Update README.md

README.md

@@ -6,14 +6,15 @@ STorM32 BGC
 scheme and design by OlliW<br>
 layout by Martinez (v0.17) and OlliW (above v0.17)
 
-current version: v1.2 rev2
+current version: v1.3
 
 the STorM32 BGC board is open source hardware, under the terms of the TAPR Open Hardware License as published by the Free Hardware Foundation, see http://www.tapr.org/ohl.html
 
 the firmware is free and the GUI is open source, for the details of the terms of usage/licenses see <a href="http://www.olliw.eu/2013/storm32bgc">here</a>
 
 <strong>further resources:</strong><br>- project web page http://www.olliw.eu/2013/storm32bgc/<br>- thread at rcgroups http://www.rcgroups.com/forums/showthread.php?t=2055844<br>- wiki for the documentation http://www.olliw.eu/storm32bgc-wiki/
 
+<strong>changes in v1.3:</strong><br>- voltage regulator in DPak package<br>- AUX2 instead of 3.3V pin at AUX port<br>- solder jumper to disconnect bluetooth led
 <strong>changes in v1.2:</strong><br>- minor issues of v1.1 corrected<br>- Futaba S-bus support<br>- Spektrum sattelite connector<br>- usb disconnect network modified to suite F4 processors (thanks ala42!)<br>- usb voltage protection diode added (as in v0.17)<br>- further minor changes in scheme and layout
 <br><strong>changes in v1.1:</strong><br>- reverse voltage protection added<br>- layout supports TC4452 motor drivers in DFN package for increased power capabilities<br>- high-side pnp open collector output for driving an IR led added<br>- additional connector for I2C#2 port added<br>- larger solder holes and pads for battery power connection<br>- improved pin arrangement for easier use