formatting

ladelog.sh

@@ -10,11 +10,11 @@ fi
 openwbDebugLog "CHARGESTAT" 1 "### start (->$monthlyfile)"
 
 # check for special charge modes
-nachtladenstate=$(<"${RAMDISKDIR}/nachtladenstate")  # "Nachtladen" LP1
-nachtladen2state=$(<"${RAMDISKDIR}/nachtladen2state")  # "Morgensladen" LP1
-nachtladenstates1=$(<"${RAMDISKDIR}/nachtladenstates1")  # "Nachtladen" LP2
-nachtladen2states1=$(<"${RAMDISKDIR}/nachtladen2states1")  # "Morgensladen" LP2
-if (( nachtladenstate == 0 )) && (( nachtladen2state == 0 )) && (( nachtladenstates1 == 0 )) && (( nachtladen2states1 == 0 )); then
+nachtladenstate=$(<"${RAMDISKDIR}/nachtladenstate")       # "Nachtladen" LP1
+nachtladen2state=$(<"${RAMDISKDIR}/nachtladen2state")     # "Morgensladen" LP1
+nachtladenstates1=$(<"${RAMDISKDIR}/nachtladenstates1")   # "Nachtladen" LP2
+nachtladen2states1=$(<"${RAMDISKDIR}/nachtladen2states1") # "Morgensladen" LP2
+if ((nachtladenstate == 0)) && ((nachtladen2state == 0)) && ((nachtladenstates1 == 0)) && ((nachtladen2states1 == 0)); then
 	lmodus=$(<"${RAMDISKDIR}/lademodus")
 else
 	# "Nachtladen" or "Morgensladen" is configured, set charge mode to "7"
@@ -27,12 +27,12 @@ if [ -e "${RAMDISKDIR}/loglademodus" ]; then
 	openwbDebugLog "CHARGESTAT" 2 "\"loglademodus\"=$loglademodus"
 fi
 
-getTimeDiffString(){
+getTimeDiffString() {
 	minutes=$1
 
-	if (( minutes > 60 )); then
-		text="$(( minutes / 60 )) H $(( minutes % 60 )) Min"
-	elif (( minutes >= 0 )); then
+	if ((minutes > 60)); then
+		text="$((minutes / 60)) H $((minutes % 60)) Min"
+	elif ((minutes >= 0)); then
 		text="$minutes Min"
 	else
 		text="--"
@@ -41,46 +41,46 @@ getTimeDiffString(){
 }
 
 # function for charge points 1 to 8
-processChargepoint(){
+processChargepoint() {
 	chargePointNumber=$1
 	# quirk to handle ugly file naming
 	case $chargePointNumber in
-		1)
-			soc=$(<"${RAMDISKDIR}/soc")
-			chargePointKey="lp1"
-			chargePointKey2=""
-			chargePointKey3=$chargePointKey2
-			chargePointActivated=1  # charge point 1 is always activated
-			;;
-		2)
-			soc=$(<"${RAMDISKDIR}/soc1")
-			chargePointKey="lp2"
-			chargePointKey2="s1"
-			chargePointKey3=$chargePointKey2
-			chargePointActivated=$lastmanagement
-			;;
-		3)
-			soc=0
-			chargePointKey="lp3"
-			chargePointKey2="s2"
-			chargePointKey3=$chargePointKey
-			chargePointActivated=$lastmanagements2
-			;;
-		*)
-			soc=0
-			chargePointKey="lp$1"
-			chargePointKey2=$chargePointKey
-			chargePointKey3=$chargePointKey
-			chargePointActivatedVariableName="lastmanagement$chargePointKey"
-			chargePointActivated=${!chargePointActivatedVariableName}
-			;;
+	1)
+		soc=$(<"${RAMDISKDIR}/soc")
+		chargePointKey="lp1"
+		chargePointKey2=""
+		chargePointKey3=$chargePointKey2
+		chargePointActivated=1 # charge point 1 is always activated
+		;;
+	2)
+		soc=$(<"${RAMDISKDIR}/soc1")
+		chargePointKey="lp2"
+		chargePointKey2="s1"
+		chargePointKey3=$chargePointKey2
+		chargePointActivated=$lastmanagement
+		;;
+	3)
+		soc=0
+		chargePointKey="lp3"
+		chargePointKey2="s2"
+		chargePointKey3=$chargePointKey
+		chargePointActivated=$lastmanagements2
+		;;
+	*)
+		soc=0
+		chargePointKey="lp$1"
+		chargePointKey2=$chargePointKey
+		chargePointKey3=$chargePointKey
+		chargePointActivatedVariableName="lastmanagement$chargePointKey"
+		chargePointActivated=${!chargePointActivatedVariableName}
+		;;
 	esac
 
 	chargePointNameVariableName="${chargePointKey}name"
-	if (( chargePointActivated == 1)); then
+	if ((chargePointActivated == 1)); then
 		openwbDebugLog "CHARGESTAT" 1 "# processing charge point $chargePointNumber (${!chargePointNameVariableName})"
 		# get soc
-		if (( soc > 0 )); then
+		if ((soc > 0)); then
 			openwbDebugLog "CHARGESTAT" 1 "soc detected: $soc%"
 			soctext=", bei $soc %SoC."
 		else
@@ -89,160 +89,160 @@ processChargepoint(){
 		fi
 		# get rfid tag
 		rfid=$(<"${RAMDISKDIR}/rfid${chargePointKey}")
-		rfid=$(cut -d ',' -f 1 <<< "$rfid")
+		rfid=$(cut -d ',' -f 1 <<<"$rfid")
 		# get actual charge power
 		ladeleistung=$(<"${RAMDISKDIR}/llaktuell${chargePointKey2}")
 		# get actual meter value
 		llkwh=$(<"${RAMDISKDIR}/llkwh${chargePointKey2}")
 		openwbDebugLog "CHARGESTAT" 1 "rfid=$rfid; power=$ladeleistung; meter=$llkwh"
 		# get plug state
 		plugstat=$(<"${RAMDISKDIR}/plugstat${chargePointKey3}")
-		if (( plugstat == 1 )); then
+		if ((plugstat == 1)); then
 			# a car is connected
 			openwbDebugLog "CHARGESTAT" 1 "car connected: plugstat=$plugstat"
 			pluggedladungakt=$(<"${RAMDISKDIR}/pluggedladungakt${chargePointKey}")
-			if (( pluggedladungakt == 0 )); then
+			if ((pluggedladungakt == 0)); then
 				# new charge detected
 				openwbDebugLog "CHARGESTAT" 1 "new charge detected; meter=$llkwh"
 				# write actual meter value as start value since plugged in
-				echo "$llkwh" > "${RAMDISKDIR}/pluggedladung${chargePointKey}startkwh"
+				echo "$llkwh" >"${RAMDISKDIR}/pluggedladung${chargePointKey}startkwh"
 				# note ourself about tracking this charge
-				echo 1 > "${RAMDISKDIR}/pluggedladungakt${chargePointKey}"
+				echo 1 >"${RAMDISKDIR}/pluggedladungakt${chargePointKey}"
 			fi
-			if (( "stopchargeafterdisc$chargePointKey" == 1 )); then
+			if (("stopchargeafterdisc$chargePointKey" == 1)); then
 				openwbDebugLog "CHARGESTAT" 2 "\"stopchargeafterdisc\" set, charge point will be locked after unplug is detected"
 				boolstopchargeafterdisc=$(<"${RAMDISKDIR}/boolstopchargeafterdisc${chargePointKey}")
-				if (( boolstopchargeafterdisc == 0 )); then
+				if ((boolstopchargeafterdisc == 0)); then
 					# note ourself to lock this charge point after disconnect
-					echo 1 > "${RAMDISKDIR}/boolstopchargeafterdisc${chargePointKey}"
+					echo 1 >"${RAMDISKDIR}/boolstopchargeafterdisc${chargePointKey}"
 				fi
 			fi
 			# read start meter value since plugged
 			pluggedladungstartkwh=$(<"${RAMDISKDIR}/pluggedladung${chargePointKey}startkwh")
 			# calculate actual meter value difference since plugged
-			pluggedladungbishergeladen=$(echo "scale=2;($llkwh - $pluggedladungstartkwh)/1" |bc | sed 's/^\./0./')
-			echo "$pluggedladungbishergeladen" > "${RAMDISKDIR}/pluggedladungbishergeladen${chargePointKey}"
+			pluggedladungbishergeladen=$(echo "scale=2;($llkwh - $pluggedladungstartkwh)/1" | bc | sed 's/^\./0./')
+			echo "$pluggedladungbishergeladen" >"${RAMDISKDIR}/pluggedladungbishergeladen${chargePointKey}"
 			openwbDebugLog "CHARGESTAT" 1 "charged since plugged: $pluggedladungstartkwh - $llkwh = $pluggedladungbishergeladen"
 			# reset unplug timer
-			echo 0 > "${RAMDISKDIR}/pluggedtimer${chargePointKey}"
+			echo 0 >"${RAMDISKDIR}/pluggedtimer${chargePointKey}"
 		else
 			# no car connected
 			openwbDebugLog "CHARGESTAT" 1 "car not connected: plugstat=$plugstat"
 			pluggedtimer=$(<"${RAMDISKDIR}/pluggedtimer${chargePointKey}")
-			if (( pluggedtimer < 5 )); then
+			if ((pluggedtimer < 5)); then
 				# increment unplug timer
-				pluggedtimer=$(( pluggedtimer + 1 ))
-				echo "$pluggedtimer" > "${RAMDISKDIR}/pluggedtimer${chargePointKey}"
+				pluggedtimer=$((pluggedtimer + 1))
+				echo "$pluggedtimer" >"${RAMDISKDIR}/pluggedtimer${chargePointKey}"
 				openwbDebugLog "CHARGESTAT" 2 "pluggedtimer=$pluggedtimer"
 			else
 				# unplug timer reached 60s (in normal control loop speed)
 				# stop actual tracked charge
-				echo 0 > "${RAMDISKDIR}/pluggedladungakt${chargePointKey}"
+				echo 0 >"${RAMDISKDIR}/pluggedladungakt${chargePointKey}"
 				openwbDebugLog "CHARGESTAT" 2 "unplug detected"
 				# lock this charge point if configured
-				if (( "stopchargeafterdisc$chargePointKey" == 1 )); then
+				if (("stopchargeafterdisc$chargePointKey" == 1)); then
 					openwbDebugLog "CHARGESTAT" 2 "locking charge point"
 					boolstopchargeafterdisc=$(<"${RAMDISKDIR}/boolstopchargeafterdisc${chargePointKey}")
-					if (( boolstopchargeafterdisc == 1 )); then
-						echo 0 > "${RAMDISKDIR}/boolstopchargeafterdisc${chargePointKey}"
+					if ((boolstopchargeafterdisc == 1)); then
+						echo 0 >"${RAMDISKDIR}/boolstopchargeafterdisc${chargePointKey}"
 						mosquitto_pub -r -t "openWB/set/lp/${chargePointNumber}/ChargePointEnabled" -m "0"
 					fi
 				fi
 			fi
 		fi
-		if (( ladeleistung > 100 )); then
+		if ((ladeleistung > 100)); then
 			# charge point is charging
 			openwbDebugLog "CHARGESTAT" 1 "car is charging"
 			if [ -e "${RAMDISKDIR}/ladeustart${chargePointKey2}" ]; then
 				# charge already running
 				openwbDebugLog "CHARGESTAT" 2 "this charge was already detected"
 				# calculate actual energy charged
 				ladelstart=$(<"${RAMDISKDIR}/ladelstart${chargePointKey2}")
-				bishergeladen=$(echo "scale=2;($llkwh - $ladelstart)/1" |bc | sed 's/^\./0./')
-				echo "$bishergeladen" > "${RAMDISKDIR}/aktgeladen${chargePointKey2}"
+				bishergeladen=$(echo "scale=2;($llkwh - $ladelstart)/1" | bc | sed 's/^\./0./')
+				echo "$bishergeladen" >"${RAMDISKDIR}/aktgeladen${chargePointKey2}"
 				# calculate range charged
 				averageConsumptionVariableName="durchs$chargePointKey"
-				gelr=$(echo "scale=0;$bishergeladen * 100 / ${!averageConsumptionVariableName}" |bc)
-				echo "$gelr" > "${RAMDISKDIR}/gelr${chargePointKey}"
+				gelr=$(echo "scale=0;$bishergeladen * 100 / ${!averageConsumptionVariableName}" | bc)
+				echo "$gelr" >"${RAMDISKDIR}/gelr${chargePointKey}"
 				# calculate time remaining if energy limit is set
 				energyChargeLimitVariableName="lademkwh$chargePointKey2"
-				restzeit=$(echo "scale=0;(${!energyChargeLimitVariableName} - $bishergeladen) * 1000 * 60 / $ladeleistung" |bc)
-				echo "$restzeit" > "${RAMDISKDIR}/restzeit${chargePointKey}m"
+				restzeit=$(echo "scale=0;(${!energyChargeLimitVariableName} - $bishergeladen) * 1000 * 60 / $ladeleistung" | bc)
+				echo "$restzeit" >"${RAMDISKDIR}/restzeit${chargePointKey}m"
 				# format time charged
 				restzeittext=$(getTimeDiffString "$restzeit")
-				echo "$restzeittext" > "${RAMDISKDIR}/restzeit${chargePointKey}"
+				echo "$restzeittext" >"${RAMDISKDIR}/restzeit${chargePointKey}"
 				openwbDebugLog "CHARGESTAT" 1 "energyCharged=${bishergeladen}kWh; rangeCharged=${gelr}km; timeRemaining=${restzeit}m ($restzeittext)"
 			else
 				# new charge detected
 				openwbDebugLog "CHARGESTAT" 1 "new charge detected"
-				echo 1 > "${RAMDISKDIR}/ladungaktiv${chargePointKey}"
+				echo 1 >"${RAMDISKDIR}/ladungaktiv${chargePointKey}"
 				# save actual timestamp for this charge
 				touch "${RAMDISKDIR}/ladeustart${chargePointKey2}"
-				echo -e "$(date +%d.%m.%y-%H:%M)" > "${RAMDISKDIR}/ladeustart${chargePointKey2}"
-				echo -e "$(date +%s)" > "${RAMDISKDIR}/ladeustarts${chargePointKey2}"
+				echo -e "$(date +%d.%m.%y-%H:%M)" >"${RAMDISKDIR}/ladeustart${chargePointKey2}"
+				echo -e "$(date +%s)" >"${RAMDISKDIR}/ladeustarts${chargePointKey2}"
 				# save actual charge mode for this charge
-				echo "$lmodus" > "${RAMDISKDIR}/loglademodus"
+				echo "$lmodus" >"${RAMDISKDIR}/loglademodus"
 				# save actual meter value es start for this charge
-				echo "$llkwh" > "${RAMDISKDIR}/ladelstart${chargePointKey2}"
+				echo "$llkwh" >"${RAMDISKDIR}/ladelstart${chargePointKey2}"
 				# send push message if configured
-				if (( pushbenachrichtigung == 1 )) ; then
-					if (( pushbstartl == 1 )) ; then
+				if ((pushbenachrichtigung == 1)); then
+					if ((pushbstartl == 1)); then
 						openwbDebugLog "CHARGESTAT" 2 "sending push notification for charge point \"${!chargePointNameVariableName}\""
 						"${OPENWBBASEDIR}/runs/pushover.sh" "${!chargePointNameVariableName} Ladung gestartet$soctext"
 					fi
 				fi
 				openwbDebugLog "CHARGESTAT" 0 "LP${chargePointNumber}, Ladung gestartet"
 			fi
 			# reset our charge stop timer
-			echo 0 > "${RAMDISKDIR}/llog${chargePointKey2}"
+			echo 0 >"${RAMDISKDIR}/llog${chargePointKey2}"
 		else
 			# charge point is not charging
 			openwbDebugLog "CHARGESTAT" 1 "car is not charging"
 			llog=$(<"${RAMDISKDIR}/llog${chargePointKey2}")
-			if (( llog < 5 )); then
+			if ((llog < 5)); then
 				# increment charge stop timer
-				llog=$(( llog + 1 ))
-				echo "$llog" > "${RAMDISKDIR}/llog${chargePointKey2}"
+				llog=$((llog + 1))
+				echo "$llog" >"${RAMDISKDIR}/llog${chargePointKey2}"
 				openwbDebugLog "CHARGESTAT" 2 "llog=$llog"
 			else
 				# charge stop timer reached 60s (in normal control loop speed)
 				if [ -e "${RAMDISKDIR}/ladeustart${chargePointKey2}" ]; then
 					# a charge just finished
 					openwbDebugLog "CHARGESTAT" 1 "end of charge detected"
 					# reset detected charge
-					echo 0 > "${RAMDISKDIR}/ladungaktiv${chargePointKey}"
+					echo 0 >"${RAMDISKDIR}/ladungaktiv${chargePointKey}"
 					# clear time remaining
-					echo "--" > "${RAMDISKDIR}/restzeit${chargePointKey}"
+					echo "--" >"${RAMDISKDIR}/restzeit${chargePointKey}"
 					# calculate energy charged
 					ladelstart=$(<"${RAMDISKDIR}/ladelstart${chargePointKey2}")
-					bishergeladen=$(echo "scale=2;($llkwh - $ladelstart)/1" |bc | sed 's/^\./0./')
+					bishergeladen=$(echo "scale=2;($llkwh - $ladelstart)/1" | bc | sed 's/^\./0./')
 					# calculate range charged
 					averageConsumptionVariableName="durchs$chargePointKey"
-					gelr=$(echo "scale=0;$bishergeladen * 100 / ${!averageConsumptionVariableName}" |bc)
+					gelr=$(echo "scale=0;$bishergeladen * 100 / ${!averageConsumptionVariableName}" | bc)
 					# calculate time charged
 					start=$(<"${RAMDISKDIR}/ladeustart${chargePointKey2}")
 					ladeustarts=$(<"${RAMDISKDIR}/ladeustarts${chargePointKey2}")
 					jetzt=$(date +%d.%m.%y-%H:%M)
 					jetzts=$(date +%s)
-					ladedauer=$(( (jetzts - ladeustarts) / 60 ))
-					ladedauers=$(( jetzts - ladeustarts ))
+					ladedauer=$(((jetzts - ladeustarts) / 60))
+					ladedauers=$((jetzts - ladeustarts))
 					# calculate average power
-					ladegeschw=$(echo "scale=2;$bishergeladen * 60 * 60 / $ladedauers" |bc)
+					ladegeschw=$(echo "scale=2;$bishergeladen * 60 * 60 / $ladedauers" | bc)
 					# format time charged
 					ladedauertext=$(getTimeDiffString "$ladedauer")
 					# add charge log entry
-					if (( chargePointNumber < 3 )); then
+					if ((chargePointNumber < 3)); then
 						lademoduslogvalue=$loglademodus
 					else
 						lademoduslogvalue=$lademodus
 					fi
 					# calculate costs
-					kosten=$(echo "scale=2;$bishergeladen * $preisjekwh" |bc)
+					kosten=$(echo "scale=2;$bishergeladen * $preisjekwh" | bc)
 					# save final values
 					sed -i "1i$start,$jetzt,$gelr,$bishergeladen,$ladegeschw,$ladedauertext,$chargePointNumber,$lademoduslogvalue,$rfid,$kosten" "$monthlyfile"
 					# send push message if configured
-					if (( pushbenachrichtigung == 1 )) ; then
-						if (( pushbstopl == 1 )) ; then
+					if ((pushbenachrichtigung == 1)); then
+						if ((pushbstopl == 1)); then
 							openwbDebugLog "CHARGESTAT" 2 "sending push notification for charge point \"${!chargePointNameVariableName}\""
 							"${OPENWBBASEDIR}/runs/pushover.sh" "${!chargePointNameVariableName} Ladung gestoppt. $bishergeladen kWh in $ladedauertext mit durchschnittlich $ladegeschw kW geladen$soctext"
 						fi