Trinity Firmware

Trinity PCB

Features

• VIA Support
• RGB Matrix w/ Animations

Hardware:

https://ungodly.design/products/trinity-pcb

Firmware Installation:

Note: The ISO layout requires an LED to be removed due to a interference issue with the hotswap socket, this will physically change the rgb_matrix and cause the RGB LED colors of the 1st and 2nd row to be slightly off. Install the ISO firmware to ensure the rgb_matrix is defined correctly.

1. Download the firmware of choice, ANSI or ISO, attached to this release.
2. Boot keyboard info DFU mode using one of two methods:

• Does not require opening keyboard case:
  1. unplug USB cable
  2. press and hold the ESC key
  3. plug in USB cable
  4. wait for keyboard to show up as "RPI-RP2" disk drive on your computer
  5. release ESC key
• Requires opening keyboard case:
  1. unplug USB cable
  2. press and hold the BOOT button on the back of PCB
  3. plug in USB cable
  4. wait for keyboard to show up as "RPI-RP2" disk drive on your computer
  5. release BOOT button

2. Copy the firmware, the uf2 file, to the disk drive.
3. Upon transferring the file, the keyboard will reboot. You will no longer see the disk drive.
4. Done, enjoy the keyboard.

VIA Instructions:

While we await for the VIA code to the Github repo, you will need to perform the follow steps to get the keyboard to appear in VIA:

1. Download the "trinity_via.json" attached to this release.
2. Go to VIA website
3. In the Design tab, press the load button and select the downloaded json file.
4. Done. You should now be able to go to the Configure tab to edit your keyboard mapping.