Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3+: voltage: remove initial voltage OMAP4: Intialize IVA Device in addition to DSP device. omap: rx51: mark reserved memory earlier OMAP3: l3: fix for "irq 10: nobody cared" message arm: omap2: enable smc instruction for sleep34xx OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup. OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area OMAP4: clock data: Change DSS clock aliases OMAP2+: hwmod data: Fix wrong dma_system end address
mna · Apr 29, 2011 · 9748d4d · 9748d4d
2 parents fafc992 + 3b1fb2f
commit 9748d4d
Show file tree

Hide file tree

Showing 12 changed files with 56 additions and 18 deletions.
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
@@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
-AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
+AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 ifeq ($(CONFIG_PM_VERBOSE),y)
 CFLAGS_pm_bus.o				+= -DDEBUG

diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
@@ -141,14 +141,19 @@ static void __init rx51_init(void)
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_3xxx();
-	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
+static void __init rx51_reserve(void)
+{
+	rx51_video_mem_init();
+	omap_reserve();
+}
+
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <[email protected]> */
 	.boot_params	= 0x80000100,
-	.reserve	= omap_reserve,
+	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
 	.init_irq	= omap_init_irq,

diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
 	CLK("omapdss_dss",	"sys_clk",			&dss_sys_clk,	CK_443X),
 	CLK("omapdss_dss",	"tv_clk",			&dss_tv_clk,	CK_443X),
-	CLK("omapdss_dss",	"dss_clk",			&dss_dss_clk,	CK_443X),
 	CLK("omapdss_dss",	"video_clk",			&dss_48mhz_clk,	CK_443X),
-	CLK("omapdss_dss",	"fck",				&dss_fck,	CK_443X),
-	/*
-	 * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
-	 * with OMAP2/3.
-	 */
-	CLK("omapdss_dss",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omapdss_dss",	"fck",				&dss_dss_clk,	CK_443X),
+	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
 	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),

diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -247,6 +247,7 @@ struct omap3_cm_regs {
 	u32 per_cm_clksel;
 	u32 emu_cm_clksel;
 	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle;
 	u32 pll_cm_autoidle2;
 	u32 pll_cm_clksel4;
 	u32 pll_cm_clksel5;
@@ -319,6 +320,15 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
 	cm_context.emu_cm_clkstctrl =
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, even though this register has been saved in
+	 * scratchpad contents, we need to restore AUTO_PERIPH_DPLL
+	 * by ourselves. So, we need to save it anyway.
+	 */
+	cm_context.pll_cm_autoidle =
+		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
 	cm_context.pll_cm_autoidle2 =
 		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
 	cm_context.pll_cm_clksel4 =
@@ -441,6 +451,13 @@ void omap3_cm_restore_context(void)
 			       CM_CLKSEL1);
 	omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
 			       OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
+	 */
+	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
+			       CM_AUTOIDLE);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
 			       CM_AUTOIDLE2);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
@@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void)
 			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 	prcm_block_contents.cm_clken_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 */
 	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
 	prcm_block_contents.cm_clksel1_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
 	prcm_block_contents.cm_clksel2_pll =

diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio5_irqs),
 	.main_clk	= "gpio5_fck",
@@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
 	.main_clk	= "gpio1_ick",
@@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
 	.main_clk	= "gpio2_ick",
@@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
 	.main_clk	= "gpio3_ick",
@@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
 	.main_clk	= "gpio4_ick",
@@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
 	.main_clk	= "gpio5_ick",
@@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.name		= "gpio6",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio6_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
 	.main_clk	= "gpio6_ick",
@@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
 static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x4a056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x4a056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
 		/* No timeout error for debug sources */
 	}
 
-	base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source)));
-
 	/* identify the error source */
 	for (err_source = 0; !(status & (1 << err_source)); err_source++)
 									;
+
+	base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
 	error = omap3_l3_readll(base, L3_ERROR_LOG);
 
 	if (error) {

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
@@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void)
 	if (cpu_is_omap44xx()) {
 		_init_omap_device("l3_main_1", &l3_dev);
 		_init_omap_device("dsp", &dsp_dev);
+		_init_omap_device("iva", &iva_dev);
 	} else {
 		_init_omap_device("l3_main", &l3_dev);
 	}

diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
@@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
 	sys_clk_speed /= 1000;
 
 	/* Generic voltage parameters */
-	vdd->curr_volt = 1200000;
 	vdd->volt_scale = vp_forceupdate_scale_voltage;
 	vdd->vp_enabled = false;