Fix typos in Documentation/: 'S'

This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letter 'S'.

Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Alan Cox <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>

Documentation/RCU/whatisRCU.txt

@@ -582,7 +582,7 @@ The rcu_read_lock() and rcu_read_unlock() primitive read-acquire
 and release a global reader-writer lock.  The synchronize_rcu()
 primitive write-acquires this same lock, then immediately releases
 it.  This means that once synchronize_rcu() exits, all RCU read-side
-critical sections that were in progress before synchonize_rcu() was
+critical sections that were in progress before synchronize_rcu() was
 called are guaranteed to have completed -- there is no way that
 synchronize_rcu() would have been able to write-acquire the lock
 otherwise.

Documentation/block/biodoc.txt

@@ -890,7 +890,7 @@ Aside:
 
   Kvec i/o:
 
-  Ben LaHaise's aio code uses a slighly different structure instead
+  Ben LaHaise's aio code uses a slightly different structure instead
   of kiobufs, called a kvec_cb. This contains an array of <page, offset, len>
   tuples (very much like the networking code), together with a callback function
   and data pointer. This is embedded into a brw_cb structure when passed
@@ -988,7 +988,7 @@ elevator_exit_fn		Allocate and free any elevator specific storage
 				for a queue.
 
 4.2 Request flows seen by I/O schedulers
-All requests seens by I/O schedulers strictly follow one of the following three
+All requests seen by I/O schedulers strictly follow one of the following three
 flows.
 
  set_req_fn ->

Documentation/cpu-freq/cpufreq-stats.txt

@@ -1,5 +1,5 @@
 
-     CPU frequency and voltage scaling statictics in the Linux(TM) kernel
+     CPU frequency and voltage scaling statistics in the Linux(TM) kernel
 
 
              L i n u x    c p u f r e q - s t a t s   d r i v e r
@@ -18,8 +18,8 @@ Contents
 1. Introduction
 
 cpufreq-stats is a driver that provices CPU frequency statistics for each CPU.
-This statistics is provided in /sysfs as a bunch of read_only interfaces. This
-interface (when configured) will appear in a seperate directory under cpufreq
+These statistics are provided in /sysfs as a bunch of read_only interfaces. This
+interface (when configured) will appear in a separate directory under cpufreq
 in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
 Various statistics will form read_only files under this directory.
 
@@ -115,7 +115,7 @@ basic statistics which includes time_in_state and total_trans.
 
 "CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS)
 provides fine grained cpufreq stats by trans_table. The reason for having a
-seperate config option for trans_table is:
+separate config option for trans_table is:
 - trans_table goes against the traditional /sysfs rule of one value per
   interface. It provides a whole bunch of value in a 2 dimensional matrix
   form.

Documentation/dvb/cards.txt

@@ -5,7 +5,7 @@ Hardware supported by the linuxtv.org DVB drivers
   frontends (i.e. tuner / demodulator units) used, usually without
   changing the product name, revision number or specs. Some cards
   are also available in versions with different frontends for
-  DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed seperately.
+  DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed separately.
 
   Note 1: There is no guarantee that every frontend driver works
   out of the box with every card, because of different wiring.

Documentation/fb/sstfb.txt

@@ -137,23 +137,23 @@ Bugs
 	- The driver is 16 bpp only, 24/32 won't work.
 	- The driver is not your_favorite_toy-safe. this includes SMP...
           [Actually from inspection it seems to be safe - Alan]
-	- when using XFree86 FBdev (X over fbdev) you may see strange color
+	- When using XFree86 FBdev (X over fbdev) you may see strange color
 	patterns at the border of your windows (the pixels lose the lowest
-	byte -> basicaly the blue component nd some of the green) . I'm unable
+	byte -> basically the blue component and some of the green). I'm unable
 	to reproduce this with XFree86-3.3, but one of the testers has this
-	problem with XFree86-4. apparently recent Xfree86-4.x solve this
+	problem with XFree86-4. Apparently recent Xfree86-4.x solve this
 	problem.
 	- I didn't really test changing the palette, so you may find some weird
 	things when playing with that.
-	- Sometimes the driver will not recognise the DAC , and the
-        initialisation will fail. this is specificaly true for
-	voodoo 2 boards , but it should be solved in recent versions. please
-	contact me .
-	- the 24/32 is not likely to work anytime soon , knowing that the
-	hardware does ... unusual thigs in 24/32 bpp
-	- When used with anther video board, current limitations of linux
-	console subsystem can cause some troubles, specificaly, you should
-	disable software scrollback , as it can oops badly ...
+	- Sometimes the driver will not recognise the DAC, and the
+        initialisation will fail. This is specifically true for
+	voodoo 2 boards, but it should be solved in recent versions. Please
+	contact me.
+	- The 24/32 is not likely to work anytime soon, knowing that the
+	hardware does ... unusual things in 24/32 bpp.
+	- When used with another video board, current limitations of the linux
+	console subsystem can cause some troubles, specifically, you should
+	disable software scrollback, as it can oops badly ...
 
 Todo
 

Documentation/filesystems/configfs/configfs.txt

@@ -254,7 +254,7 @@ using the group _init() functions on the group.
 
 Finally, when userspace calls rmdir(2) on the item or group,
 ct_group_ops->drop_item() is called.  As a config_group is also a
-config_item, it is not necessary for a seperate drop_group() method.
+config_item, it is not necessary for a separate drop_group() method.
 The subsystem must config_item_put() the reference that was initialized
 upon item allocation.  If a subsystem has no work to do, it may omit
 the ct_group_ops->drop_item() method, and configfs will call

Documentation/filesystems/proc.txt

@@ -1255,7 +1255,7 @@ to allocate (but not use) more memory than is actually available.
 		address space are refused. Used for a typical system. It
 		ensures a seriously wild allocation fails while allowing
 		overcommit to reduce swap usage.  root is allowed to
-		allocate slighly more memory in this mode. This is the
+		allocate slightly more memory in this mode. This is the
 		default.
 
 1	-	Always overcommit. Appropriate for some scientific
@@ -1857,7 +1857,7 @@ proxy_qlen
 
 Maximum queue length of the delayed proxy arp timer. (see proxy_delay).
 
-app_solcit
+app_solicit
 ----------
 
 Determines the  number of requests to send to the user level ARP daemon. Use 0

Documentation/hrtimers.txt

@@ -58,7 +58,7 @@ several reasons why such integration is hard/impossible:
 The primary users of precision timers are user-space applications that
 utilize nanosleep, posix-timers and itimer interfaces. Also, in-kernel
 users like drivers and subsystems which require precise timed events
-(e.g. multimedia) can benefit from the availability of a seperate
+(e.g. multimedia) can benefit from the availability of a separate
 high-resolution timer subsystem as well.
 
 While this subsystem does not offer high-resolution clock sources just
@@ -68,7 +68,7 @@ The increasing demand for realtime and multimedia applications along
 with other potential users for precise timers gives another reason to
 separate the "timeout" and "precise timer" subsystems.
 
-Another potential benefit is that such a seperation allows even more
+Another potential benefit is that such a separation allows even more
 special-purpose optimization of the existing timer wheel for the low
 resolution and low precision use cases - once the precision-sensitive
 APIs are separated from the timer wheel and are migrated over to
@@ -96,8 +96,8 @@ file systems. The rbtree is solely used for time sorted ordering, while
 a separate list is used to give the expiry code fast access to the
 queued timers, without having to walk the rbtree.
 
-(This seperate list is also useful for later when we'll introduce
-high-resolution clocks, where we need seperate pending and expired
+(This separate list is also useful for later when we'll introduce
+high-resolution clocks, where we need separate pending and expired
 queues while keeping the time-order intact.)
 
 Time-ordered enqueueing is not purely for the purposes of

Documentation/input/yealink.txt

@@ -87,7 +87,7 @@ Line 3  Format			: 888888888888
 
 
 Format description:
-  From a user space perspective the world is seperated in "digits" and "icons".
+  From a userspace perspective the world is separated into "digits" and "icons".
   A digit can have a character set, an icon can only be ON or OFF.
 
   Format specifier

Documentation/kbuild/kconfig-language.txt

@@ -110,7 +110,7 @@ applicable everywhere (see syntax).
   the indentation level, this means it ends at the first line which has
   a smaller indentation than the first line of the help text.
   "---help---" and "help" do not differ in behaviour, "---help---" is
-  used to help visually seperate configuration logic from help within
+  used to help visually separate configuration logic from help within
   the file as an aid to developers.
 
 
@@ -226,7 +226,7 @@ menuconfig:
 	"menuconfig" <symbol>
 	<config options>
 
-This is similiar to the simple config entry above, but it also gives a
+This is similar to the simple config entry above, but it also gives a
 hint to front ends, that all suboptions should be displayed as a
 separate list of options.
 

Documentation/networking/slicecom.txt

@@ -262,7 +262,7 @@ which begin with '//' are the comments.
 //	initialised.
 // AUXP - Auxiliary Pattern Indication - 01010101.. received.
 // LFA  - Loss of Frame Alignment - no frame sync received.
-// RRA  - Receive Remote Alarm - the remote end's OK, but singnals error cond.
+// RRA  - Receive Remote Alarm - the remote end's OK, but signals error cond.
 // LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync.
 // NMF  - No Multiframe alignment Found after 400 msec - no such alarm using
 //	no-crc4 or crc4 framing, see below.
@@ -364,6 +364,6 @@ Treat them very carefully, these can cause much trouble!
 
 	# echo >lbireg 0x1d 0x21
 
-		- Swithing the loop off:
+		- Switching the loop off:
 
 	# echo >lbireg 0x1d 0x00

Documentation/networking/smctr.txt

@@ -11,7 +11,7 @@ This driver is rather simple to use. Select Y to Token Ring adapter support
 in the kernel configuration. A choice for SMC Token Ring adapters will
 appear. This drives supports all SMC ISA/MCA adapters. Choose this
 option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it staticly answer Y instead.
+you would like to compile it statically answer Y instead.
 
 This driver supports multiple adapters without the need to load multiple copies
 of the driver. You should be able to load up to 7 adapters without any kernel

Documentation/networking/tms380tr.txt

@@ -24,7 +24,7 @@ This driver is rather simple to use. Select Y to Token Ring adapter support
 in the kernel configuration. A choice for SysKonnect Token Ring adapters will
 appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this
 option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it staticly answer Y instead.
+you would like to compile it statically answer Y instead.
 
 This driver supports multiple adapters without the need to load multiple copies
 of the driver. You should be able to load up to 7 adapters without any kernel

Documentation/power/tricks.txt

@@ -9,7 +9,7 @@ If you want to trick swsusp/S3 into working, you might want to try:
 
 * turn off APIC and preempt
 
-* use ext2. At least it has working fsck. [If something seemes to go
+* use ext2. At least it has working fsck. [If something seems to go
   wrong, force fsck when you have a chance]
 
 * turn off modules

Documentation/powerpc/booting-without-of.txt

@@ -550,11 +550,11 @@ Here's the basic structure of a single node:
      * [child nodes if any]
      * token OF_DT_END_NODE (that is 0x00000002)
 
-So the node content can be summmarised as a start token, a full path,
-a list of properties, a list of child node and an end token. Every
+So the node content can be summarised as a start token, a full path,
+a list of properties, a list of child nodes, and an end token. Every
 child node is a full node structure itself as defined above.
 
-4) Device tree 'strings" block
+4) Device tree "strings" block
 
 In order to save space, property names, which are generally redundant,
 are stored separately in the "strings" block. This block is simply the

Documentation/rocket.txt

@@ -97,7 +97,7 @@ a range of I/O addresses for it to use. The first RocketPort card
 requires a 68-byte contiguous block of I/O addresses, starting at one
 of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h,
 0x300h, 0x340h, 0x380h.  This I/O address must be reflected in the DIP
-switiches of *all* of the Rocketport cards.
+switches of *all* of the Rocketport cards.
 
 The second, third, and fourth RocketPort cards require a 64-byte
 contiguous block of I/O addresses, starting at one of the following

Documentation/s390/Debugging390.txt

@@ -317,9 +317,9 @@ Each process/thread under Linux for S390 has its own kernel task_struct
 defined in linux/include/linux/sched.h
 The S390 on initialisation & resuming of a process on a cpu sets
 the __LC_KERNEL_STACK variable in the spare prefix area for this cpu
-( which we use for per processor globals).
+(which we use for per-processor globals).
 
-The kernel stack pointer is intimately tied with the task stucture for
+The kernel stack pointer is intimately tied with the task structure for
 each processor as follows.
 
                       s/390
@@ -973,8 +973,9 @@ through the pipe for each line containing the string open.
 
 Example 3
 ---------
-Getting sophistocated
-telnetd crashes on & I don't know why
+Getting sophisticated
+telnetd crashes & I don't know why
+
 Steps
 -----
 1) Replace the following line in /etc/inetd.conf
@@ -1836,7 +1837,7 @@ RDRLIST
 RECEIVE / LOG TXT A1 ( replace
 8)
 filel & press F11 to look at it
-You should see someting like.
+You should see something like:
 
 00020942' SSCH  B2334000    0048813C    CC 0    SCH 0000    DEV 7C08
           CPA 000FFDF0   PARM 00E2C9C4    KEY 0  FPI C0  LPM 80

Documentation/s390/monreader.txt

@@ -83,7 +83,7 @@ This loads the module and sets the DCSS name to "MYDCSS".
 
 NOTE:
 -----
-This API provides no interface to control the *MONITOR service, e.g. specifiy
+This API provides no interface to control the *MONITOR service, e.g. specify
 which data should be collected. This can be done by the CP command MONITOR
 (Class E privileged), see "CP Command and Utility Reference".
 

Documentation/scsi/aacraid.txt

@@ -4,7 +4,7 @@ Introduction
 -------------------------
 The aacraid driver adds support for Adaptec (http://www.adaptec.com)
 RAID controllers. This is a major rewrite from the original
-Adaptec supplied driver. It has signficantly cleaned up both the code
+Adaptec supplied driver. It has significantly cleaned up both the code
 and the running binary size (the module is less than half the size of
 the original).
 

Documentation/scsi/aic79xx.txt

@@ -81,7 +81,7 @@ The following information is available in this file:
           an SDTR with an offset of 0 to be sure the target
           knows we are async.  This works around a firmware defect
           in the Quantum Atlas 10K.
-        - Implement controller susupend and resume.
+        - Implement controller suspend and resume.
         - Clear PCI error state during driver attach so that we
           don't disable memory mapped I/O due to a stray write
           by some other driver probe that occurred before we

Documentation/scsi/aic7xxx_old.txt

@@ -241,7 +241,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
         that instead of dumping the register contents on the card, this
 	option dumps the contents of the sequencer program RAM.  This gives
 	the ability to verify that the instructions downloaded to the
-	card's sequencer are indeed what they are suppossed to be.  Again,
+	card's sequencer are indeed what they are supposed to be.  Again,
 	unless you have documentation to tell you how to interpret these
 	numbers, then it is totally useless.
 

Documentation/scsi/ibmmca.txt

@@ -309,9 +309,9 @@
    2.6 Abort & Reset Commands
    --------------------------
    These are implemented with busy waiting for interrupt to arrive.
-   ibmmca_reset() and ibmmca_abort() do not work sufficently well
-   up to now and need still a lot of development work. But, this seems
-   to be even a problem with other SCSI-low level drivers, too. However,
+   ibmmca_reset() and ibmmca_abort() do not work sufficiently well
+   up to now and need still a lot of development work. This seems
+   to be a problem with other low-level SCSI drivers too, however
    this should be no excuse.
 
    2.7 Disk Geometry
@@ -684,8 +684,8 @@
       not like sending commands to non-existing SCSI-devices and will react
       with a command error as a sign of protest. While this error is not
       present on IBM SCSI Adapter w/cache, it appears on IBM Integrated SCSI
-      Adapters. Therefore, I implemented a workarround to forgive those 
-      adapters their protests, but it is marked up in the statisctis, so
+      Adapters. Therefore, I implemented a workaround to forgive those 
+      adapters their protests, but it is marked up in the statistics, so
       after a successful boot, you can see in /proc/scsi/ibmmca/<host_number>
       how often the command errors have been forgiven to the SCSI-subsystem.
       If the number is bigger than 0, you have a SCSI subsystem of older
@@ -778,15 +778,15 @@
 	 not accept this, as they stick quite near to ANSI-SCSI and report
 	 a COMMAND_ERROR message which causes the driver to panic. The main
 	 problem was located around the INQUIRY command. Now, for all the
-	 mentioned commands, the buffersize, sent to the adapter is at 
+	 mentioned commands, the buffersize sent to the adapter is at 
 	 maximum 255 which seems to be a quite reasonable solution. 
-	 TEST_UNIT_READY gets a buffersize of 0 to make sure, that no 
+	 TEST_UNIT_READY gets a buffersize of 0 to make sure that no 
 	 data is transferred in order to avoid any possible command failure.
-      2) On unsuccessful TEST_UNIT_READY, the midlevel-driver has to send
-         a REQUEST_SENSE in order to see, where the problem is located. This
+      2) On unsuccessful TEST_UNIT_READY, the mid-level driver has to send
+         a REQUEST_SENSE in order to see where the problem is located. This
 	 REQUEST_SENSE may have various length in its answer-buffer. IBM
-	 SCSI-subsystems report a command failure, if the returned buffersize
-	 is different from the sent buffersize, but this can be supressed by
+	 SCSI-subsystems report a command failure if the returned buffersize
+	 is different from the sent buffersize, but this can be suppressed by
 	 a special bit, which is now done and problems seem to be solved.
    2) Code adaption to all kernel-releases. Now, the 3.2 code compiles on 
       2.0.x, 2.1.x, 2.2.x and 2.3.x kernel releases without any code-changes.
@@ -1156,7 +1156,7 @@
         Guide) what has to be done for reset, we still share the bad shape of
 	the reset functions with all other low level SCSI-drivers. 
 	Astonishingly, reset works in most cases quite ok, but the harddisks
-	won't run in synchonous mode anymore after a reset, until you reboot.
+	won't run in synchronous mode anymore after a reset, until you reboot.
      Q: Why does my XXX w/Cache adapter not use read-prefetch?
      A: Ok, that is not completely possible. If a cache is present, the 
         adapter tries to use it internally. Explicitly, one can use the cache

Documentation/scsi/ncr53c8xx.txt

@@ -70,7 +70,7 @@ Written by Gerard Roudier <[email protected]>
 15. SCSI problem troubleshooting
       15.1 Problem tracking
       15.2 Understanding hardware error reports
-16. Synchonous transfer negotiation tables
+16. Synchronous transfer negotiation tables
       16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers
       16.2 Synchronous timings for fast SCSI-2 53C8XX controllers
 17. Serial NVRAM support (by Richard Waltham)
@@ -1382,7 +1382,7 @@ SCSI standards, chip cores functionnals and internal driver data structures.
 You are not required to decode and understand them, unless you want to help 
 maintain the driver code.
 
-16. Synchonous transfer negotiation tables
+16. Synchronous transfer negotiation tables
 
 Tables below have been created by calling the routine the driver uses
 for synchronisation negotiation timing calculation and chip setting.