platform:x86: add Intel P-Unit mailbox IPC driver

This driver provides support for P-Unit mailbox IPC on Intel platforms.
The heart of the P-Unit is the Foxton microcontroller and its firmware,
which provide mailbox interface for power management usage.

Signed-off-by: Qipeng Zha <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Darren Hart <[email protected]>

MAINTAINERS

@@ -5680,12 +5680,14 @@ F:	drivers/dma/mic_x100_dma.c
 F:	drivers/dma/mic_x100_dma.h
 F	Documentation/mic/
 
-INTEL PMC IPC DRIVER
+INTEL PMC/P-Unit IPC DRIVER
 M:	Zha Qipeng<[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	drivers/platform/x86/intel_pmc_ipc.c
+F:	drivers/platform/x86/intel_punit_ipc.c
 F:	arch/x86/include/asm/intel_pmc_ipc.h
+F:	arch/x86/include/asm/intel_punit_ipc.h
 
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <[email protected]>

arch/x86/include/asm/intel_punit_ipc.h

@@ -0,0 +1,101 @@
+#ifndef _ASM_X86_INTEL_PUNIT_IPC_H_
+#define  _ASM_X86_INTEL_PUNIT_IPC_H_
+
+/*
+ * Three types of 8bit P-Unit IPC commands are supported,
+ * bit[7:6]: [00]: BIOS; [01]: GTD; [10]: ISPD.
+ */
+typedef enum {
+	BIOS_IPC = 0,
+	GTDRIVER_IPC,
+	ISPDRIVER_IPC,
+	RESERVED_IPC,
+} IPC_TYPE;
+
+#define IPC_TYPE_OFFSET			6
+#define IPC_PUNIT_BIOS_CMD_BASE		(BIOS_IPC << IPC_TYPE_OFFSET)
+#define IPC_PUNIT_GTD_CMD_BASE		(GTDDRIVER_IPC << IPC_TYPE_OFFSET)
+#define IPC_PUNIT_ISPD_CMD_BASE		(ISPDRIVER_IPC << IPC_TYPE_OFFSET)
+#define IPC_PUNIT_CMD_TYPE_MASK		(RESERVED_IPC << IPC_TYPE_OFFSET)
+
+/* BIOS => Pcode commands */
+#define IPC_PUNIT_BIOS_ZERO			(IPC_PUNIT_BIOS_CMD_BASE | 0x00)
+#define IPC_PUNIT_BIOS_VR_INTERFACE		(IPC_PUNIT_BIOS_CMD_BASE | 0x01)
+#define IPC_PUNIT_BIOS_READ_PCS			(IPC_PUNIT_BIOS_CMD_BASE | 0x02)
+#define IPC_PUNIT_BIOS_WRITE_PCS		(IPC_PUNIT_BIOS_CMD_BASE | 0x03)
+#define IPC_PUNIT_BIOS_READ_PCU_CONFIG		(IPC_PUNIT_BIOS_CMD_BASE | 0x04)
+#define IPC_PUNIT_BIOS_WRITE_PCU_CONFIG		(IPC_PUNIT_BIOS_CMD_BASE | 0x05)
+#define IPC_PUNIT_BIOS_READ_PL1_SETTING		(IPC_PUNIT_BIOS_CMD_BASE | 0x06)
+#define IPC_PUNIT_BIOS_WRITE_PL1_SETTING	(IPC_PUNIT_BIOS_CMD_BASE | 0x07)
+#define IPC_PUNIT_BIOS_TRIGGER_VDD_RAM		(IPC_PUNIT_BIOS_CMD_BASE | 0x08)
+#define IPC_PUNIT_BIOS_READ_TELE_INFO		(IPC_PUNIT_BIOS_CMD_BASE | 0x09)
+#define IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0a)
+#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0b)
+#define IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0c)
+#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0d)
+#define IPC_PUNIT_BIOS_READ_TELE_TRACE		(IPC_PUNIT_BIOS_CMD_BASE | 0x0e)
+#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE		(IPC_PUNIT_BIOS_CMD_BASE | 0x0f)
+#define IPC_PUNIT_BIOS_READ_TELE_EVENT		(IPC_PUNIT_BIOS_CMD_BASE | 0x10)
+#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT		(IPC_PUNIT_BIOS_CMD_BASE | 0x11)
+#define IPC_PUNIT_BIOS_READ_MODULE_TEMP		(IPC_PUNIT_BIOS_CMD_BASE | 0x12)
+#define IPC_PUNIT_BIOS_RESERVED			(IPC_PUNIT_BIOS_CMD_BASE | 0x13)
+#define IPC_PUNIT_BIOS_READ_VOLTAGE_OVER	(IPC_PUNIT_BIOS_CMD_BASE | 0x14)
+#define IPC_PUNIT_BIOS_WRITE_VOLTAGE_OVER	(IPC_PUNIT_BIOS_CMD_BASE | 0x15)
+#define IPC_PUNIT_BIOS_READ_RATIO_OVER		(IPC_PUNIT_BIOS_CMD_BASE | 0x16)
+#define IPC_PUNIT_BIOS_WRITE_RATIO_OVER		(IPC_PUNIT_BIOS_CMD_BASE | 0x17)
+#define IPC_PUNIT_BIOS_READ_VF_GL_CTRL		(IPC_PUNIT_BIOS_CMD_BASE | 0x18)
+#define IPC_PUNIT_BIOS_WRITE_VF_GL_CTRL		(IPC_PUNIT_BIOS_CMD_BASE | 0x19)
+#define IPC_PUNIT_BIOS_READ_FM_SOC_TEMP_THRESH	(IPC_PUNIT_BIOS_CMD_BASE | 0x1a)
+#define IPC_PUNIT_BIOS_WRITE_FM_SOC_TEMP_THRESH	(IPC_PUNIT_BIOS_CMD_BASE | 0x1b)
+
+/* GT Driver => Pcode commands */
+#define IPC_PUNIT_GTD_ZERO			(IPC_PUNIT_GTD_CMD_BASE | 0x00)
+#define IPC_PUNIT_GTD_CONFIG			(IPC_PUNIT_GTD_CMD_BASE | 0x01)
+#define IPC_PUNIT_GTD_READ_ICCP_LIC_CDYN_SCAL	(IPC_PUNIT_GTD_CMD_BASE | 0x02)
+#define IPC_PUNIT_GTD_WRITE_ICCP_LIC_CDYN_SCAL	(IPC_PUNIT_GTD_CMD_BASE | 0x03)
+#define IPC_PUNIT_GTD_GET_WM_VAL		(IPC_PUNIT_GTD_CMD_BASE | 0x06)
+#define IPC_PUNIT_GTD_WRITE_CONFIG_WISHREQ	(IPC_PUNIT_GTD_CMD_BASE | 0x07)
+#define IPC_PUNIT_GTD_READ_REQ_DUTY_CYCLE	(IPC_PUNIT_GTD_CMD_BASE | 0x16)
+#define IPC_PUNIT_GTD_DIS_VOL_FREQ_CHG_REQUEST	(IPC_PUNIT_GTD_CMD_BASE | 0x17)
+#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_CTRL	(IPC_PUNIT_GTD_CMD_BASE | 0x1a)
+#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_TUNING	(IPC_PUNIT_GTD_CMD_BASE | 0x1c)
+
+/* ISP Driver => Pcode commands */
+#define IPC_PUNIT_ISPD_ZERO			(IPC_PUNIT_ISPD_CMD_BASE | 0x00)
+#define IPC_PUNIT_ISPD_CONFIG			(IPC_PUNIT_ISPD_CMD_BASE | 0x01)
+#define IPC_PUNIT_ISPD_GET_ISP_LTR_VAL		(IPC_PUNIT_ISPD_CMD_BASE | 0x02)
+#define IPC_PUNIT_ISPD_ACCESS_IU_FREQ_BOUNDS	(IPC_PUNIT_ISPD_CMD_BASE | 0x03)
+#define IPC_PUNIT_ISPD_READ_CDYN_LEVEL		(IPC_PUNIT_ISPD_CMD_BASE | 0x04)
+#define IPC_PUNIT_ISPD_WRITE_CDYN_LEVEL		(IPC_PUNIT_ISPD_CMD_BASE | 0x05)
+
+/* Error codes */
+#define IPC_PUNIT_ERR_SUCCESS			0
+#define IPC_PUNIT_ERR_INVALID_CMD		1
+#define IPC_PUNIT_ERR_INVALID_PARAMETER		2
+#define IPC_PUNIT_ERR_CMD_TIMEOUT		3
+#define IPC_PUNIT_ERR_CMD_LOCKED		4
+#define IPC_PUNIT_ERR_INVALID_VR_ID		5
+#define IPC_PUNIT_ERR_VR_ERR			6
+
+#if IS_ENABLED(CONFIG_INTEL_PUNIT_IPC)
+
+int intel_punit_ipc_simple_command(int cmd, int para1, int para2);
+int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out);
+
+#else
+
+static inline int intel_punit_ipc_simple_command(int cmd,
+						  int para1, int para2)
+{
+	return -ENODEV;
+}
+
+static inline int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2,
+					  u32 *in, u32 *out)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_INTEL_PUNIT_IPC */
+
+#endif

drivers/platform/x86/Kconfig

@@ -944,4 +944,10 @@ config SURFACE_PRO3_BUTTON
 	depends on ACPI && INPUT
 	---help---
 	  This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3 tablet.
+
+config INTEL_PUNIT_IPC
+	tristate "Intel P-Unit IPC Driver"
+	---help---
+	  This driver provides support for Intel P-Unit Mailbox IPC mechanism,
+	  which is used to bridge the communications between kernel and P-Unit.
 endif # X86_PLATFORM_DEVICES

drivers/platform/x86/Makefile

@@ -62,3 +62,4 @@ obj-$(CONFIG_PVPANIC)           += pvpanic.o
 obj-$(CONFIG_ALIENWARE_WMI)	+= alienware-wmi.o
 obj-$(CONFIG_INTEL_PMC_IPC)	+= intel_pmc_ipc.o
 obj-$(CONFIG_SURFACE_PRO3_BUTTON)	+= surfacepro3_button.o
+obj-$(CONFIG_INTEL_PUNIT_IPC)  += intel_punit_ipc.o