Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/gregkh/staging-2.6

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (970 commits)
  staging: usbip: replace usbip_u{dbg,err,info} and printk with dev_ and pr_
  staging:iio: Trivial kconfig reorganization and uniformity improvements.
  staging:iio:documenation partial update.
  staging:iio: use pollfunc allocation helpers in remaining drivers.
  staging:iio:max1363 misc cleanups and use of for_each_bit_set to simplify event code spitting out.
  staging:iio: implement an iio_info structure to take some of the constant elements out of iio_dev.
  staging:iio:meter:ade7758: Use private data space from iio_allocate_device
  staging:iio:accel:lis3l02dq make write_reg_8 take value not a pointer to value.
  staging:iio: ring core cleanups + check if read_last available in lis3l02dq
  staging:iio:core cleanup: squash tiny wrappers and use dev_set_name to handle creation of event interface name.
  staging:iio: poll func allocation clean up.
  staging:iio:ad7780 trivial unused header cleanup.
  staging:iio:adc: AD7780: Use private data space from iio_allocate_device + trivial fixes
  staging:iio:adc:AD7780: Convert to new channel registration method
  staging:iio:adc: AD7606: Drop dev_data in favour of iio_priv()
  staging:iio:adc: AD7606: Consitently use indio_dev
  staging:iio: Rip out helper for software rings.
  staging:iio:adc:AD7298: Use private data space from iio_allocate_device
  staging:iio: rationalization of different buffer implementation hooks.
  staging:iio:imu:adis16400 avoid allocating rx, tx, and state separately from iio_dev.
  ...

Fix up trivial conflicts in
 - drivers/staging/intel_sst/intelmid.c: patches applied in both branches
 - drivers/staging/rt2860/common/cmm_data_{pci,usb}.c: removed vs spelling
 - drivers/staging/usbip/vhci_sysfs.c: trivial header file inclusion

drivers/staging/Kconfig

@@ -67,10 +67,6 @@ source "drivers/staging/echo/Kconfig"
 
 source "drivers/staging/brcm80211/Kconfig"
 
-source "drivers/staging/rt2860/Kconfig"
-
-source "drivers/staging/rt2870/Kconfig"
-
 source "drivers/staging/comedi/Kconfig"
 
 source "drivers/staging/olpc_dcon/Kconfig"
@@ -177,5 +173,9 @@ source "drivers/staging/gma500/Kconfig"
 
 source "drivers/staging/altera-stapl/Kconfig"
 
+source "drivers/staging/mei/Kconfig"
+
+source "drivers/staging/nvec/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING

drivers/staging/Makefile

@@ -12,13 +12,12 @@ obj-$(CONFIG_VIDEO_CX25821)	+= cx25821/
 obj-$(CONFIG_VIDEO_TM6000)	+= tm6000/
 obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
-obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
+obj-$(CONFIG_USBIP_CORE)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_ECHO)		+= echo/
-obj-$(CONFIG_BRCM80211)		+= brcm80211/
-obj-$(CONFIG_RT2860)		+= rt2860/
-obj-$(CONFIG_RT2870)		+= rt2870/
+obj-$(CONFIG_BRCMSMAC)		+= brcm80211/
+obj-$(CONFIG_BRCMFMAC)		+= brcm80211/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc_dcon/
 obj-$(CONFIG_ASUS_OLED)		+= asus_oled/
@@ -70,3 +69,5 @@ obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
 obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
 obj-$(CONFIG_DRM_PSB)		+= gma500/
+obj-$(CONFIG_INTEL_MEI)		+= mei/
+obj-$(CONFIG_MFD_NVEC)		+= nvec/

drivers/staging/ath6kl/Kconfig

@@ -100,12 +100,6 @@ config AR600x_BT_RESET_PIN
 	help
 	WLAN GPIO to be used for resetting BT
 
-config ATH6KL_CFG80211
-	bool "CFG80211 support"
-	depends on ATH6K_LEGACY && CFG80211
-	help
-	Enables support for CFG80211 APIs. The default option is to use WEXT. Even with this option enabled, WEXT is not explicitly disabled and the onus of not exercising WEXT lies on the application(s) running in the user space.
-
 config ATH6KL_HTC_RAW_INTERFACE
 	bool "RAW HTC support"
 	depends on ATH6K_LEGACY

drivers/staging/ath6kl/Makefile

@@ -29,26 +29,6 @@ ccflags-y += -I$(obj)/os
 ccflags-y += -I$(obj)/bmi/include
 ccflags-y += -I$(obj)/include/common/AR6002/hw4.0
 
-ifeq ($(CONFIG_AR600x_SD31_XXX),y)
-ccflags-y += -DAR600x_SD31_XXX
-endif
-
-ifeq ($(CONFIG_AR600x_WB31_XXX),y)
-ccflags-y += -DAR600x_WB31_XXX
-endif
-
-ifeq ($(CONFIG_AR600x_SD32_XXX),y)
-ccflags-y += -DAR600x_SD32_XXX
-endif
-
-ifeq ($(CONFIG_AR600x_CUSTOM_XXX),y)
-ccflags-y += -DAR600x_CUSTOM_XXX
-endif
-
-ifeq ($(CONFIG_ATH6KL_ENABLE_COEXISTENCE),y)
-ccflags-y += -DENABLE_COEXISTENCE
-endif
-
 ifeq ($(CONFIG_AR600x_DUAL_ANTENNA),y)
 ccflags-y += -DAR600x_DUAL_ANTENNA
 endif
@@ -85,11 +65,6 @@ ifeq ($(CONFIG_ATH6KL_CONFIG_GPIO_BT_RESET),y)
 ccflags-y += -DATH6KL_CONFIG_GPIO_BT_RESET
 endif
 
-ifeq ($(CONFIG_ATH6KL_CFG80211),y)
-ccflags-y += -DATH6K_CONFIG_CFG80211
-ath6kl-y += os/linux/cfg80211.o
-endif
-
 ifeq ($(CONFIG_ATH6KL_HTC_RAW_INTERFACE),y)
 ccflags-y += -DHTC_RAW_INTERFACE
 endif
@@ -115,18 +90,8 @@ ifeq ($(CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK),y)
 ccflags-y += -DATH6KL_SKIP_ABI_VERSION_CHECK
 endif
 
-ccflags-y += -DLINUX -DKERNEL_2_6
-ccflags-y += -DTCMD
-ccflags-y += -DSEND_EVENT_TO_APP
-ccflags-y += -DUSER_KEYS
-ccflags-y += -DNO_SYNC_FLUSH
-ccflags-y += -DHTC_EP_STAT_PROFILING
-ccflags-y += -DATH_AR6K_11N_SUPPORT
 ccflags-y += -DWAPI_ENABLE
 ccflags-y += -DCHECKSUM_OFFLOAD
-ccflags-y += -DWLAN_HEADERS
-ccflags-y += -DINIT_MODE_DRV_ENABLED
-ccflags-y += -DBMIENABLE_SET
 
 obj-$(CONFIG_ATH6K_LEGACY) := ath6kl.o
 ath6kl-y += htc2/AR6000/ar6k.o
@@ -136,14 +101,12 @@ ath6kl-y += htc2/htc_recv.o
 ath6kl-y += htc2/htc_services.o
 ath6kl-y += htc2/htc.o
 ath6kl-y += bmi/src/bmi.o
+ath6kl-y += os/linux/cfg80211.o
 ath6kl-y += os/linux/ar6000_drv.o
 ath6kl-y += os/linux/ar6000_raw_if.o
 ath6kl-y += os/linux/ar6000_pm.o
 ath6kl-y += os/linux/netbuf.o
-ath6kl-y += os/linux/wireless_ext.o
-ath6kl-y += os/linux/ioctl.o
 ath6kl-y += os/linux/hci_bridge.o
-ath6kl-y += os/linux/ar6k_pal.o
 ath6kl-y += miscdrv/common_drv.o
 ath6kl-y += miscdrv/credit_dist.o
 ath6kl-y += wmi/wmi.o

drivers/staging/ath6kl/bmi/include/bmi_internal.h

@@ -26,11 +26,10 @@
 
 #include "a_config.h"
 #include "athdefs.h"
-#include "a_types.h"
 #include "a_osapi.h"
 #define ATH_MODULE_NAME bmi
 #include "a_debug.h"
-#include "AR6002/hw2.0/hw/mbox_host_reg.h"
+#include "hw/mbox_host_reg.h"
 #include "bmi_msg.h"
 
 #define ATH_DEBUG_BMI  ATH_DEBUG_MAKE_MODULE_MASK(0)

drivers/staging/ath6kl/bmi/src/bmi.c

@@ -95,12 +95,12 @@ void
 BMICleanup(void)
 {
     if (pBMICmdCredits) {
-        A_FREE(pBMICmdCredits);
+        kfree(pBMICmdCredits);
         pBMICmdCredits = NULL;
     }
 
     if (pBMICmdBuf) {
-        A_FREE(pBMICmdBuf);
+        kfree(pBMICmdBuf);
         pBMICmdBuf = NULL;
     }
 }
@@ -127,12 +127,12 @@ BMIDone(struct hif_device *device)
     }
 
     if (pBMICmdCredits) {
-        A_FREE(pBMICmdCredits);
+        kfree(pBMICmdCredits);
         pBMICmdCredits = NULL;
     }
 
     if (pBMICmdBuf) {
-        A_FREE(pBMICmdBuf);
+        kfree(pBMICmdBuf);
         pBMICmdBuf = NULL;
     }
 

drivers/staging/ath6kl/hif/sdio/linux_sdio/include/hif_internal.h

@@ -27,7 +27,6 @@
 
 #include "a_config.h"
 #include "athdefs.h"
-#include "a_types.h"
 #include "a_osapi.h"
 #include "hif.h"
 #include "../../../common/hif_sdio_common.h"