mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0

Currently it is not possible to have a kernel with built-in MCB attached devices. This results out of the fact that mcb-pci requests PCI BAR 0, then parses the chameleon table and calls the driver's probe function before releasing BAR 0 again. When building the kernel with modules this is not a problem (and therefore it wasn't detected by my tests yet). A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device. 0x200 bytes is the maximum size of a Chameleon v2 Table. Also this patch stops disabling the PCI device on successful registration of MCB devices. Signed-off-by: Johannes Thumshirn <[email protected]> Suggested-by: Bjorn Helgaas <[email protected]> Reviewed-by: Bjorn Helgaas <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
needcaffeine · Jan 9, 2015 · 7b7c549 · 7b7c549
1 parent 7e4a90c
commit 7b7c549
Show file tree

Hide file tree

Showing 2 changed files with 19 additions and 9 deletions.
diff --git a/drivers/mcb/mcb-internal.h b/drivers/mcb/mcb-internal.h
@@ -7,6 +7,7 @@
 #define PCI_DEVICE_ID_MEN_CHAMELEON	0x4d45
 #define CHAMELEON_FILENAME_LEN		12
 #define CHAMELEONV2_MAGIC		0xabce
+#define CHAM_HEADER_SIZE		0x200
 
 enum chameleon_descriptor_type {
 	CHAMELEON_DTYPE_GENERAL = 0x0,

diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c
@@ -17,6 +17,7 @@
 
 struct priv {
 	struct mcb_bus *bus;
+	phys_addr_t mapbase;
 	void __iomem *base;
 };
 
@@ -31,8 +32,8 @@ static int mcb_pci_get_irq(struct mcb_device *mdev)
 
 static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct resource *res;
 	struct priv *priv;
-	phys_addr_t mapbase;
 	int ret;
 	int num_cells;
 	unsigned long flags;
@@ -47,19 +48,21 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	mapbase = pci_resource_start(pdev, 0);
-	if (!mapbase) {
+	priv->mapbase = pci_resource_start(pdev, 0);
+	if (!priv->mapbase) {
 		dev_err(&pdev->dev, "No PCI resource\n");
 		goto err_start;
 	}
 
-	ret = pci_request_region(pdev, 0, KBUILD_MODNAME);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request PCI BARs\n");
+	res = request_mem_region(priv->mapbase, CHAM_HEADER_SIZE,
+				 KBUILD_MODNAME);
+	if (IS_ERR(res)) {
+		dev_err(&pdev->dev, "Failed to request PCI memory\n");
+		ret = PTR_ERR(res);
 		goto err_start;
 	}
 
-	priv->base = pci_iomap(pdev, 0, 0);
+	priv->base = ioremap(priv->mapbase, CHAM_HEADER_SIZE);
 	if (!priv->base) {
 		dev_err(&pdev->dev, "Cannot ioremap\n");
 		ret = -ENOMEM;
@@ -84,7 +87,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	priv->bus->get_irq = mcb_pci_get_irq;
 
-	ret = chameleon_parse_cells(priv->bus, mapbase, priv->base);
+	ret = chameleon_parse_cells(priv->bus, priv->mapbase, priv->base);
 	if (ret < 0)
 		goto err_drvdata;
 	num_cells = ret;
@@ -93,8 +96,10 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	mcb_bus_add_devices(priv->bus);
 
+	return 0;
+
 err_drvdata:
-	pci_iounmap(pdev, priv->base);
+	iounmap(priv->base);
 err_ioremap:
 	pci_release_region(pdev, 0);
 err_start:
@@ -107,6 +112,10 @@ static void mcb_pci_remove(struct pci_dev *pdev)
 	struct priv *priv = pci_get_drvdata(pdev);
 
 	mcb_release_bus(priv->bus);
+
+	iounmap(priv->base);
+	release_region(priv->mapbase, CHAM_HEADER_SIZE);
+	pci_disable_device(pdev);
 }
 
 static const struct pci_device_id mcb_pci_tbl[] = {