Merge branch 'picoxcell/devel' into next/devel

* picoxcell/devel: (1 commit)
  ARM: picoxcell: implement watchdog restart

Documentation/arm/memory.txt

@@ -51,15 +51,14 @@ ffc00000	ffefffff	DMA memory mapping region.  Memory returned
 ff000000	ffbfffff	Reserved for future expansion of DMA
 				mapping region.
 
-VMALLOC_END	feffffff	Free for platform use, recommended.
-				VMALLOC_END must be aligned to a 2MB
-				boundary.
-
 VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
 				Memory returned by vmalloc/ioremap will
 				be dynamically placed in this region.
-				VMALLOC_START may be based upon the value
-				of the high_memory variable.
+				Machine specific static mappings are also
+				located here through iotable_init().
+				VMALLOC_START is based upon the value
+				of the high_memory variable, and VMALLOC_END
+				is equal to 0xff000000.
 
 PAGE_OFFSET	high_memory-1	Kernel direct-mapped RAM region.
 				This maps the platforms RAM, and typically

Documentation/devicetree/bindings/arm/gic.txt

@@ -42,6 +42,10 @@ Optional
 - interrupts	: Interrupt source of the parent interrupt controller. Only
   present on secondary GICs.
 
+- cpu-offset	: per-cpu offset within the distributor and cpu interface
+  regions, used when the GIC doesn't have banked registers. The offset is
+  cpu-offset * cpu-nr.
+
 Example:
 
 	intc: interrupt-controller@fff11000 {

Documentation/devicetree/bindings/arm/vic.txt

@@ -0,0 +1,29 @@
+* ARM Vectored Interrupt Controller
+
+One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
+system for interrupt routing.  For multiple controllers they can either be
+nested or have the outputs wire-OR'd together.
+
+Required properties:
+
+- compatible : should be one of
+	"arm,pl190-vic"
+	"arm,pl192-vic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : The number of cells to define the interrupts.  Must be 1 as
+  the VIC has no configuration options for interrupt sources.  The cell is a u32
+  and defines the interrupt number.
+- reg : The register bank for the VIC.
+
+Optional properties:
+
+- interrupts : Interrupt source for parent controllers if the VIC is nested.
+
+Example:
+
+	vic0: interrupt-controller@60000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x60000 0x1000>;
+	};

MAINTAINERS

@@ -5117,6 +5117,15 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/mtd/devices/phram.c
 
+PICOXCELL SUPPORT
+M:	Jamie Iles <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+T:	git git://github.com/jamieiles/linux-2.6-ji.git
+S:	Supported
+F:	arch/arm/mach-picoxcell
+F:	drivers/*/picoxcell*
+F:	drivers/*/*/picoxcell*
+
 PIN CONTROL SUBSYSTEM
 M:	Linus Walleij <[email protected]>
 S:	Maintained

arch/arm/Kconfig

@@ -650,6 +650,7 @@ config ARCH_PICOXCELL
 	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select NO_IOPORT
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  This enables support for systems based on the Picochip picoXcell
@@ -1971,7 +1972,7 @@ endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM
+	depends on !ZBOOT_ROM && !ARM_LPAE
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2001,7 +2002,7 @@ config XIP_PHYS_ADDR
 
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/arm/boot/compressed/head.S

@@ -659,6 +659,7 @@ __armv7_mmu_cache_on:
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 #endif
+		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0

arch/arm/common/Kconfig

@@ -1,8 +1,14 @@
 config ARM_GIC
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+	bool
+
+config GIC_NON_BANKED
 	bool
 
 config ARM_VIC
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	bool
 
 config ARM_VIC_NR