x86/boot/compressed: Move efi32_entry out of head_64.S

Move the efi32_entry() routine out of head_64.S and into efi-mixed.S, which reduces clutter in the complicated startup routines. It also permits linkage of some symbols used by code to be made local. Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lore.kernel.org/r/[email protected]
majek · Nov 22, 2022 · 73a6dec · 73a6dec
1 parent 91592b5
commit 73a6dec
Show file tree

Hide file tree

Showing 2 changed files with 47 additions and 55 deletions.
diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
@@ -105,7 +105,7 @@ SYM_FUNC_START(__efi64_thunk)
 	/*
 	 * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT
 	 * and IDT that was installed when the kernel started executing. The
-	 * pointers were saved at the EFI stub entry point in head_64.S.
+	 * pointers were saved by the efi32_entry() routine below.
 	 *
 	 * Pass the saved DS selector to the 32-bit code, and use far return to
 	 * restore the saved CS selector.
@@ -217,22 +217,59 @@ SYM_FUNC_START_LOCAL(efi_enter32)
 	lret
 SYM_FUNC_END(efi_enter32)
 
+/*
+ * This is the common EFI stub entry point for mixed mode.
+ *
+ * Arguments:	%ecx	image handle
+ * 		%edx	EFI system table pointer
+ *		%esi	struct bootparams pointer (or NULL when not using
+ *			the EFI handover protocol)
+ *
+ * Since this is the point of no return for ordinary execution, no registers
+ * are considered live except for the function parameters. [Note that the EFI
+ * stub may still exit and return to the firmware using the Exit() EFI boot
+ * service.]
+ */
+SYM_FUNC_START(efi32_entry)
+	call	1f
+1:	pop	%ebx
+
+	/* Save firmware GDTR and code/data selectors */
+	sgdtl	(efi32_boot_gdt - 1b)(%ebx)
+	movw	%cs, (efi32_boot_cs - 1b)(%ebx)
+	movw	%ds, (efi32_boot_ds - 1b)(%ebx)
+
+	/* Store firmware IDT descriptor */
+	sidtl	(efi32_boot_idt - 1b)(%ebx)
+
+	/* Store boot arguments */
+	leal	(efi32_boot_args - 1b)(%ebx), %ebx
+	movl	%ecx, 0(%ebx)
+	movl	%edx, 4(%ebx)
+	movl	%esi, 8(%ebx)
+	movb	$0x0, 12(%ebx)          // efi_is64
+
+	/* Disable paging */
+	movl	%cr0, %eax
+	btrl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+
+	jmp	startup_32
+SYM_FUNC_END(efi32_entry)
+
 	.data
 	.balign	8
-SYM_DATA_START(efi32_boot_gdt)
+SYM_DATA_START_LOCAL(efi32_boot_gdt)
 	.word	0
 	.quad	0
 SYM_DATA_END(efi32_boot_gdt)
 
-SYM_DATA_START(efi32_boot_idt)
+SYM_DATA_START_LOCAL(efi32_boot_idt)
 	.word	0
 	.quad	0
 SYM_DATA_END(efi32_boot_idt)
 
-SYM_DATA_START(efi32_boot_cs)
-	.word	0
-SYM_DATA_END(efi32_boot_cs)
-
-SYM_DATA_START(efi32_boot_ds)
-	.word	0
-SYM_DATA_END(efi32_boot_ds)
+SYM_DATA_LOCAL(efi32_boot_cs, .word 0)
+SYM_DATA_LOCAL(efi32_boot_ds, .word 0)
+SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
+SYM_DATA(efi_is64, .byte 1)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
@@ -289,48 +289,6 @@ SYM_FUNC_START(efi32_stub_entry)
 	popl	%esi
 	jmp	efi32_entry
 SYM_FUNC_END(efi32_stub_entry)
-
-	.text
-/*
- * This is the common EFI stub entry point for mixed mode.
- *
- * Arguments:	%ecx	image handle
- * 		%edx	EFI system table pointer
- *		%esi	struct bootparams pointer (or NULL when not using
- *			the EFI handover protocol)
- *
- * Since this is the point of no return for ordinary execution, no registers
- * are considered live except for the function parameters. [Note that the EFI
- * stub may still exit and return to the firmware using the Exit() EFI boot
- * service.]
- */
-SYM_FUNC_START_LOCAL(efi32_entry)
-	call	1f
-1:	pop	%ebx
-
-	/* Save firmware GDTR and code/data selectors */
-	sgdtl	(efi32_boot_gdt - 1b)(%ebx)
-	movw	%cs, (efi32_boot_cs - 1b)(%ebx)
-	movw	%ds, (efi32_boot_ds - 1b)(%ebx)
-
-	/* Store firmware IDT descriptor */
-	sidtl	(efi32_boot_idt - 1b)(%ebx)
-
-	/* Store boot arguments */
-	leal	(efi32_boot_args - 1b)(%ebx), %ebx
-	movl	%ecx, 0(%ebx)
-	movl	%edx, 4(%ebx)
-	movl	%esi, 8(%ebx)
-	movb	$0x0, 12(%ebx)          // efi_is64
-
-	/* Disable paging */
-	movl	%cr0, %eax
-	btrl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-
-	jmp	startup_32
-SYM_FUNC_END(efi32_entry)
-	__HEAD
 #endif
 
 	.code64
@@ -763,9 +721,6 @@ SYM_DATA_END_LABEL(boot32_idt, SYM_L_GLOBAL, boot32_idt_end)
 SYM_DATA(image_offset, .long 0)
 #endif
 #ifdef CONFIG_EFI_MIXED
-SYM_DATA(efi32_boot_args, .long 0, 0, 0)
-SYM_DATA(efi_is64, .byte 1)
-
 #define ST32_boottime		60 // offsetof(efi_system_table_32_t, boottime)
 #define BS32_handle_protocol	88 // offsetof(efi_boot_services_32_t, handle_protocol)
 #define LI32_image_base		32 // offsetof(efi_loaded_image_32_t, image_base)