arm64: versal: Add support for new Xilinx Versal ACAPs

Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency.

The patch is adding necessary infrastructure in place without enabling
platform which is done in separate patch.

Signed-off-by: Michal Simek <[email protected]>

Kconfig

@@ -144,7 +144,7 @@ config SYS_MALLOC_F_LEN
 
 config SYS_MALLOC_LEN
 	hex "Define memory for Dynamic allocation"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || ARCH_VERSAL
 	help
 	  This defines memory to be allocated for Dynamic allocation
 	  TODO: Use for other architectures

MAINTAINERS

@@ -287,6 +287,12 @@ F:	arch/arm/mach-uniphier/
 F:	configs/uniphier_*_defconfig
 N:	uniphier
 
+ARM VERSAL
+M:	Michal Simek <[email protected]>
+S:	Maintained
+T:	git git://git.denx.de/u-boot-microblaze.git
+F:	arch/arm/mach-versal/
+
 ARM VERSATILE EXPRESS DRIVERS
 M:	Liviu Dudau <[email protected]>
 S:	Maintained

arch/arm/Kconfig

@@ -853,6 +853,14 @@ config ARCH_SUNXI
 	imply SPL_SERIAL_SUPPORT
 	imply USB_GADGET
 
+config ARCH_VERSAL
+	bool "Support Xilinx Versal Platform"
+	select ARM64
+	select CLK
+	select DM
+	select DM_SERIAL
+	select OF_CONTROL
+
 config ARCH_VF610
 	bool "Freescale Vybrid"
 	select CPU_V7A
@@ -1449,6 +1457,8 @@ source "arch/arm/cpu/armv7/vf610/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
 
+source "arch/arm/mach-versal/Kconfig"
+
 source "arch/arm/mach-zynqmp-r5/Kconfig"
 
 source "arch/arm/cpu/armv7/Kconfig"

arch/arm/Makefile

@@ -80,6 +80,7 @@ machine-$(CONFIG_ARCH_STM32MP)		+= stm32mp
 machine-$(CONFIG_TEGRA)			+= tegra
 machine-$(CONFIG_ARCH_UNIPHIER)		+= uniphier
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_ARCH_VERSAL)		+= versal
 machine-$(CONFIG_ARCH_ZYNQMP_R5)	+= zynqmp-r5
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))

arch/arm/mach-versal/Kconfig

@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+if ARCH_VERSAL
+
+config SYS_BOARD
+	string "Board name"
+	default "versal"
+
+config SYS_VENDOR
+	string "Vendor name"
+	default "xilinx"
+
+config SYS_SOC
+	default "versal"
+
+config SYS_CONFIG_NAME
+	string "Board configuration name"
+	default "xilinx_versal"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
+
+config GICV3
+	def_bool y
+
+config SYS_MALLOC_LEN
+	default 0x2000000
+
+config COUNTER_FREQUENCY
+	int "Timer clock frequency"
+	default 0
+	help
+	  Setup time clock frequency for certain platform
+
+config ZYNQ_SDHCI_MAX_FREQ
+	default 200000000
+
+endif

arch/arm/mach-versal/Makefile

@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 - 2018 Xilinx, Inc.
+# Michal Simek <[email protected]>
+#
+
+obj-y	+= clk.o
+obj-y	+= cpu.o

arch/arm/mach-versal/clk.c

@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 - 2018 Xilinx, Inc.
+ * Michal Simek <[email protected]>
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CLOCKS
+/**
+ * set_cpu_clk_info - Initialize clock framework
+ *
+ * Return: 0 always.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+	gd->cpu_clk = get_tbclk();
+
+	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+	gd->bd->bi_dsp_freq = 0;
+
+	return 0;
+}
+#endif

arch/arm/mach-versal/cpu.c

@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 - 2018 Xilinx, Inc.
+ * Michal Simek <[email protected]>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+
+static struct mm_region versal_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x70000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0xf0000000UL,
+		.phys = 0xf0000000UL,
+		.size = 0x0fe00000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0xffe00000UL,
+		.phys = 0xffe00000UL,
+		.size = 0x00200000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x400000000UL,
+		.phys = 0x400000000UL,
+		.size = 0x200000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x600000000UL,
+		.phys = 0x600000000UL,
+		.size = 0x800000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xe00000000UL,
+		.phys = 0xe00000000UL,
+		.size = 0xf200000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = versal_mem_map;
+
+u64 get_page_table_size(void)
+{
+	return 0x14000;
+}

arch/arm/mach-versal/include/mach/gpio.h

@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+/* Empty file - for compilation */

arch/arm/mach-versal/include/mach/hardware.h

@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+#define VERSAL_CRL_APB_BASEADDR	0xFF5E0000
+
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT	BIT(25)
+
+#define IOU_SWITCH_CTRL_CLKACT_BIT	BIT(25)
+#define IOU_SWITCH_CTRL_DIVISOR0_SHIFT	8
+
+struct crlapb_regs {
+	u32 reserved0[69];
+	u32 iou_switch_ctrl; /* 0x114 */
+	u32 reserved1[13];
+	u32 timestamp_ref_ctrl; /* 0x14c */
+	u32 reserved2[126];
+	u32 rst_timestamp; /* 0x348 */
+};
+
+#define crlapb_base ((struct crlapb_regs *)VERSAL_CRL_APB_BASEADDR)
+
+#define VERSAL_IOU_SCNTR_SECURE	0xFF140000
+
+#define IOU_SCNTRS_CONTROL_EN	1
+
+struct iou_scntrs_regs {
+	u32 counter_control_register; /* 0x0 */
+	u32 reserved0[7];
+	u32 base_frequency_id_register; /* 0x20 */
+};
+
+#define iou_scntr_secure ((struct iou_scntrs_regs *)VERSAL_IOU_SCNTR_SECURE)

arch/arm/mach-versal/include/mach/sys_proto.h

@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+/* Empty file - for compilation */

board/xilinx/versal/MAINTAINERS

@@ -0,0 +1,7 @@
+XILINX_VERSAL BOARDS
+M:	Michal Simek <[email protected]>
+S:	Maintained
+F:	arch/arm/dts/versal*
+F:	board/xilinx/versal/
+F:	include/configs/xilinx_versal*
+F:	configs/xilinx_versal*

board/xilinx/versal/Makefile

@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 - 2018 Xilinx, Inc.
+# Michal Simek <[email protected]>
+#
+
+obj-y	:= board.o

board/xilinx/versal/board.c

@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 - 2018 Xilinx, Inc.
+ * Michal Simek <[email protected]>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	printf("EL Level:\tEL%d\n", current_el());
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	if (current_el() == 3) {
+		u32 val;
+
+		writel(IOU_SWITCH_CTRL_CLKACT_BIT |
+		       (0x20 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT),
+		       &crlapb_base->iou_switch_ctrl);
+
+		/* Global timer init - Program time stamp reference clk */
+		val = readl(&crlapb_base->timestamp_ref_ctrl);
+		val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT;
+		writel(val, &crlapb_base->timestamp_ref_ctrl);
+
+		debug("ref ctrl 0x%x\n",
+		      readl(&crlapb_base->timestamp_ref_ctrl));
+
+		/* Clear reset of timestamp reg */
+		writel(0, &crlapb_base->rst_timestamp);
+
+		/*
+		 * Program freq register in System counter and
+		 * enable system counter.
+		 */
+		writel(COUNTER_FREQUENCY,
+		       &iou_scntr_secure->base_frequency_id_register);
+
+		debug("counter val 0x%x\n",
+		      readl(&iou_scntr_secure->base_frequency_id_register));
+
+		writel(IOU_SCNTRS_CONTROL_EN,
+		       &iou_scntr_secure->counter_control_register);
+
+		debug("scntrs control 0x%x\n",
+		      readl(&iou_scntr_secure->counter_control_register));
+		debug("timer 0x%llx\n", get_ticks());
+		debug("timer 0x%llx\n", get_ticks());
+	}
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	fdtdec_setup_memory_banksize();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	if (fdtdec_setup_mem_size_base() != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}

drivers/mmc/Kconfig

@@ -538,7 +538,7 @@ config MMC_SDHCI_TEGRA
 
 config MMC_SDHCI_ZYNQ
 	bool "Arasan SDHCI controller support"
-	depends on ARCH_ZYNQ || ARCH_ZYNQMP
+	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 	depends on DM_MMC && OF_CONTROL && BLK
 	depends on MMC_SDHCI
 	help

drivers/net/Kconfig

@@ -344,7 +344,7 @@ config XILINX_EMACLITE
 	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 
 config ZYNQ_GEM
-	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
+	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
 	select PHYLIB
 	bool "Xilinx Ethernet GEM"
 	help

drivers/spi/Kconfig

@@ -243,7 +243,7 @@ config XILINX_SPI
 
 config ZYNQ_SPI
 	bool "Zynq SPI driver"
-	depends on ARCH_ZYNQ || ARCH_ZYNQMP
+	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 	help
 	  Enable the Zynq SPI driver. This driver can be used to
 	  access the SPI NOR flash on platforms embedding this Zynq
@@ -260,7 +260,7 @@ config ZYNQ_QSPI
 
 config ZYNQMP_GQSPI
 	bool "Configure ZynqMP Generic QSPI"
-	depends on ARCH_ZYNQMP
+	depends on ARCH_ZYNQMP || ARCH_VERSAL
 	help
 	  This option is used to enable ZynqMP QSPI controller driver which
 	  is used to communicate with qspi flash devices.