Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/tip/tip

Pull x86 fixes from H. Peter Anvin.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x32, siginfo: Provide proper overrides for x32 siginfo_t
  asm-generic: Allow overriding clock_t and add attributes to siginfo_t
  x32: Check __ILP32__ instead of __LP64__ for x32
  x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler
  ACPI: Convert wake_sleep_flags to a value instead of function
  x86, apic: APIC code touches invalid MSR on P5 class machines
  i387: ptrace breaks the lazy-fpu-restore logic
  x86/platform: Remove incorrect error message in x86_default_fixup_cpu_id()
  x86, efi: Add dedicated EFI stub entry point
  x86/amd: Remove broken links from comment and kernel message
  x86, microcode: Ensure that module is only loaded on supported AMD CPUs
  x86, microcode: Fix sysfs warning during module unload on unsupported CPUs

arch/x86/boot/compressed/head_32.S

@@ -33,6 +33,9 @@
 	__HEAD
 ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
+	jmp	preferred_addr
+
+	.balign	0x10
 	/*
 	 * We don't need the return address, so set up the stack so
 	 * efi_main() can find its arugments.
@@ -41,12 +44,17 @@ ENTRY(startup_32)
 
 	call	efi_main
 	cmpl	$0, %eax
-	je	preferred_addr
 	movl	%eax, %esi
-	call	1f
+	jne	2f
 1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
 	popl	%eax
-	subl	$1b, %eax
+	subl	$3b, %eax
 	subl	BP_pref_address(%esi), %eax
 	add	BP_code32_start(%esi), %eax
 	leal	preferred_addr(%eax), %eax

arch/x86/boot/compressed/head_64.S

@@ -200,18 +200,28 @@ ENTRY(startup_64)
 	 * entire text+data+bss and hopefully all of memory.
 	 */
 #ifdef CONFIG_EFI_STUB
-	pushq	%rsi
+	/*
+	 * The entry point for the PE/COFF executable is 0x210, so only
+	 * legacy boot loaders will execute this jmp.
+	 */
+	jmp	preferred_addr
+
+	.org 0x210
 	mov	%rcx, %rdi
 	mov	%rdx, %rsi
 	call	efi_main
-	popq	%rsi
-	cmpq	$0,%rax
-	je	preferred_addr
 	movq	%rax,%rsi
-	call	1f
+	cmpq	$0,%rax
+	jne	2f
 1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
 	popq	%rax
-	subq	$1b, %rax
+	subq	$3b, %rax
 	subq	BP_pref_address(%rsi), %rax
 	add	BP_code32_start(%esi), %eax
 	leaq	preferred_addr(%rax), %rax

arch/x86/boot/tools/build.c

@@ -205,8 +205,13 @@ int main(int argc, char ** argv)
 	put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
 
 #ifdef CONFIG_X86_32
-	/* Address of entry point */
-	put_unaligned_le32(i, &buf[pe_header + 0x28]);
+	/*
+	 * Address of entry point.
+	 *
+	 * The EFI stub entry point is +16 bytes from the start of
+	 * the .text section.
+	 */
+	put_unaligned_le32(i + 16, &buf[pe_header + 0x28]);
 
 	/* .text size */
 	put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]);
@@ -217,9 +222,11 @@ int main(int argc, char ** argv)
 	/*
 	 * Address of entry point. startup_32 is at the beginning and
 	 * the 64-bit entry point (startup_64) is always 512 bytes
-	 * after.
+	 * after. The EFI stub entry point is 16 bytes after that, as
+	 * the first instruction allows legacy loaders to jump over
+	 * the EFI stub initialisation
 	 */
-	put_unaligned_le32(i + 512, &buf[pe_header + 0x28]);
+	put_unaligned_le32(i + 528, &buf[pe_header + 0x28]);
 
 	/* .text size */
 	put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]);

arch/x86/include/asm/posix_types.h

@@ -7,9 +7,9 @@
 #else
 # ifdef __i386__
 #  include "posix_types_32.h"
-# elif defined(__LP64__)
-#  include "posix_types_64.h"
-# else
+# elif defined(__ILP32__)
 #  include "posix_types_x32.h"
+# else
+#  include "posix_types_64.h"
 # endif
 #endif

arch/x86/include/asm/sigcontext.h

@@ -257,7 +257,7 @@ struct sigcontext {
 	__u64 oldmask;
 	__u64 cr2;
 	struct _fpstate __user *fpstate;	/* zero when no FPU context */
-#ifndef __LP64__
+#ifdef __ILP32__
 	__u32 __fpstate_pad;
 #endif
 	__u64 reserved1[8];

arch/x86/include/asm/siginfo.h

@@ -2,7 +2,13 @@
 #define _ASM_X86_SIGINFO_H
 
 #ifdef __x86_64__
-# define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+# ifdef __ILP32__ /* x32 */
+typedef long long __kernel_si_clock_t __attribute__((aligned(4)));
+#  define __ARCH_SI_CLOCK_T		__kernel_si_clock_t
+#  define __ARCH_SI_ATTRIBUTES		__attribute__((aligned(8)))
+# else /* x86-64 */
+#  define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+# endif
 #endif
 
 #include <asm-generic/siginfo.h>

arch/x86/include/asm/unistd.h

@@ -63,10 +63,10 @@
 #else
 # ifdef __i386__
 #  include <asm/unistd_32.h>
-# elif defined(__LP64__)
-#  include <asm/unistd_64.h>
-# else
+# elif defined(__ILP32__)
 #  include <asm/unistd_x32.h>
+# else
+#  include <asm/unistd_64.h>
 # endif
 #endif
 

arch/x86/include/asm/x86_init.h

@@ -195,6 +195,5 @@ extern struct x86_msi_ops x86_msi;
 
 extern void x86_init_noop(void);
 extern void x86_init_uint_noop(unsigned int unused);
-extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node);
 
 #endif

arch/x86/kernel/acpi/sleep.c

@@ -24,6 +24,10 @@ unsigned long acpi_realmode_flags;
 static char temp_stack[4096];
 #endif
 
+asmlinkage void acpi_enter_s3(void)
+{
+	acpi_enter_sleep_state(3, wake_sleep_flags);
+}
 /**
  * acpi_suspend_lowlevel - save kernel state
  *

arch/x86/kernel/acpi/sleep.h

@@ -3,12 +3,16 @@
  */
 
 #include <asm/trampoline.h>
+#include <linux/linkage.h>
 
 extern unsigned long saved_video_mode;
 extern long saved_magic;
 
 extern int wakeup_pmode_return;
 
+extern u8 wake_sleep_flags;
+extern asmlinkage void acpi_enter_s3(void);
+
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
 extern void wakeup_long64(void);
 

arch/x86/kernel/acpi/wakeup_32.S

@@ -74,9 +74,7 @@ restore_registers:
 ENTRY(do_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
-	pushl	$3
-	call	acpi_enter_sleep_state
-	addl	$4, %esp
+	call	acpi_enter_s3
 
 #	In case of S3 failure, we'll emerge here.  Jump
 # 	to ret_point to recover

arch/x86/kernel/acpi/wakeup_64.S

@@ -71,9 +71,7 @@ ENTRY(do_suspend_lowlevel)
 	movq	%rsi, saved_rsi
 
 	addq	$8, %rsp
-	movl	$3, %edi
-	xorl	%eax, %eax
-	call	acpi_enter_sleep_state
+	call	acpi_enter_s3
 	/* in case something went wrong, restore the machine status and go on */
 	jmp	resume_point
 

arch/x86/kernel/apic/apic.c

@@ -1637,9 +1637,11 @@ static int __init apic_verify(void)
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 
 	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (l & MSR_IA32_APICBASE_ENABLE)
+			mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	}
 
 	pr_info("Found and enabled local APIC!\n");
 	return 0;
@@ -1657,13 +1659,15 @@ int __init apic_force_enable(unsigned long addr)
 	 * MSR. This can only be done in software for Intel P6 or later
 	 * and AMD K7 (Model > 1) or later.
 	 */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-		pr_info("Local APIC disabled by BIOS -- reenabling.\n");
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-		enabled_via_apicbase = 1;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
 	}
 	return apic_verify();
 }
@@ -2209,10 +2213,12 @@ static void lapic_resume(void)
 		 * FIXME! This will be wrong if we ever support suspend on
 		 * SMP! We'll need to do this as part of the CPU restore!
 		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
+		if (boot_cpu_data.x86 >= 6) {
+			rdmsr(MSR_IA32_APICBASE, l, h);
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+		}
 	}
 
 	maxlvt = lapic_get_maxlvt();

arch/x86/kernel/apic/apic_numachip.c

@@ -207,8 +207,11 @@ static void __init map_csrs(void)
 
 static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
 {
-	c->phys_proc_id = node;
-	per_cpu(cpu_llc_id, smp_processor_id()) = node;
+
+	if (c->phys_proc_id != node) {
+		c->phys_proc_id = node;
+		per_cpu(cpu_llc_id, smp_processor_id()) = node;
+	}
 }
 
 static int __init numachip_system_init(void)

arch/x86/kernel/cpu/amd.c

@@ -26,7 +26,8 @@
  *	contact AMD for precise details and a CPU swap.
  *
  *	See	http://www.multimania.com/poulot/k6bug.html
- *		http://www.amd.com/K6/k6docs/revgd.html
+ *	and	section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
+ *		(Publication # 21266  Issue Date: August 1998)
  *
  *	The following test is erm.. interesting. AMD neglected to up
  *	the chip setting when fixing the bug but they also tweaked some
@@ -94,7 +95,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 				"system stability may be impaired when more than 32 MB are used.\n");
 		else
 			printk(KERN_CONT "probably OK (after B9730xxxx).\n");
-		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
 	}
 
 	/* K6 with old style WHCR */
@@ -353,10 +353,11 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 		node = per_cpu(cpu_llc_id, cpu);
 
 	/*
-	 * If core numbers are inconsistent, it's likely a multi-fabric platform,
-	 * so invoke platform-specific handler
+	 * On multi-fabric platform (e.g. Numascale NumaChip) a
+	 * platform-specific handler needs to be called to fixup some
+	 * IDs of the CPU.
 	 */
-	if (c->phys_proc_id != node)
+	if (x86_cpuinit.fixup_cpu_id)
 		x86_cpuinit.fixup_cpu_id(c, node);
 
 	if (!node_online(node)) {

arch/x86/kernel/cpu/common.c

@@ -1162,15 +1162,6 @@ static void dbg_restore_debug_regs(void)
 #define dbg_restore_debug_regs()
 #endif /* ! CONFIG_KGDB */
 
-/*
- * Prints an error where the NUMA and configured core-number mismatch and the
- * platform didn't override this to fix it up
- */
-void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node)
-{
-	pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id);
-}
-
 /*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT

arch/x86/kernel/i387.c

@@ -235,6 +235,7 @@ int init_fpu(struct task_struct *tsk)
 	if (tsk_used_math(tsk)) {
 		if (HAVE_HWFP && tsk == current)
 			unlazy_fpu(tsk);
+		tsk->thread.fpu.last_cpu = ~0;
 		return 0;
 	}
 

arch/x86/kernel/microcode_amd.c

@@ -82,11 +82,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
-		pr_warning("CPU%d: family %d not supported\n", cpu, c->x86);
-		return -1;
-	}
-
 	csig->rev = c->microcode;
 	pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
 
@@ -380,6 +375,13 @@ static struct microcode_ops microcode_amd_ops = {
 
 struct microcode_ops * __init init_amd_microcode(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
+		return NULL;
+	}
+
 	patch = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!patch)
 		return NULL;

arch/x86/kernel/microcode_core.c

@@ -419,10 +419,8 @@ static int mc_device_add(struct device *dev, struct subsys_interface *sif)
 	if (err)
 		return err;
 
-	if (microcode_init_cpu(cpu) == UCODE_ERROR) {
-		sysfs_remove_group(&dev->kobj, &mc_attr_group);
+	if (microcode_init_cpu(cpu) == UCODE_ERROR)
 		return -EINVAL;
-	}
 
 	return err;
 }
@@ -528,11 +526,11 @@ static int __init microcode_init(void)
 		microcode_ops = init_intel_microcode();
 	else if (c->x86_vendor == X86_VENDOR_AMD)
 		microcode_ops = init_amd_microcode();
-
-	if (!microcode_ops) {
+	else
 		pr_err("no support for this CPU vendor\n");
+
+	if (!microcode_ops)
 		return -ENODEV;
-	}
 
 	microcode_pdev = platform_device_register_simple("microcode", -1,
 							 NULL, 0);

arch/x86/kernel/x86_init.c

@@ -93,7 +93,6 @@ struct x86_init_ops x86_init __initdata = {
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 	.early_percpu_clock_init	= x86_init_noop,
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
-	.fixup_cpu_id			= x86_default_fixup_cpu_id,
 };
 
 static void default_nmi_init(void) { };