void usage(char *progname)
" (may be specified multiple times)\n"
" -l [num] set the logging level to 'num'\n"
" -m slave only mode (overrides configuration file)\n"
" -p [dev] PTP hardware clock device to use, default '%s'\n"
" -p [dev] PTP hardware clock device to use, default auto\n"
" (ignored for SOFTWARE/LEGACY HW time stamping)\n"
" -q quiet mode, do not use syslog(3)\n"
" -v verbose mode, print messages to stdout\n"
"\n",
progname, DEFAULT_PHC);
progname);
}

int main(int argc, char *argv[])
{
char *config = NULL, *phc = DEFAULT_PHC, *progname;
char *config = NULL, *req_phc = NULL, *progname;
int c, i, nports = 0, slaveonly = 0;
struct interface iface[MAX_PORTS];
enum delay_mechanism dm = DM_E2E;
enum transport_type transport = TRANS_UDP_IPV4;
enum timestamp_type timestamping = TS_HARDWARE;
struct clock *clock;
int phc_index = -1;

/* Process the command line arguments. */
progname = strrchr(argv[0], '/');
Expand Down Expand Up @@ -139,7 +140,7 @@ int main(int argc, char *argv[])
dm = DM_P2P;
break;
case 'p':
phc = optarg;
req_phc = optarg;
break;
case 'q':
print_no_syslog();
Expand Down Expand Up @@ -176,8 +177,23 @@ int main(int argc, char *argv[])
for (i = 0; i < nports; i++) {
iface[i].timestamping = timestamping;
}

/* determine PHC Clock index */
if (timestamping == TS_SOFTWARE || timestamping == TS_LEGACY_HW) {
phc = NULL;
phc_index = -1;
} else if (req_phc) {
if (1 != sscanf(req_phc, "/dev/ptp%d", &phc_index)) {
fprintf(stderr, "bad ptp device string\n");
return -1;
}
} else if (sk_interface_phc(iface[0].name, &phc_index)) {
fprintf(stderr, "get_ts_info not supported\n"
"please specify ptp device\n");
return -1;
}

if (phc_index >= 0) {
pr_info("selected /dev/ptp%d as PTP clock\n", phc_index);
}

ds.slaveOnly = FALSE;
Expand Down Expand Up @@ -213,7 +229,7 @@ int main(int argc, char *argv[])
ds.clockQuality.clockClass = 255;
}

clock = clock_create(phc, iface, nports, &ds, &pod);
clock = clock_create(phc_index, iface, nports, &ds, &pod);
if (!clock) {
fprintf(stderr, "failed to create a clock\n");
return -1;
Expand Down
36 changes: 36 additions & 0 deletions sk.c
Original file line number Diff line number Diff line change
Expand Up @@ -20,6 +20,7 @@
#include <errno.h>
#include <linux/net_tstamp.h>
#include <linux/sockios.h>
#include <linux/ethtool.h>
#include <net/if.h>
#include <netinet/in.h>
#include <string.h>
Expand Down Expand Up @@ -83,6 +84,41 @@ int sk_interface_index(int fd, char *name)
return ifreq.ifr_ifindex;
}

int sk_interface_phc(char *name, int *index)
{
#ifdef ETHTOOL_GET_TS_INFO
struct ethtool_ts_info info;
struct ifreq ifr;
int fd, err;

memset(&ifr, 0, sizeof(ifr));
memset(&info, 0, sizeof(info));
info.cmd = ETHTOOL_GET_TS_INFO;
strcpy(ifr.ifr_name, name);
ifr.ifr_data = (char *) &info;
fd = socket(AF_INET, SOCK_DGRAM, 0);

if (fd < 0) {
pr_err("socket failed: %m");
return -1;
}

err = ioctl(fd, SIOCETHTOOL, &ifr);
if (err < 0) {
pr_err("ioctl SIOCETHTOOL failed: %m");
close(fd);
return -1;
}

close(fd);
*index = info.phc_index;

return 0;
#else
return -1;
#endif
}

int sk_interface_macaddr(char *name, unsigned char *mac, int len)
{
struct ifreq ifreq;
Expand Down
7 changes: 7 additions & 0 deletions sk.h
Original file line number Diff line number Diff line change
Expand Up @@ -30,6 +30,13 @@
*/
int sk_interface_index(int fd, char *device);

/**
* Obtain the PHC device index of a network interface.
* @param name The name of the interface
* @return index The phc index associated with this iface
*/
int sk_interface_phc(char *name, int *index);

/**
* Obtain the MAC address of a network interface.
* @param name The name of the interface
Expand Down

0 comments on commit 0afedd7

Please sign in to comment.